[PATCH 2/3] ARM: OMAP2+: Move GPMC initcall to devices.c

[Tony Lindgren]

This will us allow to just move gpmc.c to live under drivers
in the next patch.

Note that we now also remove the omap specific check for the
initcall. That's OK as gpmc_probe() checks for the pdata
and bails out for other platforms compiled in.

Cc: Arnd Bergmann <arnd at arndb.de>
Cc: Roger Quadros <rogerq at ti.com>
Signed-off-by: Tony Lindgren <tony at atomide.com>
---
 arch/arm/mach-omap2/devices.c | 26 ++++++++++++++++++++++++++
 arch/arm/mach-omap2/gpmc.c    | 31 +------------------------------
 2 files changed, 27 insertions(+), 30 deletions(-)

diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 324f02b..110256a 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -445,3 +445,29 @@ static int __init omap2_init_devices(void)
 	return 0;
 }
 omap_arch_initcall(omap2_init_devices);
+
+static int __init omap_gpmc_init(void)
+{
+	struct omap_hwmod *oh;
+	struct platform_device *pdev;
+	char *oh_name = "gpmc";
+
+	/*
+	 * if the board boots up with a populated DT, do not
+	 * manually add the device from this initcall
+	 */
+	if (of_have_populated_dt())
+		return -ENODEV;
+
+	oh = omap_hwmod_lookup(oh_name);
+	if (!oh) {
+		pr_err("Could not look up %s\n", oh_name);
+		return -ENODEV;
+	}
+
+	pdev = omap_device_build("omap-gpmc", -1, oh, NULL, 0);
+	WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
+
+	return PTR_RET(pdev);
+}
+omap_postcore_initcall(omap_gpmc_init);
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index bc14f25..80dfb17 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -37,9 +37,6 @@
 #include <linux/platform_data/mtd-nand-omap2.h>
 #include <linux/platform_data/mtd-onenand-omap2.h>
 
-#include "soc.h"
-#include "omap_device.h"
-
 #include <asm/mach-types.h>
 
 #define	DEVICE_NAME		"omap-gpmc"
@@ -2010,35 +2007,9 @@ static __exit void gpmc_exit(void)
 
 }
 
-omap_postcore_initcall(gpmc_init);
+postcore_initcall(gpmc_init);
 module_exit(gpmc_exit);
 
-static int __init omap_gpmc_init(void)
-{
-	struct omap_hwmod *oh;
-	struct platform_device *pdev;
-	char *oh_name = "gpmc";
-
-	/*
-	 * if the board boots up with a populated DT, do not
-	 * manually add the device from this initcall
-	 */
-	if (of_have_populated_dt())
-		return -ENODEV;
-
-	oh = omap_hwmod_lookup(oh_name);
-	if (!oh) {
-		pr_err("Could not look up %s\n", oh_name);
-		return -ENODEV;
-	}
-
-	pdev = omap_device_build(DEVICE_NAME, -1, oh, NULL, 0);
-	WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
-
-	return PTR_RET(pdev);
-}
-omap_postcore_initcall(omap_gpmc_init);
-
 static irqreturn_t gpmc_handle_irq(int irq, void *dev)
 {
 	int i;
-- 
2.1.3