[PATCH RFC 0/3] power: mxs_power: add driver for mxs power subsystem

Stefan Wahren stefan.wahren at i2se.com
Thu Nov 20 12:14:34 PST 2014


This patch series adds support for Freescale i.MX23, i.xM28 power subsystem.

The idea for this driver was born in the discussion with Mark Rutland
about the mxs-regulator driver [1].

The main use is to trigger driver probing of the underlying DT child nodes
like on-chip regulators. But it's also the first step for cpufreq-dt support.

[1] - https://lkml.org/lkml/2014/9/29/283

Stefan Wahren (3):
  DT: add binding for mxs power subsystem
  power: mxs_power: add driver for mxs power subsystem
  ARM: dts: enable power subsystem for i.MX28

 .../devicetree/bindings/power/mxs_power.txt        |   23 ++
 arch/arm/boot/dts/imx28.dtsi                       |    6 +-
 drivers/power/Kconfig                              |    8 +
 drivers/power/Makefile                             |    1 +
 drivers/power/mxs_power.c                          |  226 ++++++++++++++++++++
 5 files changed, 263 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/power/mxs_power.txt
 create mode 100644 drivers/power/mxs_power.c

--
1.7.9.5




More information about the linux-arm-kernel mailing list