[PATCH v19 0/5] Rockchip soc thermal driver
Eduardo Valentin
edubezval at gmail.com
Mon Nov 24 12:18:12 PST 2014
Hello Caesar,
On Mon, Nov 24, 2014 at 12:58:57PM +0800, Caesar Wang wrote:
> This series patchs tested on rk3288 SDK board and pinky-v1,v2 board.
> I believe the driver can be used on the rk3288-evb board.
>
> Add this driver, The system will shutdown when
> the thermal temperture over 100C.If for some reason we are unable to
> shut it down in orderly fashion (kernel is stuck holding a lock or similar)
> then hardware will reset it.
>
> The patchs 1/5,2/5 can applay Eduardo's Branch
> git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git
> [branch "next-kernel"]
> remote = origin
> merge = refs/heads/next
>
I applied your patches 1 and 2 in my -linus branch, and luckily will be
accepted for 3.19.
Thanks.
>
> The patchs 3/5,4/5,5/5 can apply Heiko's Branch
> https://github.com/mmind/linux-rockchip.git
For 3 - 5 you can add my:
Acked-by: Eduardo Valentin <edubezval at gmail.com>
Cheers,
Eduardo Valentin
> [branch "3.19-armsoc/dts"]
> remote = origin
> merge = refs/heads/wip/v3.19-armsoc/dts
>
> Changes in v19:
> - update driver to fit Eduardo new API design.
> https://patchwork.kernel.org/patch/5329801/
>
> Changes in v18:
> * address comments from Eduardo Valentin and Dmitry Torokhov.
> - we need reset tsadc-controller before enable tsadc auto mode,
> when we add the thermal function in coreboot,we always enable tsadc controller.
> So we need reset tsadc-controller to avoid the TSADC is abnormal.
> - put the document behind the driver.
> - Tested on pinky1,2,jeffy board,we will fix cooling-map temperature from 80C to 70C,
> critical temperature from 100C to 90C.
>
> Changes in v17:
> * address comments from Heiko Stubner and .
> - rename the tshut property
> - the critiacal temperature only indeed 100C when add the cooling map,
> it's for the more secure,fix the temperature from 120C to 100C.
>
> Changes in v16:
> * address comments from Dmitry Torokhov.
> - add thermal->chip->control(thermal->regs, false) in remove()
> - adjust TSHUT in resume().
>
> Changes in v15:
> * address comments from Dmitry Torokhov.
> - enable TSHUT move into rk_tsadcv2_tshut_temp().
> - drop the id argument in rk_tsadcv2_control().
>
> Changes in v14:
> * address comments from Dmitry Torokhov.
> - adjust-alarm-rate-depending-on-clock.
> - 0001-rockchip-thermal-do-not-register-cpufreq-cooling-dev.
>
> Changes in v13:
> - add cooling-maps for cpu-thermal.
> - put tshut polarity in device tree.
>
> Changes in v12:
> * address comments from Dmitry Torokhov and Vladimir Zapolskiy.
> - split-sensor-handling.
> - rename-rockchip_tsadc_platform_data.
>
> Changes in v11:
> * address comments from Vladimir Zapolskiy.
> - fix cpufreq_cooling_unregister() to put in correct position.
> - fix "data->chn",at least can get valid Tsensor temp.
>
> Changes in v10:
> * address comments from Doug Anderson.
> - fix TSHUT polarity,ensure support TSHUT.
> - add the decription for rk_tsadcv2_initialize().
>
> Changes in v9:
> * address comments from Dmitry Torokhov.
> - fix some style be defined
> - remove some unused code.
> - clk_disable_unprepare->clk_disable in suspend()
>
> Changes in v8:
> * address comments from Dmitry Torokhov and Doug Anderson.
> - add three Teperture Sensors.
> - support CRU and GPIO reset chip.
> - rename rk3xxx-cpu-thermal.dtsi as rk3288-thermal.dtsi
> - alarm-temp via set_trips() callback
> - remove "reset-gpios"
>
> Changes in v7:
> - fix get data->clk=0 when in probe() function.
> - fix some style code.
> - modify dts,main add rk3xxx-cpu-thermal.dtsi
>
> Changes in v6:
> * address comments from Tomeu Vizoso.
> - use thermal's generic framework.
>
> Changes in v5:
> * address comments from Eduardo Valentin,rui.zhang and Heiko Stubner:
> - with BIT() macro
> - manage clocks in suspend/resume.
> - license is fixed as GPLv2.
> - #include "thermal_core.h"->#include <linux/thermal.h>
> - use the generic trip-points.the hw-shut-temp isn't generic trip-points.
> - The method of binding and unbinding be fixed.
> - The pin-name tsadc->otp_out
>
> Changes in v4:
> * address comments from Jonathan Cameron,huangtao and zhaoyifeng:
> - this series thermal driver still be put in driver/thermal/
> - modify the thermal driver description.
>
> Changes in v3:(add dts configure)
> * address comments from Dmitry Torokhov and Arnd Bergmann:
> - fix clock-names in rockchip-thermal.txt
> - remove rockchip_thermal_control() in rockchip_set_mode()
> - fix some code style.
> - add dts configure.
>
> Changes in v2:
> * address comments from Heiko Stubner:
> - fix dt-bindings in rockchip-thermal.txt
> - remove Author mark
> - rename TSADC_XXX->TSADCV2_XXX,it eill ready to merge compatible other SoCs.
> - fix a identation
> - remove clk_set_rate(),it's no necessary.
> - fix the SIMPLE_DEV_PM_OPS() function style.
>
> Caesar Wang (5):
> thermal: rockchip: add driver for thermal
> dt-bindings: document Rockchip thermal
> ARM: dts: add RK3288 Thermal data
> ARM: dts: add main Thermal info to rk3288
> ARM: dts: enable Thermal on rk3288-evb board
>
> .../bindings/thermal/rockchip-thermal.txt | 45 ++
> arch/arm/boot/dts/rk3288-evb.dtsi | 5 +
> arch/arm/boot/dts/rk3288-thermal.dtsi | 58 ++
> arch/arm/boot/dts/rk3288.dtsi | 23 +
> drivers/thermal/Kconfig | 9 +
> drivers/thermal/Makefile | 1 +
> drivers/thermal/rockchip_thermal.c | 628 +++++++++++++++++++++
> 7 files changed, 769 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
> create mode 100644 arch/arm/boot/dts/rk3288-thermal.dtsi
> create mode 100644 drivers/thermal/rockchip_thermal.c
>
> --
> 1.9.1
>
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 473 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20141124/eaeb8f3f/attachment-0001.sig>
More information about the linux-arm-kernel
mailing list