[PATCHv5 05/10] arm: mvebu: define and use common Armada 370 SPI pinctrl settings

[Andrew Lunn]

Hi Arnaud

> diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
> index 90e1286d414f..f1284ae0cddd 100644
> --- a/arch/arm/boot/dts/armada-370.dtsi
> +++ b/arch/arm/boot/dts/armada-370.dtsi
> @@ -197,6 +197,20 @@
>  				status = "disabled";
>  			};
>  
> +			/*
> +			 * Default SPI pinctrl setting, can be overwritten on
> +			 * board level if a different configuration is used.
> +			 */
> +			spi0: spi at 10600 {
> +				pinctrl-0 = <&spi0_pins1>;
> +				pinctrl-names = "default";
> +			};
> +
> +			spi1: spi at 10680 {
> +				pinctrl-0 = <&spi1_pins>;
> +				pinctrl-names = "default";
> +			};
> +

Again, ordering. It looks like these should be between l2-cache and i2c0.

       Andrew