[PATCH v3 4/6] clk: sunxi: unify sun6i AHB1 clock with proper PLL6 pre-divider

[Maxime Ripard]

On Mon, Nov 17, 2014 at 03:04:29AM +0800, Chen-Yu Tsai wrote:
> Hi,
> 
> On Mon, Nov 17, 2014 at 1:02 AM, Maxime Ripard
> <maxime.ripard at free-electrons.com> wrote:
> > Hi,
> >
> > On Thu, Nov 13, 2014 at 02:08:33AM +0800, Chen-Yu Tsai wrote:
> >> This patch unifies the sun6i AHB1 clock, originally supported
> >> with separate mux and divider clks. It also adds support for
> >> the pre-divider on the PLL6 input, thus allowing the clock to
> >> be muxed to PLL6 with proper clock rate calculation.
> >>
> >> Signed-off-by: Chen-Yu Tsai <wens at csie.org>
> >> ---
> >> This patch produces a warning on of_io_request_and_map complaining
> >> about dropping the const modifier. I have a separate patch for fixing
> >> of_io_request_and_map.
> >> ---
> >>  Documentation/devicetree/bindings/clock/sunxi.txt |   2 +-
> >>  drivers/clk/sunxi/clk-sunxi.c                     | 208 ++++++++++++++++++++++
> >>  2 files changed, 209 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
> >> index 67b2b99..9dc4f55 100644
> >> --- a/Documentation/devicetree/bindings/clock/sunxi.txt
> >> +++ b/Documentation/devicetree/bindings/clock/sunxi.txt
> >> @@ -26,7 +26,7 @@ Required properties:
> >>       "allwinner,sun5i-a10s-ahb-gates-clk" - for the AHB gates on A10s
> >>       "allwinner,sun7i-a20-ahb-gates-clk" - for the AHB gates on A20
> >>       "allwinner,sun6i-a31-ar100-clk" - for the AR100 on A31
> >> -     "allwinner,sun6i-a31-ahb1-mux-clk" - for the AHB1 multiplexer on A31
> >> +     "allwinner,sun6i-a31-ahb1-clk" - for the AHB1 clock on A31
> >>       "allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31
> >>       "allwinner,sun8i-a23-ahb1-gates-clk" - for the AHB1 gates on A23
> >>       "allwinner,sun9i-a80-ahb0-gates-clk" - for the AHB0 gates on A80
> >> diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
> >> index 5702025..2bb769f 100644
> >> --- a/drivers/clk/sunxi/clk-sunxi.c
> >> +++ b/drivers/clk/sunxi/clk-sunxi.c
> >> @@ -20,6 +20,7 @@
> >>  #include <linux/of_address.h>
> >>  #include <linux/reset-controller.h>
> >>  #include <linux/spinlock.h>
> >> +#include <linux/log2.h>
> >
> > Why is this needed?
> >
> 
> For __roundup_pow_of_two.
> 
> >>  #include "clk-factors.h"
> >>
> >> @@ -1233,3 +1234,210 @@ static void __init sun9i_init_clocks(struct device_node *node)
> >>       sunxi_init_clocks(NULL, 0);
> >>  }
> >>  CLK_OF_DECLARE(sun9i_a80_clk_init, "allwinner,sun9i-a80", sun9i_init_clocks);
> >> +
> >> +/**
> >> + * sun6i_a31_ahb1_clk_setup() - Setup function for a31 ahb1 composite clk
> >> + */
> >
> > Why is that added to the A80 clock file ?
> 
> This is the clk-sunxi.c file.

Hmmm, right, this was a brainfart on my side.

This is an odd place to put it though. All the other clocks are
defined *before* the clock protection code, and you're defining it
after.

Plus, I'd really like to stop introducing new clocks to clk-sunxi.c
unless there's some strong reason to do so.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20141118/1e512a12/attachment.sig>