[PATCH 7/7] KVM: arm64: guest debug, HW assisted debug support
Alex Bennée
alex.bennee at linaro.org
Tue Nov 25 08:10:05 PST 2014
This adds support for userspace to control the HW debug registers for
guest debug. We'll only copy the $ARCH defined number across as that's
all that hyp.S will use anyway. I've moved some helper functions into
the hw_breakpoint.h header for re-use.
As with single step we need to tweak the guest registers to enable the
exceptions but we don't want to overwrite the guest copy of these
registers so this is done close to the guest entry.
Two new capabilities have been added to the KVM_EXTENSION ioctl to allow
userspace to query the number of hardware break and watch points
available on the host hardware.
Signed-off-by: Alex Bennée <alex.bennee at linaro.org>
diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index 9383359..5e8c673 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -2593,7 +2593,7 @@ The top 16 bits of the control field are architecture specific control
flags which can include the following:
- KVM_GUESTDBG_USE_SW_BP: using software breakpoints [x86, arm64]
- - KVM_GUESTDBG_USE_HW_BP: using hardware breakpoints [x86, s390]
+ - KVM_GUESTDBG_USE_HW_BP: using hardware breakpoints [x86, s390, arm64]
- KVM_GUESTDBG_INJECT_DB: inject DB type exception [x86]
- KVM_GUESTDBG_INJECT_BP: inject BP type exception [x86]
- KVM_GUESTDBG_EXIT_PENDING: trigger an immediate guest exit [s390]
@@ -2606,7 +2606,10 @@ we need to ensure the guest vCPUs architecture specific registers are
updated to the correct (supplied) values.
The second part of the structure is architecture specific and
-typically contains a set of debug registers.
+typically contains a set of debug registers. For arm64 the number of
+debug registers is implementation defined and can be determined by
+querying the KVM_CAP_GUEST_DEBUG_HW_BPS and KVM_CAP_GUEST_DEBUG_HW_WPS
+capabilities.
When debug events exit the main run loop with the reason
KVM_EXIT_DEBUG with the kvm_debug_exit_arch part of the kvm_run
diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
index a76daae..c8ec23a 100644
--- a/arch/arm/kvm/arm.c
+++ b/arch/arm/kvm/arm.c
@@ -39,6 +39,7 @@
#include <asm/cacheflush.h>
#include <asm/virt.h>
#include <asm/debug-monitors.h>
+#include <asm/hw_breakpoint.h>
#include <asm/kvm_arm.h>
#include <asm/kvm_asm.h>
#include <asm/kvm_mmu.h>
@@ -341,8 +342,37 @@ int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
/* Hardware assisted Break and Watch points */
if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP) {
- kvm_info("HW BP support requested, not yet implemented\n");
- return -EINVAL;
+ int i;
+ int nb = get_num_brps();
+ int nw = get_num_wrps();
+
+ /* Copy across up to IMPDEF debug registers to our
+ * shadow copy in the vcpu structure. The hyp.S code
+ * will then set them up before we re-enter the guest.
+ */
+ memcpy(vcpu->arch.guest_debug_regs.dbg_bcr,
+ dbg->arch.dbg_bcr, sizeof(__u64)*nb);
+ memcpy(vcpu->arch.guest_debug_regs.dbg_bvr,
+ dbg->arch.dbg_bvr, sizeof(__u64)*nb);
+ memcpy(vcpu->arch.guest_debug_regs.dbg_wcr,
+ dbg->arch.dbg_wcr, sizeof(__u64)*nw);
+ memcpy(vcpu->arch.guest_debug_regs.dbg_wvr,
+ dbg->arch.dbg_wvr, sizeof(__u64)*nw);
+
+ kvm_info("HW BP support requested\n");
+ for (i = 0; i < nb; i++) {
+ kvm_info("%d: dbg_bcr=0x%llx dbg_bvr=0x%llx\n",
+ i,
+ vcpu->arch.guest_debug_regs.dbg_bcr[i],
+ vcpu->arch.guest_debug_regs.dbg_bvr[i]);
+ }
+ for (i = 0; i < nw; i++) {
+ kvm_info("%d: dbg_wcr=0x%llx dbg_wvr=0x%llx\n",
+ i,
+ vcpu->arch.guest_debug_regs.dbg_wcr[i],
+ vcpu->arch.guest_debug_regs.dbg_wvr[i]);
+ }
+ route_el2 = true;
}
/* If we are going to handle any debug exceptions we need to
diff --git a/arch/arm64/include/asm/hw_breakpoint.h b/arch/arm64/include/asm/hw_breakpoint.h
index 52b484b..c450552 100644
--- a/arch/arm64/include/asm/hw_breakpoint.h
+++ b/arch/arm64/include/asm/hw_breakpoint.h
@@ -130,6 +130,18 @@ static inline void ptrace_hw_copy_thread(struct task_struct *task)
}
#endif
+/* Determine number of BRP registers available. */
+static inline int get_num_brps(void)
+{
+ return ((read_cpuid(ID_AA64DFR0_EL1) >> 12) & 0xf) + 1;
+}
+
+/* Determine number of WRP registers available. */
+static inline int get_num_wrps(void)
+{
+ return ((read_cpuid(ID_AA64DFR0_EL1) >> 20) & 0xf) + 1;
+}
+
extern struct pmu perf_ops_bp;
#endif /* __KERNEL__ */
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index 38b0f07..e386bf4 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -103,8 +103,9 @@ struct kvm_vcpu_arch {
/* Exception Information */
struct kvm_vcpu_fault_info fault;
- /* Debug state */
+ /* Guest debug state */
u64 debug_flags;
+ struct kvm_guest_debug_arch guest_debug_regs;
/* Pointer to host CPU context */
kvm_cpu_context_t *host_cpu_context;
diff --git a/arch/arm64/kernel/asm-offsets.c b/arch/arm64/kernel/asm-offsets.c
index 78e5ae1..c9ecfd3 100644
--- a/arch/arm64/kernel/asm-offsets.c
+++ b/arch/arm64/kernel/asm-offsets.c
@@ -122,6 +122,10 @@ int main(void)
DEFINE(VCPU_HPFAR_EL2, offsetof(struct kvm_vcpu, arch.fault.hpfar_el2));
DEFINE(VCPU_DEBUG_FLAGS, offsetof(struct kvm_vcpu, arch.debug_flags));
DEFINE(GUEST_DEBUG, offsetof(struct kvm_vcpu, guest_debug));
+ DEFINE(GUEST_DEBUG_BCR, offsetof(struct kvm_vcpu, arch.guest_debug_regs.dbg_bcr));
+ DEFINE(GUEST_DEBUG_BVR, offsetof(struct kvm_vcpu, arch.guest_debug_regs.dbg_bvr));
+ DEFINE(GUEST_DEBUG_WCR, offsetof(struct kvm_vcpu, arch.guest_debug_regs.dbg_wcr));
+ DEFINE(GUEST_DEBUG_WVR, offsetof(struct kvm_vcpu, arch.guest_debug_regs.dbg_wvr));
DEFINE(VCPU_HCR_EL2, offsetof(struct kvm_vcpu, arch.hcr_el2));
DEFINE(VCPU_MDCR_EL2, offsetof(struct kvm_vcpu, arch.mdcr_el2));
DEFINE(VCPU_IRQ_LINES, offsetof(struct kvm_vcpu, arch.irq_lines));
diff --git a/arch/arm64/kernel/hw_breakpoint.c b/arch/arm64/kernel/hw_breakpoint.c
index df1cf15..45dcc6f 100644
--- a/arch/arm64/kernel/hw_breakpoint.c
+++ b/arch/arm64/kernel/hw_breakpoint.c
@@ -49,18 +49,6 @@ static DEFINE_PER_CPU(int, stepping_kernel_bp);
static int core_num_brps;
static int core_num_wrps;
-/* Determine number of BRP registers available. */
-static int get_num_brps(void)
-{
- return ((read_cpuid(ID_AA64DFR0_EL1) >> 12) & 0xf) + 1;
-}
-
-/* Determine number of WRP registers available. */
-static int get_num_wrps(void)
-{
- return ((read_cpuid(ID_AA64DFR0_EL1) >> 20) & 0xf) + 1;
-}
-
int hw_breakpoint_slots(int type)
{
/*
diff --git a/arch/arm64/kvm/handle_exit.c b/arch/arm64/kvm/handle_exit.c
index 6def054..d024e47 100644
--- a/arch/arm64/kvm/handle_exit.c
+++ b/arch/arm64/kvm/handle_exit.c
@@ -110,6 +110,42 @@ static int kvm_handle_ss(struct kvm_vcpu *vcpu, struct kvm_run *run)
return 0;
}
+/**
+ * kvm_handle_hw_bp - handle HW assisted break point
+ *
+ * @vcpu: the vcpu pointer
+ *
+ */
+static int kvm_handle_hw_bp(struct kvm_vcpu *vcpu, struct kvm_run *run)
+{
+ WARN_ON(!(vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP));
+
+ run->exit_reason = KVM_EXIT_DEBUG;
+ run->debug.arch.exit_type = KVM_DEBUG_EXIT_HW_BKPT;
+ run->debug.arch.address = *vcpu_pc(vcpu);
+ return 0;
+}
+
+/**
+ * kvm_handle_watch - handle HW assisted watch point
+ *
+ * @vcpu: the vcpu pointer
+ *
+ * These are basically the same as breakpoints (and indeed may use the
+ * breakpoint in a linked fashion). However they generate a specific
+ * exception so we trap it here for reporting to the guest.
+ *
+ */
+static int kvm_handle_watch(struct kvm_vcpu *vcpu, struct kvm_run *run)
+{
+ WARN_ON(!(vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP));
+
+ run->exit_reason = KVM_EXIT_DEBUG;
+ run->debug.arch.exit_type = KVM_DEBUG_EXIT_HW_WTPT;
+ run->debug.arch.address = *vcpu_pc(vcpu);
+ return 0;
+}
+
static exit_handle_fn arm_exit_handlers[] = {
[ESR_EL2_EC_WFI] = kvm_handle_wfx,
[ESR_EL2_EC_CP15_32] = kvm_handle_cp15_32,
@@ -125,6 +161,8 @@ static exit_handle_fn arm_exit_handlers[] = {
[ESR_EL2_EC_IABT] = kvm_handle_guest_abort,
[ESR_EL2_EC_DABT] = kvm_handle_guest_abort,
[ESR_EL2_EC_SOFTSTP] = kvm_handle_ss,
+ [ESR_EL2_EC_WATCHPT] = kvm_handle_watch,
+ [ESR_EL2_EC_BREAKPT] = kvm_handle_hw_bp,
[ESR_EL2_EC_BKPT32] = kvm_handle_bkpt,
[ESR_EL2_EC_BRK64] = kvm_handle_bkpt,
};
diff --git a/arch/arm64/kvm/hyp.S b/arch/arm64/kvm/hyp.S
index b38ce3d..96f71ab 100644
--- a/arch/arm64/kvm/hyp.S
+++ b/arch/arm64/kvm/hyp.S
@@ -18,6 +18,7 @@
#include <linux/linkage.h>
#include <linux/kvm.h>
+#include <uapi/asm/kvm.h>
#include <asm/assembler.h>
#include <asm/memory.h>
#include <asm/asm-offsets.h>
@@ -174,6 +175,7 @@
ldr x3, [x0, #GUEST_DEBUG]
tbz x3, #KVM_GUESTDBG_ENABLE_SHIFT, 2f // No guest debug
+ // Both Step and HW BP/WP ops need to modify spsr_el2 and mdscr_el1
// x0 - preserved as VCPU ptr
// x1 - spsr
// x2 - mdscr
@@ -191,6 +193,11 @@
eor x1, x1, #DBG_SPSR_SS
eor x2, x2, #DBG_MDSCR_SS
1:
+ // If we are doing HW BP/WP - set MDSCR_EL1.KDE/MDE
+ tbz x3, #KVM_GUESTDBG_USE_HW_BP_SHIFT, 3f
+ orr x2, x2, #DBG_MDSCR_KDE
+ orr x2, x2, #DBG_MDSCR_MDE
+3:
msr spsr_el2, x1
msr mdscr_el1, x2
2:
@@ -815,6 +822,33 @@ __restore_debug:
ret
+/* Setup debug state for debug of guest */
+__setup_debug:
+ // x0: vcpu base address
+ // x3: ptr to guest registers passed to setup_debug_registers
+ // x5..x20/x26: trashed
+
+ mrs x26, id_aa64dfr0_el1
+ ubfx x24, x26, #12, #4 // Extract BRPs
+ ubfx x25, x26, #20, #4 // Extract WRPs
+ mov w26, #15
+ sub w24, w26, w24 // How many BPs to skip
+ sub w25, w26, w25 // How many WPs to skip
+
+ mov x4, x24
+ add x3, x0, #GUEST_DEBUG_BCR
+ setup_debug_registers dbgbcr
+ add x3, x0, #GUEST_DEBUG_BVR
+ setup_debug_registers dbgbvr
+
+ mov x4, x25
+ add x3, x0, #GUEST_DEBUG_WCR
+ setup_debug_registers dbgwcr
+ add x3, x0, #GUEST_DEBUG_WVR
+ setup_debug_registers dbgwvr
+
+ ret
+
__save_fpsimd:
save_fpsimd
ret
@@ -861,6 +895,13 @@ ENTRY(__kvm_vcpu_run)
bl __restore_sysregs
bl __restore_fpsimd
+ // Now is the time to set-up the debug registers if we
+ // are debugging the guest
+ ldr x3, [x0, #GUEST_DEBUG]
+ tbz x3, #KVM_GUESTDBG_USE_HW_BP_SHIFT, 2f
+ bl __setup_debug
+ b 1f
+2:
skip_debug_state x3, 1f
bl __restore_debug
1:
@@ -881,6 +922,11 @@ __kvm_vcpu_return:
bl __save_fpsimd
bl __save_sysregs
+ // If we are debugging the guest don't save debug registers
+ // otherwise we'll be trashing are only good copy we have.
+ ldr x3, [x0, #GUEST_DEBUG]
+ tbnz x3, #KVM_GUESTDBG_USE_HW_BP_SHIFT, 1f
+
skip_debug_state x3, 1f
bl __save_debug
1:
diff --git a/arch/arm64/kvm/reset.c b/arch/arm64/kvm/reset.c
index 70a7816..0de6caa 100644
--- a/arch/arm64/kvm/reset.c
+++ b/arch/arm64/kvm/reset.c
@@ -64,6 +64,12 @@ int kvm_arch_dev_ioctl_check_extension(long ext)
case KVM_CAP_ARM_EL1_32BIT:
r = cpu_has_32bit_el1();
break;
+ case KVM_CAP_GUEST_DEBUG_HW_BPS:
+ r = get_num_brps();
+ break;
+ case KVM_CAP_GUEST_DEBUG_HW_WPS:
+ r = get_num_wrps();
+ break;
default:
r = 0;
}
diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h
index 347e5b0..49a5f97 100644
--- a/include/uapi/linux/kvm.h
+++ b/include/uapi/linux/kvm.h
@@ -759,6 +759,8 @@ struct kvm_ppc_smmu_info {
#define KVM_CAP_PPC_FIXUP_HCALL 103
#define KVM_CAP_PPC_ENABLE_HCALL 104
#define KVM_CAP_CHECK_EXTENSION_VM 105
+#define KVM_CAP_GUEST_DEBUG_HW_BPS 106
+#define KVM_CAP_GUEST_DEBUG_HW_WPS 107
#ifdef KVM_CAP_IRQ_ROUTING
--
2.1.3
More information about the linux-arm-kernel
mailing list