[PATCH] ARM: dts: meson: enable Ethernet controller

[Carlo Caione]

On Sun, Nov 23, 2014 at 5:08 PM, Beniamino Galvani <b.galvani at gmail.com> wrote:
> Add a node for the Ethernet controller to Meson DTS file and
> enable it on the Geniatech ATV1200 board.
>
> Signed-off-by: Beniamino Galvani <b.galvani at gmail.com>
> ---
>  arch/arm/boot/dts/meson.dtsi         | 11 +++++++++++
>  arch/arm/boot/dts/meson6-atv1200.dts |  4 ++++
>  2 files changed, 15 insertions(+)
>
> diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
> index 03bcff8..4704b95 100644
> --- a/arch/arm/boot/dts/meson.dtsi
> +++ b/arch/arm/boot/dts/meson.dtsi
> @@ -143,5 +143,16 @@
>                         #size-cells = <0>;
>                         status = "disabled";
>                 };
> +
> +               ethmac: ethernet at c9410000 {
> +                       compatible = "amlogic,meson6-dwmac", "snps,dwmac";
> +                       reg = <0xc9410000 0x10000
> +                              0xc1108108 0x4>;
> +                       interrupts = <0 8 1>;
> +                       interrupt-names = "macirq";
> +                       clocks = <&clk81>;
> +                       clock-names = "stmmaceth";
> +                       status = "disabled";
> +               };
>         };
>  }; /* end of / */
> diff --git a/arch/arm/boot/dts/meson6-atv1200.dts b/arch/arm/boot/dts/meson6-atv1200.dts
> index d7d351a..1237faa 100644
> --- a/arch/arm/boot/dts/meson6-atv1200.dts
> +++ b/arch/arm/boot/dts/meson6-atv1200.dts
> @@ -64,3 +64,7 @@
>  &uart_AO {
>         status = "okay";
>  };
> +
> +&ethmac {
> +       status = "okay";
> +};
> --
> 1.9.1
>

Tested-by: Carlo Caione <carlo at caione.org>

Thanks,

-- 
Carlo Caione