[PATCHv2 5/8] arm: mvebu: add common uart0 and spi0 pintcrl entries for Armada 370

[Arnaud Ebalard]

pinctrl entries for uart0 using MPP0-1 and spi0 using MPP33-36 are
common configurations. Instead of replicating them in each .dts file,
put those in armada-370.dtsi file so that they can be referenced.

Suggested-by: Andrew Lunn <andrew at lunn.ch>
Signed-off-by: Arnaud Ebalard <arno at natisbad.org>
---
 arch/arm/boot/dts/armada-370.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 6b3c23b1e138..d9f5d59e463e 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -115,6 +115,17 @@
 				compatible = "marvell,mv88f6710-pinctrl";
 				reg = <0x18000 0x38>;
 
+				uart0_pins: uart0-pins {
+					marvell,pins = "mpp0", "mpp1";
+					marvell,function = "uart0";
+				};
+
+				spi0_pins: spi0-pins {
+					marvell,pins = "mpp33", "mpp34",
+						       "mpp35", "mpp36";
+					marvell,function = "spi0";
+				};
+
 				sdio_pins1: sdio-pins1 {
 					marvell,pins = "mpp9",  "mpp11", "mpp12",
 							"mpp13", "mpp14", "mpp15";
-- 
2.1.1