[PATCH v12 00/15] arm: Fix DEBUG_LL for multi-platform kernels (without PL01X)
Daniel Thompson
daniel.thompson at linaro.org
Wed Nov 12 06:48:56 PST 2014
On 24/10/14 16:46, Arnd Bergmann wrote:
> On Friday 24 October 2014 11:54:21 Daniel Thompson wrote:
>> This patchset removes some single-platform compatibility tricks related
>> to DEBUG_LL and, as a result, allows multi_v7_defconfig derived builds
>> to enable DEBUG_LL. Currently the user selected kbuild setting is
>> ignored and the PL01X's DEBUG_LL stub is silently selected instead. This
>> is a pain if your hardware doesn't have this cell, not least because it
>> takes a little time to figure out that kbuild built the wrong code.
>>
>
> Hi Daniel,
>
> All the patches in your series look good to me this time. If Russell
> has no further comments, I'd like to put them into a branch in arm-soc.
> It has turned out that a lot of changes in Kconfig.debug are for adding
> new platforms, so we have fewer conflicts if we take it this way.
Does this remain the plan?
At present I did not punt these to Russell's patch tracker...
> I would actually have put the defconfig changes into a combined patch,
> I don't see a reason to split those up by platform, but I don't mind
> merging them the way you have them either.
[I really thought I had already replied to this bit but can't find it in
my mailer].
I'll remember this in future. If you do decide it should be squashed
together then let me know (I nearly squashed them together but in the
end I couldn't think of a concise subject title saying what the had in
common).
> There is still a related bug that we should also fix, but I'd say let's
> take your current patches first and then add whatever is missing
> on top. Specifically, a snippet like this
>
> default 0xd4017000 if DEBUG_MMP_UART2
> default 0xd4018000 if DEBUG_MMP_UART3
> default 0xe0000000 if ARCH_SPEAR13XX
> default 0xe4007000 if DEBUG_HIP04_UART
> default 0xf0000be0 if ARCH_EBSA110
>
> still means you get the wrong default when you build a multiplatform
> kernel that you want to boot on HIP04 and you set DEBUG_HIP04_UART
> but you happen to also have ARCH_SPEAR13XX enabled.
Good spot.
> I have a patch that I use locally for randconfig builds that tries
> to fix this. It has some overlaps with your work but most parts are
> distinct. See below.
>
> Arnd
>
> diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
> index 64d0e21cf7e7..bb27d0b19197 100644
> --- a/arch/arm/Kconfig.debug
> +++ b/arch/arm/Kconfig.debug
> @@ -211,6 +211,14 @@ choice
> Say Y here if you want the debug print routines to direct
> their output to the serial port in the DC21285 (Footbridge).
>
> + config DEBUG_EP93XX
> + bool "Kernel low-level debugging messages via ep93xx UART"
> + depends on ARCH_EP93XX
> + select DEBUG_UART_PL01X
> + help
> + Say Y here if you want kernel low-level debugging support
> + on Cirrus Logic EP93xx based platforms.
> +
> config DEBUG_FOOTBRIDGE_COM1
> bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
> depends on FOOTBRIDGE
> @@ -218,6 +226,14 @@ choice
> Say Y here if you want the debug print routines to direct
> their output to the 8250 at PCI COM1.
>
> + config DEBUG_GEMINI
> + bool "Kernel low-level debugging messages via Cortina Systems Gemini UART"
> + depends on ARCH_GEMINI
> + select DEBUG_UART_8250
> + help
> + Say Y here if you want kernel low-level debugging support
> + on Cirrus Logic EP93xx based platforms.
> +
> config DEBUG_HI3620_UART
> bool "Hisilicon HI3620 Debug UART"
> depends on ARCH_HI3xxx
> @@ -351,6 +367,14 @@ choice
> Say Y here if you want kernel low-level debugging support
> on i.MX6SX.
>
> + config DEBUG_INTEGRATOR
> + bool "Kernel low-level debugging messages via ARM Integrator UART"
> + depends on ARCH_INTEGRATOR
> + select DEBUG_UART_PL01X
> + help
> + Say Y here if you want kernel low-level debugging support
> + on Cirrus Logic EP93xx based platforms.
> +
> config DEBUG_KEYSTONE_UART0
> bool "Kernel low-level debugging on KEYSTONE2 using UART0"
> depends on ARCH_KEYSTONE
> @@ -367,6 +391,14 @@ choice
> Say Y here if you want the debug print routines to direct
> their output to UART1 serial port on KEYSTONE2 devices.
>
> + config DEBUG_LPC32XX
> + bool "Kernel low-level debugging messages via NXP LPC32xx UART"
> + depends on ARCH_LPC32XX
> + select DEBUG_UART_8250
> + help
> + Say Y here if you want kernel low-level debugging support
> + on Cirrus Logic EP93xx based platforms.
> +
> config DEBUG_MESON_UARTAO
> bool "Kernel low-level debugging via Meson6 UARTAO"
> depends on ARCH_MESON
> @@ -427,7 +459,7 @@ choice
>
> config DEBUG_MVEBU_UART
> bool "Kernel low-level debugging messages via MVEBU UART (old bootloaders)"
> - depends on ARCH_MVEBU
> + depends on ARCH_MVEBU && CPU_V7
> select DEBUG_UART_8250
> help
> Say Y here if you want kernel low-level debugging support
> @@ -440,25 +472,40 @@ choice
> Plathome OpenBlocks AX3, when using the original
> bootloader.
>
> + This option will not work on older Marvell platforms
> + (Kirkwood, Dove, MV78xx0, Orion5x), which should piock
^^^^^^
piock?
> + the "new bootloader" variant.
> +
> If the wrong DEBUG_MVEBU_UART* option is selected,
> when u-boot hands over to the kernel, the system
> silently crashes, with no serial output at all.
>
> config DEBUG_MVEBU_UART_ALTERNATE
> bool "Kernel low-level debugging messages via MVEBU UART (new bootloaders)"
> - depends on ARCH_MVEBU
> + depends on ARCH_MVEBU || ARCH_DOVE || ARCH_KIRKWOOD || ARCH_MV78XX0 || ARCH_ORION5X
> select DEBUG_UART_8250
> help
> Say Y here if you want kernel low-level debugging support
> - on MVEBU based platforms.
> + on MVEBU based platforms (Armada XP, Armada 3xx, Kirkwood,
> + Dove, MV78xx0, Orion5x).
>
> This option should be used with the new bootloaders
> that remap the internal registers at 0xf1000000.
> + All of the older (pre Armada XP/370) platforms also use
> + this address, regardless of the boot loader version.
>
> If the wrong DEBUG_MVEBU_UART* option is selected,
> when u-boot hands over to the kernel, the system
> silently crashes, with no serial output at all.
>
> + config DEBUG_MT6589_UART0
> + bool "Mediatek mt6589 UART0"
> + depends on ARCH_MEDIATEK
> + select DEBUG_UART_8250
> + help
> + Say Y here if you want kernel low-level debugging support
> + for Mediatek mt6589 based platforms on UART0.
> +
> config DEBUG_VF_UART
> bool "Vybrid UART"
> depends on SOC_VF610
> @@ -823,6 +870,22 @@ choice
> Say Y here if you want the debug print routines to direct
> their output to the uart1 port on SiRFmarco devices.
>
> + config DEBUG_SPEAR3XX
> + bool "Kernel low-level debugging messages via ST SPEAr 3xx/6xx UART"
> + depends on ARCH_SPEAR3XX || ARCH_SPEAR6XX
> + select DEBUG_UART_PL01X
> + help
> + Say Y here if you want kernel low-level debugging support
> + on Cirrus Logic EP93xx based platforms.
> +
> + config DEBUG_SPEAR13XX
> + bool "Kernel low-level debugging messages via ST SPEAr 13xx UART"
> + depends on ARCH_SPEAR13XX
> + select DEBUG_UART_PL01X
> + help
> + Say Y here if you want kernel low-level debugging support
> + on Cirrus Logic EP93xx based platforms.
> +
> config STIH41X_DEBUG_ASC2
> bool "Use StiH415/416 ASC2 UART for low-level debug"
> depends on ARCH_STI
> @@ -860,13 +923,13 @@ choice
> Say Y here if you want kernel low-level debugging support
> on Ux500 based platforms.
>
> - config DEBUG_MT6589_UART0
> - bool "Mediatek mt6589 UART0"
> - depends on ARCH_MEDIATEK
> - select DEBUG_UART_8250
> + config DEBUG_VERSATILE
> + bool "Kernel low-level debugging messages via ARM Versatile UART"
> + depends on ARCH_VERSATILE
> + select DEBUG_UART_PL01X
> help
> Say Y here if you want kernel low-level debugging support
> - for Mediatek mt6589 based platforms on UART0.
> + on Cirrus Logic EP93xx based platforms.
>
> config DEBUG_VEXPRESS_UART0_DETECT
> bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
> @@ -1078,20 +1141,13 @@ config DEBUG_LL_INCLUDE
>
> # Compatibility options for PL01x
> config DEBUG_UART_PL01X
> - def_bool ARCH_EP93XX || \
> - ARCH_INTEGRATOR || \
> - ARCH_SPEAR3XX || \
> - ARCH_SPEAR6XX || \
> - ARCH_SPEAR13XX || \
> - ARCH_VERSATILE
> + bool
>
> # Compatibility options for 8250
> config DEBUG_UART_8250
> - def_bool ARCH_DOVE || ARCH_EBSA110 || \
> - (FOOTBRIDGE && !DEBUG_DC21285_PORT) || \
> - ARCH_GEMINI || ARCH_IOP13XX || ARCH_IOP32X || \
> - ARCH_IOP33X || ARCH_IXP4XX || \
> - ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC
> + def_bool ARCH_EBSA110 || (FOOTBRIDGE && !DEBUG_DC21285_PORT) || \
> + ARCH_IOP13XX || ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || \
> + ARCH_RPC
>
> # Compatibility options for BCM63xx
> config DEBUG_UART_BCM63XX
> @@ -1113,10 +1169,10 @@ config DEBUG_UART_PHYS
> default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT
> default 0x10124000 if DEBUG_RK3X_UART0
> default 0x10126000 if DEBUG_RK3X_UART1
> - default 0x101f1000 if ARCH_VERSATILE
> + default 0x101f1000 if DEBUG_VERSATILE
> default 0x101fb000 if DEBUG_NOMADIK_UART
> default 0x11006000 if DEBUG_MT6589_UART0
> - default 0x16000000 if ARCH_INTEGRATOR
> + default 0x16000000 if DEBUG_INTEGRATOR
> default 0x18000300 if DEBUG_BCM_5301X
> default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1
> default 0x20060000 if DEBUG_RK29_UART0
> @@ -1125,9 +1181,9 @@ config DEBUG_UART_PHYS
> default 0x20201000 if DEBUG_BCM2835
> default 0x3e000000 if DEBUG_BCM_KONA_UART
> default 0x4000e400 if DEBUG_LL_UART_EFM32
> - default 0x40090000 if ARCH_LPC32XX
> + default 0x40090000 if DEBUG_LPC32XX
> default 0x40100000 if DEBUG_PXA_UART1
> - default 0x42000000 if ARCH_GEMINI
> + default 0x42000000 if DEBUG_GEMINI
> default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
> DEBUG_S3C2410_UART0)
> default 0x50004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
> @@ -1140,24 +1196,22 @@ config DEBUG_UART_PHYS
> default 0x80070000 if DEBUG_IMX23_UART
> default 0x80074000 if DEBUG_IMX28_UART
> default 0x80230000 if DEBUG_PICOXCELL_UART
> - default 0x808c0000 if ARCH_EP93XX
> + default 0x808c0000 if DEBUG_EP93XX || ARCH_EP93XX
> default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
> default 0xa9a00000 if DEBUG_MSM_UART
> default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX
> default 0xc0013000 if DEBUG_U300_UART
> default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
> default 0xc8000003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
> - default 0xd0000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
> + default 0xd0000000 if DEBUG_SPEAR3XX
> default 0xd0012000 if DEBUG_MVEBU_UART
> default 0xc81004c0 if DEBUG_MESON_UARTAO
> default 0xd4017000 if DEBUG_MMP_UART2
> default 0xd4018000 if DEBUG_MMP_UART3
> - default 0xe0000000 if ARCH_SPEAR13XX
> default 0xe4007000 if DEBUG_HIP04_UART
> + default 0xe0000000 if DEBUG_SPEAR13XX
You'll probabably spot this in a final sweep through but this moves the
SPEAR13XX out of numeric order...
Daniel.
> default 0xf0000be0 if ARCH_EBSA110
> default 0xf1012000 if DEBUG_MVEBU_UART_ALTERNATE
> - default 0xf1012000 if ARCH_DOVE || ARCH_MV78XX0 || \
> - ARCH_ORION5X
> default 0xf7fc9000 if DEBUG_BERLIN_UART
> default 0xf8b00000 if DEBUG_HIX5HD2_UART
> default 0xf991e000 if DEBUG_QCOM_UARTDM
> @@ -1174,7 +1228,7 @@ config DEBUG_UART_PHYS
> DEBUG_LL_UART_EFM32 || \
> DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
> DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
> - DEBUG_UART_BCM63XX
> + DEBUG_UART_BCM63XX || ARCH_EP93XX
>
> config DEBUG_UART_VIRT
> hex "Virtual base address of debug UART"
> @@ -1185,14 +1239,15 @@ config DEBUG_UART_VIRT
> default 0xf0201000 if DEBUG_BCM2835
> default 0xf1000300 if DEBUG_BCM_5301X
> default 0xf1006000 if DEBUG_MT6589_UART0
> - default 0xf11f1000 if ARCH_VERSATILE
> - default 0xf1600000 if ARCH_INTEGRATOR
> + default 0xf11f1000 if DEBUG_VERSATILE
> + default 0xf1600000 if DEBUG_INTEGRATOR
> default 0xf1c28000 if DEBUG_SUNXI_UART0
> default 0xf1c28400 if DEBUG_SUNXI_UART1
> default 0xf1f02800 if DEBUG_SUNXI_R_UART
> default 0xf2100000 if DEBUG_PXA_UART1
> - default 0xf4090000 if ARCH_LPC32XX
> - default 0xf4200000 if ARCH_GEMINI
> + default 0xf31004c0 if DEBUG_MESON_UARTAO
> + default 0xf4090000 if DEBUG_LPC32XX
> + default 0xf4200000 if DEBUG_GEMINI
> default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
> DEBUG_S3C2410_UART0)
> default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
> @@ -1208,12 +1263,10 @@ config DEBUG_UART_VIRT
> default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
> default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
> default 0xfcfe8600 if DEBUG_UART_BCM63XX
> - default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
> - default 0xfd000000 if ARCH_SPEAR13XX
> - default 0xfd012000 if ARCH_MV78XX0
> - default 0xfde12000 if ARCH_DOVE
> - default 0xfe012000 if ARCH_ORION5X
> - default 0xf31004c0 if DEBUG_MESON_UARTAO
> + default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX
> + default 0xfd012000 if DEBUG_MVEBU_UART_ALTERNATE && ARCH_MV78XX0
> + default 0xfde12000 if DEBUG_MVEBU_UART_ALTERNATE && ARCH_DOVE
> + default 0xfe012000 if DEBUG_MVEBU_UART_ALTERNATE && ARCH_ORION5X
> default 0xfe017000 if DEBUG_MMP_UART2
> default 0xfe018000 if DEBUG_MMP_UART3
> default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART
> @@ -1234,7 +1287,7 @@ config DEBUG_UART_VIRT
> default 0xfed60000 if DEBUG_RK29_UART0
> default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
> default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
> - default 0xfedc0000 if ARCH_EP93XX
> + default 0xfedc0000 if DEBUG_EP93XX
> default 0xfee003f8 if FOOTBRIDGE
> default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
> default 0xfee82340 if ARCH_IOP13XX
> @@ -1269,7 +1322,7 @@ config DEBUG_UART_8250_WORD
> config DEBUG_UART_8250_FLOW_CONTROL
> bool "Enable flow control for 8250 UART"
> depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
> - default y if ARCH_EBSA110 || FOOTBRIDGE || ARCH_GEMINI || ARCH_RPC
> + default y if ARCH_EBSA110 || FOOTBRIDGE || DEBUG_GEMINI || ARCH_RPC
>
> config DEBUG_UNCOMPRESS
> bool
>
More information about the linux-arm-kernel
mailing list