[PATCH] ARM: defconfig: imx_v6_v7_defconfig updates

[Shawn Guo]

From: Dmitry Lavnikevich <d.lavnikevich at sam-solutions.com>

This is a squash of several imx_v6_v7_defconfig update patches.

 - Enable tlv320aic3x audio codec by default (Phytec PBAB01 board)
 - Enable DS1307 rtc and gpio fan by default (TBS2910 board)
 - Select thermal related drivers
 - Add SNVS power off driver

Signed-off-by: Dmitry Lavnikevich <d.lavnikevich at sam-solutions.com>
Signed-off-by: Soeren Moch <smoch at web.de>
Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
Signed-off-by: Robin Gong <b38343 at freescale.com>
Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
---
 arch/arm/configs/imx_v6_v7_defconfig | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 8fca6e276b69..c7b8fba8654b 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -162,7 +162,13 @@ CONFIG_SPI_IMX=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_MC9S08DZ60=y
 CONFIG_GPIO_STMPE=y
-# CONFIG_HWMON is not set
+CONFIG_SENSORS_GPIO_FAN=y
+CONFIG_THERMAL=y
+CONFIG_CPU_THERMAL=y
+CONFIG_IMX_THERMAL=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_IMX=y
 CONFIG_WATCHDOG=y
 CONFIG_IMX2_WDT=y
 CONFIG_MFD_DA9052_I2C=y
@@ -210,6 +216,7 @@ CONFIG_SND_SOC_IMX_WM8962=y
 CONFIG_SND_SOC_IMX_SGTL5000=y
 CONFIG_SND_SOC_IMX_SPDIF=y
 CONFIG_SND_SOC_IMX_MC13783=y
+CONFIG_SND_SOC_TLV320AIC3X=y
 CONFIG_SND_SIMPLE_CARD=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
@@ -238,6 +245,7 @@ CONFIG_LEDS_TRIGGER_BACKLIGHT=y
 CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_DS1307=y
 CONFIG_RTC_DRV_ISL1208=y
 CONFIG_RTC_DRV_PCF8563=y
 CONFIG_RTC_DRV_MC13XXX=y
-- 
1.9.1