[PATCH 0/4] ARM: at91/dt: define RTT nodes

[Nicolas Ferre]

On 14/11/2014 11:08, Boris Brezillon :
> Hello,
> 
> This patch series define RTT and GPBR devices on all at91 SoCs
> embedding those blocks and enable them on the at91sam9g20ek and
> at91sam9m10g45ek boards (which are the boards I tested on).
> 
> Best Regards,
> 
> Boris
> 
> Boris Brezillon (4):
>   ARM: at91/dt: add RTT nodes to at91 dtsis
>   ARM: at91/dt: add GPBR nodes
>   ARM: at91/dt: enable the RTT block on the sam9g20ek board
>   ARM: at91/dt: enable the RTT block on the at91sam9m10g45ek board

On the whole series:

Acked-by: Nicolas Ferre <nicolas.ferre at atmel.com>

and stacked up on top of at91-3.19-dt2

Bye,

>  arch/arm/boot/dts/at91sam9260.dtsi          | 14 ++++++++++++++
>  arch/arm/boot/dts/at91sam9261.dtsi          | 14 ++++++++++++++
>  arch/arm/boot/dts/at91sam9263.dtsi          | 21 +++++++++++++++++++++
>  arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 14 ++++++++++++++
>  arch/arm/boot/dts/at91sam9g45.dtsi          | 14 ++++++++++++++
>  arch/arm/boot/dts/at91sam9m10g45ek.dts      |  9 +++++++++
>  arch/arm/boot/dts/at91sam9rl.dtsi           | 14 ++++++++++++++
>  7 files changed, 100 insertions(+)
> 


-- 
Nicolas Ferre