[PATCH v2 2/9] clk: sunxi: Make sun4i_a10_mod0_data available outside of clk-mod0.c

[Hans de Goede]

The sun6i prcm has mod0 compatible clocks, these need a separate driver
because the prcm uses the mfd framework, but we do want to re-use the
standard mod0 clk handling from clk-mod0.c for this, export
sun4i_a10_mod0_data, so that the prcm mod0 clk driver can use this.

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 drivers/clk/sunxi/clk-mod0.c | 2 +-
 drivers/clk/sunxi/clk-mod0.h | 8 ++++++++
 2 files changed, 9 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/sunxi/clk-mod0.h

diff --git a/drivers/clk/sunxi/clk-mod0.c b/drivers/clk/sunxi/clk-mod0.c
index 5fb1f7e..7c06d42 100644
--- a/drivers/clk/sunxi/clk-mod0.c
+++ b/drivers/clk/sunxi/clk-mod0.c
@@ -67,7 +67,7 @@ static struct clk_factors_config sun4i_a10_mod0_config = {
 	.pwidth = 2,
 };
 
-static const struct factors_data sun4i_a10_mod0_data __initconst = {
+const struct factors_data sun4i_a10_mod0_data = {
 	.enable = 31,
 	.mux = 24,
 	.table = &sun4i_a10_mod0_config,
diff --git a/drivers/clk/sunxi/clk-mod0.h b/drivers/clk/sunxi/clk-mod0.h
new file mode 100644
index 0000000..49aa9ab
--- /dev/null
+++ b/drivers/clk/sunxi/clk-mod0.h
@@ -0,0 +1,8 @@
+#ifndef __MACH_SUNXI_CLK_MOD0_H
+#define __MACH_SUNXI_CLK_MOD0_H
+
+#include "clk-factors.h"
+
+extern const struct factors_data sun4i_a10_mod0_data;
+
+#endif
-- 
2.1.0