[PATCHv3 10/12] arm: mvebu: define and use common Armada XP SPI pinctrl setting
Arnaud Ebalard
arno at natisbad.org
Mon Nov 17 15:28:14 PST 2014
This patch defines common Armada XP pinctrl settings in armada-xp.dtsi
for the supported SPI interface (MPP36-39) and use it as default
for Armada XP spi interface.
Note: this patch has the potential to break out-of-tree users w/o
specific pinctrl settings for their spi interfaces if the default
above does not match their config (i.e. if they do not use CS0).
Signed-off-by: Arnaud Ebalard <arno at natisbad.org>
---
arch/arm/boot/dts/armada-xp-axpwifiap.dts | 7 -------
arch/arm/boot/dts/armada-xp.dtsi | 11 +++++++++++
2 files changed, 11 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
index 7a6e50632a1f..804496edac9a 100644
--- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
@@ -69,11 +69,6 @@
marvell,function = "gpio";
};
- pmx_spi: pmx-spi {
- marvell,pins = "mpp36", "mpp37", "mpp38", "mpp39";
- marvell,function = "spi";
- };
-
pmx_phy_int: pmx-phy-int {
marvell,pins = "mpp32";
marvell,function = "gpio";
@@ -120,8 +115,6 @@
spi0: spi at 10600 {
status = "okay";
- pinctrl-0 = <&pmx_spi>;
- pinctrl-names = "default";
spi-flash at 0 {
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index 4f685f7ec273..51454de322b1 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -72,6 +72,17 @@
"mpp20", "mpp21", "mpp22", "mpp23";
marvell,function = "ge1";
};
+
+ spi0_pins: spi0-pins {
+ marvell,pins = "mpp36", "mpp37",
+ "mpp38", "mpp39";
+ marvell,function = "spi";
+ };
+ };
+
+ spi0: spi at 10600 {
+ pinctrl-0 = <&spi0_pins>;
+ pinctrl-names = "default";
};
i2c0: i2c at 11000 {
--
2.1.1
More information about the linux-arm-kernel
mailing list