[PATCH] coresight: bindings for coresight drivers
Rob Herring
robherring2 at gmail.com
Tue Nov 11 10:04:58 PST 2014
On Tue, Nov 11, 2014 at 11:46 AM, <mathieu.poirier at linaro.org> wrote:
> Greg,
>
> Please consider this as a supplement to the coresight patchset. It should have
> been sent with the rest of the patches but I missed the original ack from Rob
> Herring.
Ummm...
>
> Thanks,
> Mathieu
>
> From 69cae46640b8cdc836bf7b86211d5f2adf3d0270 Mon Sep 17 00:00:00 2001
> From: Mathieu Poirier <mathieu.poirier at linaro.org>
> Date: Thu, 7 Aug 2014 12:34:06 -0600
> Subject: [PATCH] coresight: bindings for coresight drivers
>
> Coresight IP blocks allow for the support of HW assisted tracing
> on ARM SoCs. Bindings for the currently available blocks are
> presented herein.
>
> Signed-off-by: Pratik Patel <pratikp at codeaurora.org>
> Signed-off-by: Mathieu Poirier <mathieu.poirier at linaro.org>
And you still did.
> ---
> .../devicetree/bindings/arm/coresight.txt | 204 +++++++++++++++++++++
> 1 file changed, 204 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/arm/coresight.txt
>
> diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt
> new file mode 100644
> index 0000000..d790f49
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/coresight.txt
> @@ -0,0 +1,204 @@
> +* CoreSight Components:
> +
> +CoreSight components are compliant with the ARM CoreSight architecture
> +specification and can be connected in various topologies to suit a particular
> +SoCs tracing needs. These trace components can generally be classified as
> +sinks, links and sources. Trace data produced by one or more sources flows
> +through the intermediate links connecting the source to the currently selected
> +sink. Each CoreSight component device should use these properties to describe
> +its hardware characteristcs.
> +
> +* Required properties for all components *except* non-configurable replicators:
> +
> + * compatible: These have to be supplemented with "arm,primecell" as
> + drivers are using the AMBA bus interface. Possible values include:
> + - "arm,coresight-etb10", "arm,primecell";
> + - "arm,coresight-tpiu", "arm,primecell";
> + - "arm,coresight-tmc", "arm,primecell";
> + - "arm,coresight-funnel", "arm,primecell";
> + - "arm,coresight-etm3x", "arm,primecell";
> +
> + * reg: physical base address and length of the register
> + set(s) of the component.
> +
> + * clocks: the clock associated to this component.
> +
> + * clock-names: the name of the clock as referenced by the code.
> + Since we are using the AMBA framework, the name should be
> + "apb_pclk".
> +
> + * port or ports: The representation of the component's port
> + layout using the generic DT graph presentation found in
> + "bindings/graph.txt".
> +
> +* Required properties for devices that don't show up on the AMBA bus, such as
> + non-configurable replicators:
> +
> + * compatible: Currently supported value is (note the absence of the
> + AMBA markee):
> + - "arm,coresight-replicator"
> +
> + * id: a unique number that will identify this replicator.
> +
> + * port or ports: same as above.
> +
> +* Optional properties for ETM/PTMs:
> +
> + * arm,cp14: must be present if the system accesses ETM/PTM management
> + registers via co-processor 14.
> +
> + * cpu: the cpu phandle this ETM/PTM is affined to. When omitted the
> + source is considered to belong to CPU0.
> +
> +* Optional property for TMC:
> +
> + * arm,buffer-size: size of contiguous buffer space for TMC ETR
> + (embedded trace router)
> +
> +
> +Example:
> +
> +1. Sinks
> + etb at 20010000 {
> + compatible = "arm,coresight-etb10", "arm,primecell";
> + reg = <0 0x20010000 0 0x1000>;
> +
> + coresight-default-sink;
> + clocks = <&oscclk6a>;
> + clock-names = "apb_pclk";
> + port {
> + etb_in_port: endpoint at 0 {
> + slave-mode;
> + remote-endpoint = <&replicator_out_port0>;
> + };
> + };
> + };
> +
> + tpiu at 20030000 {
> + compatible = "arm,coresight-tpiu", "arm,primecell";
> + reg = <0 0x20030000 0 0x1000>;
> +
> + clocks = <&oscclk6a>;
> + clock-names = "apb_pclk";
> + port {
> + tpiu_in_port: endpoint at 0 {
> + slave-mode;
> + remote-endpoint = <&replicator_out_port1>;
> + };
> + };
> + };
> +
> +2. Links
> + replicator {
> + /* non-configurable replicators don't show up on the
> + * AMBA bus. As such no need to add "arm,primecell".
> + */
> + compatible = "arm,coresight-replicator";
> + /* this will show up in debugfs as "0.replicator" */
> + id = <0>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* replicator output ports */
> + port at 0 {
> + reg = <0>;
> + replicator_out_port0: endpoint {
> + remote-endpoint = <&etb_in_port>;
> + };
> + };
> +
> + port at 1 {
> + reg = <1>;
> + replicator_out_port1: endpoint {
> + remote-endpoint = <&tpiu_in_port>;
> + };
> + };
> +
> + /* replicator input port */
> + port at 2 {
> + reg = <0>;
> + replicator_in_port0: endpoint {
> + slave-mode;
> + remote-endpoint = <&funnel_out_port0>;
> + };
> + };
> + };
> + };
> +
> + funnel at 20040000 {
> + compatible = "arm,coresight-funnel", "arm,primecell";
> + reg = <0 0x20040000 0 0x1000>;
> +
> + clocks = <&oscclk6a>;
> + clock-names = "apb_pclk";
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* funnel output port */
> + port at 0 {
> + reg = <0>;
> + funnel_out_port0: endpoint {
> + remote-endpoint =
> + <&replicator_in_port0>;
> + };
> + };
> +
> + /* funnel input ports */
> + port at 1 {
> + reg = <0>;
> + funnel_in_port0: endpoint {
> + slave-mode;
> + remote-endpoint = <&ptm0_out_port>;
> + };
> + };
> +
> + port at 2 {
> + reg = <1>;
> + funnel_in_port1: endpoint {
> + slave-mode;
> + remote-endpoint = <&ptm1_out_port>;
> + };
> + };
> +
> + port at 3 {
> + reg = <2>;
> + funnel_in_port2: endpoint {
> + slave-mode;
> + remote-endpoint = <&etm0_out_port>;
> + };
> + };
> +
> + };
> + };
> +
> +3. Sources
> + ptm at 2201c000 {
> + compatible = "arm,coresight-etm3x", "arm,primecell";
> + reg = <0 0x2201c000 0 0x1000>;
> +
> + cpu = <&cpu0>;
> + clocks = <&oscclk6a>;
> + clock-names = "apb_pclk";
> + port {
> + ptm0_out_port: endpoint {
> + remote-endpoint = <&funnel_in_port0>;
> + };
> + };
> + };
> +
> + ptm at 2201d000 {
> + compatible = "arm,coresight-etm3x", "arm,primecell";
> + reg = <0 0x2201d000 0 0x1000>;
> +
> + cpu = <&cpu1>;
> + clocks = <&oscclk6a>;
> + clock-names = "apb_pclk";
> + port {
> + ptm1_out_port: endpoint {
> + remote-endpoint = <&funnel_in_port1>;
> + };
> + };
> + };
> --
> 1.9.1
>
More information about the linux-arm-kernel
mailing list