[PATCH 4/7] ARM: dts: sun6i: Add simplefb node

[Maxime Ripard]

On Fri, Nov 14, 2014 at 11:30:09AM +0100, Hans de Goede wrote:
> Hi,
> 
> On 11/14/2014 11:24 AM, Maxime Ripard wrote:
> > On Thu, Nov 13, 2014 at 06:52:57PM +0100, Hans de Goede wrote:
> >> Hi,
> >>
> >> On 11/13/2014 05:46 PM, Maxime Ripard wrote:
> >>> Hi,
> >>>
> >>> On Thu, Nov 13, 2014 at 10:31:46AM +0100, Hans de Goede wrote:
> >>>> Add a simplefb template node for u-boot to further fill and activate.
> >>>>
> >>>> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
> >>>> ---
> >>>>  arch/arm/boot/dts/sun6i-a31.dtsi | 10 ++++++++++
> >>>>  1 file changed, 10 insertions(+)
> >>>>
> >>>> diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
> >>>> index 543f895..438952e 100644
> >>>> --- a/arch/arm/boot/dts/sun6i-a31.dtsi
> >>>> +++ b/arch/arm/boot/dts/sun6i-a31.dtsi
> >>>> @@ -62,6 +62,16 @@
> >>>>  		ethernet0 = &gmac;
> >>>>  	};
> >>>>  
> >>>> +	chosen {
> >>>> +		#address-cells = <1>;
> >>>> +		#size-cells = <1>;
> >>>> +		ranges;
> >>>> +
> >>>> +		framebuffer0 {
> >>>> +			compatible = "simple-framebuffer";
> >>>> +			status = "disabled";
> >>>
> >>> Aren't we suppose to have clocks in there too?
> >>
> >> I deliberately left them out as they are not needed on sun6i, once the blocks
> >> are setup ahb access is not necessary, but it seems that the ahb_gate bits
> >> in sun4i / sun5i / sun7i double as a reset. Toggling them on / off / on breaks
> >> the mode, while toggling module clocks on / off / on only causes a glitch.
> >>
> >> Since the sun6i has a separate reset controller, the clock gates seem to really
> >> only control ahb access which is not necessary once the mode has been set up.
> > 
> > Ok. That can always be changed in the future if we ever find we need
> > them anyway.
> > 
> > I'll merge these four patches as soon as the bindings doc is
> > acked-by/merged by Grant or any other DT maintainer.
> 
> Note these patches are using framebuffer0 rather then framebuffer0-hdmi as node
> name, which may cause issues if we later want to add lcd support. So I've a v2
> coming which changes the name to framebuffer0-hdmi, please merge that instead.

Ok :)

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20141114/a59d0473/attachment.sig>