[PATCH 2/2] ARM: tegra: roth: Fix SD card VDD_IO regulator

[Alexandre Courbot]

vddio_sdmmc3 is a vdd_io, and thus should be under the vqmmc-supply
property, not vmmc-supply.

Signed-off-by: Alexandre Courbot <acourbot at nvidia.com>
---
 arch/arm/boot/dts/tegra114-roth.dts | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/tegra114-roth.dts
index 1f6eaba92f67..10f42553831f 100644
--- a/arch/arm/boot/dts/tegra114-roth.dts
+++ b/arch/arm/boot/dts/tegra114-roth.dts
@@ -916,8 +916,6 @@
 						regulator-name = "vddio-sdmmc3";
 						regulator-min-microvolt = <1800000>;
 						regulator-max-microvolt = <3300000>;
-						regulator-always-on;
-						regulator-boot-on;
 					};
 
 					ldousb {
@@ -962,7 +960,7 @@
 	sdhci at 78000400 {
 		status = "okay";
 		bus-width = <4>;
-		vmmc-supply = <&vddio_sdmmc3>;
+		vqmmc-supply = <&vddio_sdmmc3>;
 		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
 		power-gpios = <&gpio TEGRA_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
 	};
-- 
2.1.3