[PATCH v8 04/13] ARM: dts: berlin: add a required reset property in the chip controller node

[Antoine Tenart]

The chip controller node now also describes the Marvell Berlin reset
controller. Add the required 'reset-cells' property.

Signed-off-by: Antoine Tenart <antoine.tenart at free-electrons.com>
Acked-by: Philipp Zabel <p.zabel at pengutronix.de>
---
 arch/arm/boot/dts/berlin2.dtsi   | 1 +
 arch/arm/boot/dts/berlin2cd.dtsi | 1 +
 arch/arm/boot/dts/berlin2q.dtsi  | 1 +
 3 files changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
index 9d7c810ebd0b..d7e81e124de0 100644
--- a/arch/arm/boot/dts/berlin2.dtsi
+++ b/arch/arm/boot/dts/berlin2.dtsi
@@ -249,6 +249,7 @@
 		chip: chip-control at ea0000 {
 			compatible = "marvell,berlin2-chip-ctrl";
 			#clock-cells = <1>;
+			#reset-cells = <2>;
 			reg = <0xea0000 0x400>;
 			clocks = <&refclk>;
 			clock-names = "refclk";
diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi
index cc1df65da504..68f7032b4686 100644
--- a/arch/arm/boot/dts/berlin2cd.dtsi
+++ b/arch/arm/boot/dts/berlin2cd.dtsi
@@ -231,6 +231,7 @@
 		chip: chip-control at ea0000 {
 			compatible = "marvell,berlin2cd-chip-ctrl";
 			#clock-cells = <1>;
+			#reset-cells = <2>;
 			reg = <0xea0000 0x400>;
 			clocks = <&refclk>;
 			clock-names = "refclk";
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index 891d56b03922..2de8d6f8973c 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -349,6 +349,7 @@
 		chip: chip-control at ea0000 {
 			compatible = "marvell,berlin2q-chip-ctrl";
 			#clock-cells = <1>;
+			#reset-cells = <2>;
 			reg = <0xea0000 0x400>, <0xdd0170 0x10>;
 			clocks = <&refclk>;
 			clock-names = "refclk";
-- 
2.1.0