[PATCH v3 0/2] arm64: Add support for Juno development board
Liviu.Dudau at arm.com
Thu Nov 20 02:54:11 PST 2014
On Tue, Nov 11, 2014 at 05:32:09PM +0000, Liviu Dudau wrote:
> This patchset adds device tree support for ARM's AArch64 Juno development
> board. It enables use of various peripherals on the board, from USB and
> networking to I2C and PL011 UART.
> The patches can also be found in the repository at:
> git://github.com/ARM-software/linux.git juno/dts-for-armsoc
> for you to fetch.
Olof, Arnd, Kevin: are you OK with this patchset?
> Changes vs v2:
> - rebased on top of arm-soc/next/cleanup
> - Split the flat device tree into several files. Although some
> commonality still remains in the main .dts file with other
> devices trees (see psci node) it is not clear what benefits can
> be gained from moving such a small node into its own file.
> - Ordered nodes according to their address space
> - Removed ulpi_phy node as it was redundant and the bindings non-standard.
> v2 version: http://lkml.org/lkml/2014/11/10/242
> Best regards,
> Liviu Dudau (2):
> arm64: Create link to include/dt-bindings to enable C preprocessor
> arm64: Add Juno board device tree.
> arch/arm64/boot/dts/arm/Makefile | 1 +
> arch/arm64/boot/dts/arm/juno-clocks.dtsi | 45 ++++++
> arch/arm64/boot/dts/arm/juno-motherboard.dtsi | 129 +++++++++++++++
> arch/arm64/boot/dts/arm/juno.dts | 218 ++++++++++++++++++++++++++
> arch/arm64/boot/dts/include/dt-bindings | 1 +
> 5 files changed, 394 insertions(+)
> create mode 100644 arch/arm64/boot/dts/arm/juno-clocks.dtsi
> create mode 100644 arch/arm64/boot/dts/arm/juno-motherboard.dtsi
> create mode 100644 arch/arm64/boot/dts/arm/juno.dts
> create mode 120000 arch/arm64/boot/dts/include/dt-bindings
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
| I would like to |
| fix the world, |
| but they're not |
| giving me the |
\ source code! /
More information about the linux-arm-kernel