[PATCH v2] ARM: dts: add board dts file for Exynos3250-based Monk board
Chanwoo Choi
cw00.choi at samsung.com
Mon Nov 17 22:36:28 PST 2014
Dear Kukjin,
Could you please review or pick this patchset?
Best Regards,
Chanwoo Choi
On 10/08/2014 11:11 AM, YoungJun Cho wrote:
> From: Youngjun Cho <yj44.cho at samsung.com>
>
> This patch adds new board dts file to support Samsung Monk board which is
> based on Exynos3250 SoC and has different H/W configuration from Rinato.
>
> This patch is based on linux-samsung.git for-next branch and depends on
> [PATCHv2 0/2] ARM: dts: Add new board dts file for Exynos3250-based Rinato board
>
> Changes from v1:
> - The 'memory' entries coalesce into one entry
> - Removes useless space
> - Puts voltage-regulator-0 under the root node
>
> This dts file support following features:
> - eMMC
> - Main PMIC (Samsung S2MPS14)
> - Interface PMIC (Maxim MAX77836, MUIC, fuel-gauge, charger)
> - RTC of Exynos3250
> - ADC of Exynos3250 with NTC thermistor
> - I2S of Exynos3250
> - TMU of Exynos3250
> - Secure firmware for Exynos3250 secondary cpu boot
> - Serial ports of Exynos3250
> - gpio-key for power key
>
> Signed-off-by: Youngjun Cho <yj44.cho at samsung.com>
> Signed-off-by: Chanwoo Choi <cw00.choi at samsung.com>
> Signed-off-by: Inki Dae <inki.dae at samsung.com>
> Signed-off-by: Seung-Woo Kim <sw0312.kim at samsung.com>
> Signed-off-by: Jaehoon Chung <jh80.chung at samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
> ---
> arch/arm/boot/dts/Makefile | 3 +-
> arch/arm/boot/dts/exynos3250-monk.dts | 583 ++++++++++++++++++++++++++++++++++
> 2 files changed, 585 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/boot/dts/exynos3250-monk.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 5728918..0c8ae64 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -64,7 +64,8 @@ dtb-$(CONFIG_ARCH_BRCMSTB) += \
> dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \
> da850-evm.dtb
> dtb-$(CONFIG_ARCH_EFM32) += efm32gg-dk3750.dtb
> -dtb-$(CONFIG_ARCH_EXYNOS) += exynos3250-rinato.dtb \
> +dtb-$(CONFIG_ARCH_EXYNOS) += exynos3250-monk.dtb \
> + exynos3250-rinato.dtb \
> exynos4210-origen.dtb \
> exynos4210-smdkv310.dtb \
> exynos4210-trats.dtb \
> diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
> new file mode 100644
> index 0000000..615672f
> --- /dev/null
> +++ b/arch/arm/boot/dts/exynos3250-monk.dts
> @@ -0,0 +1,583 @@
> +/*
> + * Samsung's Exynos3250 based Monk board device tree source
> + *
> + * Copyright (c) 2014 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com
> + *
> + * Device tree source file for Samsung's Monk board which is based on
> + * Samsung Exynos3250 SoC.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +/dts-v1/;
> +#include "exynos3250.dtsi"
> +#include <dt-bindings/input/input.h>
> +
> +/ {
> + model = "Samsung Monk board";
> + compatible = "samsung,monk", "samsung,exynos3250", "samsung,exynos3";
> +
> + aliases {
> + i2c7 = &i2c_max77836;
> + };
> +
> + memory {
> + reg = <0x40000000 0x1ff00000>;
> + };
> +
> + chosen {
> + bootargs = "console=ttySAC1,115200N8 root=/dev/mmcblk0p15 rootwait earlyprintk panic=5";
> + };
> +
> + firmware at 0205F000 {
> + compatible = "samsung,secure-firmware";
> + reg = <0x0205F000 0x1000>;
> + };
> +
> + gpio_keys {
> + compatible = "gpio-keys";
> +
> + power_key {
> + interrupt-parent = <&gpx2>;
> + interrupts = <7 0>;
> + gpios = <&gpx2 7 1>;
> + linux,code = <KEY_POWER>;
> + label = "power key";
> + debounce-interval = <10>;
> + gpio-key,wakeup;
> + };
> + };
> +
> + vemmc_reg: voltage-regulator-0 {
> + compatible = "regulator-fixed";
> + regulator-name = "V_EMMC_2.8V-fixed";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + gpio = <&gpk0 2 0>;
> + enable-active-high;
> + };
> +
> + i2c_max77836: i2c-gpio-0 {
> + compatible = "i2c-gpio";
> + gpios = <&gpd0 2 0>, <&gpd0 3 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + max77836: subpmic at 25 {
> + compatible = "maxim,max77836";
> + interrupt-parent = <&gpx1>;
> + interrupts = <5 0>;
> + reg = <0x25>;
> + wakeup;
> +
> + muic: max77836-muic {
> + compatible = "maxim,max77836-muic";
> + };
> +
> + regulators {
> + compatible = "maxim,max77836-regulator";
> + safeout_reg: SAFEOUT {
> + regulator-name = "SAFEOUT";
> + };
> +
> + charger_reg: CHARGER {
> + regulator-name = "CHARGER";
> + regulator-min-microamp = <45000>;
> + regulator-max-microamp = <475000>;
> + regulator-boot-on;
> + };
> +
> + motor_reg: LDO1 {
> + regulator-name = "MOT_2.7V";
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <2700000>;
> + };
> +
> + LDO2 {
> + regulator-name = "UNUSED_LDO2";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <3950000>;
> + };
> + };
> +
> + charger {
> + compatible = "maxim,max77836-charger";
> +
> + maxim,constant-uvolt = <4350000>;
> + maxim,fast-charge-uamp = <225000>;
> + maxim,eoc-uamp = <7500>;
> + maxim,ovp-uvolt = <6500000>;
> + };
> + };
> + };
> +};
> +
> +&adc {
> + vdd-supply = <&ldo3_reg>;
> + status = "okay";
> + assigned-clocks = <&cmu CLK_SCLK_TSADC>;
> + assigned-clock-rates = <6000000>;
> +
> + thermistor-ap {
> + compatible = "ntc,ncp15wb473";
> + pullup-uv = <1800000>;
> + pullup-ohm = <100000>;
> + pulldown-ohm = <100000>;
> + io-channels = <&adc 0>;
> + };
> +
> + thermistor-battery {
> + compatible = "ntc,ncp15wb473";
> + pullup-uv = <1800000>;
> + pullup-ohm = <100000>;
> + pulldown-ohm = <100000>;
> + io-channels = <&adc 1>;
> + };
> +};
> +
> +&i2c_0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-slave-addr = <0x10>;
> + samsung,i2c-max-bus-freq = <100000>;
> + status = "okay";
> +
> + s2mps14_pmic at 66 {
> + compatible = "samsung,s2mps14-pmic";
> + interrupt-parent = <&gpx0>;
> + interrupts = <7 0>;
> + reg = <0x66>;
> + wakeup;
> +
> + s2mps14_osc: clocks {
> + compatible = "samsung,s2mps14-clk";
> + #clock-cells = <1>;
> + clock-output-names = "s2mps14_ap", "unused",
> + "s2mps14_bt";
> + };
> +
> + regulators {
> + ldo1_reg: LDO1 {
> + regulator-name = "VAP_ALIVE_1.0V";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + };
> +
> + ldo2_reg: LDO2 {
> + regulator-name = "VAP_M1_1.2V";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + };
> +
> + ldo3_reg: LDO3 {
> + regulator-name = "VCC_AP_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo4_reg: LDO4 {
> + regulator-name = "VAP_AVDD_PLL1";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo5_reg: LDO5 {
> + regulator-name = "VAP_PLL_ISO_1.0V";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + };
> +
> + ldo6_reg: LDO6 {
> + regulator-name = "VAP_MIPI_1.0V";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + };
> +
> + ldo7_reg: LDO7 {
> + regulator-name = "VAP_AVDD_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo8_reg: LDO8 {
> + regulator-name = "VAP_USB_3.0V";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-always-on;
> + };
> +
> + ldo9_reg: LDO9 {
> + regulator-name = "V_LPDDR_1.2V";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + };
> +
> + ldo10_reg: LDO10 {
> + regulator-name = "UNUSED_LDO10";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + };
> +
> + ldo11_reg: LDO11 {
> + regulator-name = "V_EMMC_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + samsung,ext-control-gpios = <&gpk0 2 0>;
> + };
> +
> + ldo12_reg: LDO12 {
> + regulator-name = "V_EMMC_2.8V";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + samsung,ext-control-gpios = <&gpk0 2 0>;
> + };
> +
> + ldo13_reg: LDO13 {
> + regulator-name = "VSENSOR_2.85V";
> + regulator-min-microvolt = <2850000>;
> + regulator-max-microvolt = <2850000>;
> + regulator-always-on;
> + };
> +
> + ldo14_reg: LDO14 {
> + regulator-name = "UNUSED_LDO14";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo15_reg: LDO15 {
> + regulator-name = "TSP_AVDD_3.3V";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + ldo16_reg: LDO16 {
> + regulator-name = "LCD_VDD_3.3V";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + ldo17_reg: LDO17 {
> + regulator-name = "UNUSED_LDO17";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo18_reg: LDO18 {
> + regulator-name = "UNUSED_LDO18";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo19_reg: LDO19 {
> + regulator-name = "TSP_VDD_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo20_reg: LDO20 {
> + regulator-name = "LCD_VDD_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo21_reg: LDO21 {
> + regulator-name = "UNUSED_LDO21";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + };
> +
> + ldo22_reg: LDO22 {
> + regulator-name = "UNUSED_LDO22";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + };
> +
> + ldo23_reg: LDO23 {
> + regulator-name = "UNUSED_LDO23";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + };
> +
> + ldo24_reg: LDO24 {
> + regulator-name = "UNUSED_LDO24";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo25_reg: LDO25 {
> + regulator-name = "UNUSED_LDO25";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + buck1_reg: BUCK1 {
> + regulator-name = "VAP_MIF_1.0V";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <900000>;
> + regulator-always-on;
> + };
> +
> + buck2_reg: BUCK2 {
> + regulator-name = "VAP_ARM_1.0V";
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <1150000>;
> + regulator-always-on;
> + };
> +
> + buck3_reg: BUCK3 {
> + regulator-name = "VAP_INT3D_1.0V";
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + };
> +
> + buck4_reg: BUCK4 {
> + regulator-name = "VCC_SUB_1.95V";
> + regulator-min-microvolt = <1950000>;
> + regulator-max-microvolt = <1950000>;
> + regulator-always-on;
> + };
> +
> + buck5_reg: BUCK5 {
> + regulator-name = "VCC_SUB_1.35V";
> + regulator-min-microvolt = <1350000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-always-on;
> + };
> + };
> + };
> +};
> +
> +&i2c_1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-slave-addr = <0x10>;
> + samsung,i2c-max-bus-freq = <400000>;
> + status = "okay";
> +
> + fuelgauge at 36 {
> + compatible = "maxim,max77836-battery";
> + interrupt-parent = <&gpx1>;
> + interrupts = <2 8>;
> + reg = <0x36>;
> + };
> +};
> +
> +&i2s2 {
> + status = "okay";
> +};
> +
> +&mshc_0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + num-slots = <1>;
> + broken-cd;
> + non-removable;
> + cap-mmc-highspeed;
> + desc-num = <4>;
> + mmc-hs200-1_8v;
> + card-detect-delay = <200>;
> + vmmc-supply = <&vemmc_reg>;
> + clock-frequency = <100000000>;
> + clock-freq-min-max = <400000 100000000>;
> + samsung,dw-mshc-ciu-div = <1>;
> + samsung,dw-mshc-sdr-timing = <0 1>;
> + samsung,dw-mshc-ddr-timing = <1 2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
> + bus-width = <8>;
> + status = "okay";
> +};
> +
> +&serial_0 {
> + assigned-clocks = <&cmu CLK_SCLK_UART0>;
> + assigned-clock-rates = <100000000>;
> + status = "okay";
> +};
> +
> +&serial_1 {
> + status = "okay";
> +};
> +
> +&tmu {
> + vtmu-supply = <&ldo7_reg>;
> + status = "okay";
> +};
> +
> +&rtc {
> + clocks = <&cmu CLK_RTC>, <&s2mps14_osc 0>;
> + clock-names = "rtc", "rtc_src";
> + status = "okay";
> +};
> +
> +&xusbxti {
> + clock-frequency = <24000000>;
> +};
> +
> +&pinctrl_0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&sleep0>;
> +
> + sleep0: sleep-state {
> + PIN_SLP(gpa0-0, INPUT, DOWN);
> + PIN_SLP(gpa0-1, INPUT, DOWN);
> + PIN_SLP(gpa0-2, INPUT, DOWN);
> + PIN_SLP(gpa0-3, INPUT, DOWN);
> + PIN_SLP(gpa0-4, INPUT, DOWN);
> + PIN_SLP(gpa0-5, INPUT, DOWN);
> + PIN_SLP(gpa0-6, INPUT, DOWN);
> + PIN_SLP(gpa0-7, INPUT, DOWN);
> +
> + PIN_SLP(gpa1-0, INPUT, DOWN);
> + PIN_SLP(gpa1-1, INPUT, DOWN);
> + PIN_SLP(gpa1-2, INPUT, DOWN);
> + PIN_SLP(gpa1-3, INPUT, DOWN);
> + PIN_SLP(gpa1-4, INPUT, DOWN);
> + PIN_SLP(gpa1-5, INPUT, DOWN);
> +
> + PIN_SLP(gpb-0, PREV, NONE);
> + PIN_SLP(gpb-1, PREV, NONE);
> + PIN_SLP(gpb-2, PREV, NONE);
> + PIN_SLP(gpb-3, PREV, NONE);
> + PIN_SLP(gpb-4, INPUT, DOWN);
> + PIN_SLP(gpb-5, INPUT, DOWN);
> + PIN_SLP(gpb-6, INPUT, DOWN);
> + PIN_SLP(gpb-7, INPUT, DOWN);
> +
> + PIN_SLP(gpc0-0, INPUT, DOWN);
> + PIN_SLP(gpc0-1, INPUT, DOWN);
> + PIN_SLP(gpc0-2, INPUT, DOWN);
> + PIN_SLP(gpc0-3, INPUT, DOWN);
> + PIN_SLP(gpc0-4, INPUT, DOWN);
> +
> + PIN_SLP(gpc1-0, INPUT, DOWN);
> + PIN_SLP(gpc1-1, INPUT, DOWN);
> + PIN_SLP(gpc1-2, INPUT, DOWN);
> + PIN_SLP(gpc1-3, INPUT, DOWN);
> + PIN_SLP(gpc1-4, INPUT, DOWN);
> +
> + PIN_SLP(gpd0-0, INPUT, DOWN);
> + PIN_SLP(gpd0-1, INPUT, DOWN);
> + PIN_SLP(gpd0-2, INPUT, NONE);
> + PIN_SLP(gpd0-3, INPUT, NONE);
> +
> + PIN_SLP(gpd1-0, INPUT, NONE);
> + PIN_SLP(gpd1-1, INPUT, NONE);
> + PIN_SLP(gpd1-2, INPUT, NONE);
> + PIN_SLP(gpd1-3, INPUT, NONE);
> + };
> +};
> +
> +&pinctrl_1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&sleep1>;
> +
> + sleep1: sleep-state {
> + PIN_SLP(gpe0-0, PREV, NONE);
> + PIN_SLP(gpe0-1, PREV, NONE);
> + PIN_SLP(gpe0-2, INPUT, DOWN);
> + PIN_SLP(gpe0-3, INPUT, DOWN);
> + PIN_SLP(gpe0-4, PREV, NONE);
> + PIN_SLP(gpe0-5, INPUT, DOWN);
> + PIN_SLP(gpe0-6, INPUT, DOWN);
> + PIN_SLP(gpe0-7, INPUT, DOWN);
> +
> + PIN_SLP(gpe1-0, INPUT, DOWN);
> + PIN_SLP(gpe1-1, PREV, NONE);
> + PIN_SLP(gpe1-2, INPUT, DOWN);
> + PIN_SLP(gpe1-3, INPUT, DOWN);
> + PIN_SLP(gpe1-4, INPUT, DOWN);
> + PIN_SLP(gpe1-5, INPUT, DOWN);
> + PIN_SLP(gpe1-6, INPUT, DOWN);
> + PIN_SLP(gpe1-7, INPUT, NONE);
> +
> + PIN_SLP(gpe2-0, INPUT, NONE);
> + PIN_SLP(gpe2-1, INPUT, NONE);
> + PIN_SLP(gpe2-2, INPUT, NONE);
> +
> + PIN_SLP(gpk0-0, INPUT, DOWN);
> + PIN_SLP(gpk0-1, INPUT, DOWN);
> + PIN_SLP(gpk0-2, OUT0, NONE);
> + PIN_SLP(gpk0-3, INPUT, DOWN);
> + PIN_SLP(gpk0-4, INPUT, DOWN);
> + PIN_SLP(gpk0-5, INPUT, DOWN);
> + PIN_SLP(gpk0-6, INPUT, DOWN);
> + PIN_SLP(gpk0-7, INPUT, DOWN);
> +
> + PIN_SLP(gpk1-0, PREV, NONE);
> + PIN_SLP(gpk1-1, PREV, NONE);
> + PIN_SLP(gpk1-2, INPUT, DOWN);
> + PIN_SLP(gpk1-3, PREV, NONE);
> + PIN_SLP(gpk1-4, PREV, NONE);
> + PIN_SLP(gpk1-5, PREV, NONE);
> + PIN_SLP(gpk1-6, PREV, NONE);
> +
> + PIN_SLP(gpk2-0, INPUT, DOWN);
> + PIN_SLP(gpk2-1, INPUT, DOWN);
> + PIN_SLP(gpk2-2, INPUT, DOWN);
> + PIN_SLP(gpk2-3, INPUT, DOWN);
> + PIN_SLP(gpk2-4, INPUT, DOWN);
> + PIN_SLP(gpk2-5, INPUT, DOWN);
> + PIN_SLP(gpk2-6, INPUT, DOWN);
> +
> + PIN_SLP(gpl0-0, INPUT, DOWN);
> + PIN_SLP(gpl0-1, INPUT, DOWN);
> + PIN_SLP(gpl0-2, INPUT, DOWN);
> + PIN_SLP(gpl0-3, INPUT, DOWN);
> +
> + PIN_SLP(gpm0-0, INPUT, DOWN);
> + PIN_SLP(gpm0-1, INPUT, DOWN);
> + PIN_SLP(gpm0-2, INPUT, DOWN);
> + PIN_SLP(gpm0-3, INPUT, DOWN);
> + PIN_SLP(gpm0-4, INPUT, DOWN);
> + PIN_SLP(gpm0-5, INPUT, DOWN);
> + PIN_SLP(gpm0-6, INPUT, DOWN);
> + PIN_SLP(gpm0-7, INPUT, DOWN);
> +
> + PIN_SLP(gpm1-0, INPUT, DOWN);
> + PIN_SLP(gpm1-1, INPUT, DOWN);
> + PIN_SLP(gpm1-2, INPUT, DOWN);
> + PIN_SLP(gpm1-3, INPUT, DOWN);
> + PIN_SLP(gpm1-4, INPUT, DOWN);
> + PIN_SLP(gpm1-5, INPUT, DOWN);
> + PIN_SLP(gpm1-6, INPUT, DOWN);
> +
> + PIN_SLP(gpm2-0, INPUT, DOWN);
> + PIN_SLP(gpm2-1, INPUT, DOWN);
> + PIN_SLP(gpm2-2, INPUT, DOWN);
> + PIN_SLP(gpm2-3, INPUT, DOWN);
> + PIN_SLP(gpm2-4, INPUT, DOWN);
> +
> + PIN_SLP(gpm3-0, INPUT, DOWN);
> + PIN_SLP(gpm3-1, INPUT, DOWN);
> + PIN_SLP(gpm3-2, INPUT, DOWN);
> + PIN_SLP(gpm3-3, INPUT, DOWN);
> + PIN_SLP(gpm3-4, INPUT, DOWN);
> + PIN_SLP(gpm3-5, INPUT, DOWN);
> + PIN_SLP(gpm3-6, INPUT, DOWN);
> + PIN_SLP(gpm3-7, INPUT, DOWN);
> +
> + PIN_SLP(gpm4-0, INPUT, DOWN);
> + PIN_SLP(gpm4-1, INPUT, DOWN);
> + PIN_SLP(gpm4-2, INPUT, DOWN);
> + PIN_SLP(gpm4-3, INPUT, DOWN);
> + PIN_SLP(gpm4-4, INPUT, DOWN);
> + PIN_SLP(gpm4-5, INPUT, DOWN);
> + PIN_SLP(gpm4-6, INPUT, DOWN);
> + PIN_SLP(gpm4-7, INPUT, DOWN);
> + };
> +};
>
More information about the linux-arm-kernel
mailing list