[PATCH 0/2] Increase the maximum cpu frequency of rk3288

[Kever Yang]

Hi Chris,

On 11/25/2014 05:37 PM, Chris Zhong wrote:
> The maximum cpu frequency of rk3288 can up to 1.8Ghz, but the vdd_cpu need set
> to 1.4v. I've tested these patches on rk3288 evb board.
I'm not sure why you need this patch, I think we have a discuss
for the cpu operating point before.
In this case:
1. rk3288.dtsi is for all the rk3288 Soc based system, you may need
a separate opp table in rk3288-evb-rk808.dts;
2. 1.4V may beyond the supported voltage range too much,
     and it's not a good idea to add it to rk3288.dtsi as a safe voltage.
3. Do you have a stress/heavy load test on evb with 1.4v at 1.8GHz?

- Kever
>
>
> Chris Zhong (2):
>    ARM: dts: rockchip: change the max voltage of cpu to 1.4v
>    ARM: dts: rk3288: change the max clk of cpu to 1.8Ghz
>
>   arch/arm/boot/dts/rk3288-evb-rk808.dts | 2 +-
>   arch/arm/boot/dts/rk3288.dtsi          | 6 ++++--
>   2 files changed, 5 insertions(+), 3 deletions(-)
>