[PATCH v10 0/3] ARM: rk3288: Add PM Domain support
Caesar Wang
caesar.wang at rock-chips.com
Mon Nov 10 23:19:49 PST 2014
Add power domain drivers based on generic power domain for
Rockchip platform, and support RK3288.
https://chromium-review.googlesource.com/#/c/220253/9
This is the GPU driver, add the following information in DT,
and it can support the PMDOMAIN
gpu: gpu at ffa30000 {
compatible = "arm,malit764",
"arm,malit76x",
"arm,malit7xx",
"arm,mali-midgard";
reg = <0xffa30000 0x10000>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "JOB", "MMU", "GPU";
clocks = <&cru ACLK_GPU>;
clock-names = "aclk_gpu";
operating-points = <
/* KHz uV */
100000 800000
200000 850000
300000 950000
400000 1000000
600000 1150000
>;
power-domains = <&power RK3288_PD_GPU>;
status = "disabled";
};
Based on:
- [PATCH v1 1/4] PM / clock_ops: Add pm_clk_add_clk()
http://www.mail-archive.com/linux-kernel@vger.kernel.org/msg735599.html
Changes in v10:
- this switches over domain infos to use masks instead of recomputing
them each time and also gets rid of custom domain translator and
uses standard onecell on.
- fix missing the #include <dt-bindings/power-domain/rk3288.h>
- remove the notes
Changes in v9:
- add document decription
- fix v8 changes as follows:
- This reconciles the v2 and v7 code so that we power domain have
lists of clocks they toggle on and off during power transitions and
independently from power domains clocks we attach clocks to devices
comprising power domain and prepare them so they are turn on and off
by runtime PM.
- add rockchip_pm_add_one_domain() to control domains.
- add pd_start/pd_stop interface to control clocks
- add decription for power-doamin node
Changes in v8:
- document go back to v2
- This reconciles the v2 and v7 code so that we power domain have
lists of clocks they toggle on and off during power transitions and
independently from power domains clocks we attach clocks to devices
comprising power domain and prepare them so they are turn on and off
by runtime PM.
- DTS go back to v2
Changes in v7:
- Delete unused variables
Changes in v6:
- delete pmu_lock
- modify dev_lock using mutex
- pm_clk_resume(pd->dev) change to pm_clk_resume(ed->dev)
- pm_clk_suspend(pd->dev) change to pm_clk_suspend(ed->dev)
- add devm_kfree(pd->dev, de) in rockchip_pm_domain_detach_dev
Changes in v5:
- delete idle_lock
- add timeout in rockchip_pmu_set_idle_request()
Changes in v4:
- use list storage dev
Changes in v3:
- DT structure has changed
- change use pm_clk_resume() and pm_clk_suspend()
- Decomposition power-controller, changed to multiple controller
(gpu-power-controller, hevc-power-controller)
Changes in v2:
- move clocks to "optional"
- remove the "pd->pd.of_node = np"
- make pd_vio clocks all one entry per line and alphabetize.
- power: power-controller move back to pinctrl: pinctrl.
Caesar Wang (3):
dt-bindings: add document of Rockchip power domain
power-domain: rockchip: add power doamin driver
ARM: dts: add rk3288 power-domain node
.../bindings/arm/rockchip/power_domain.txt | 48 +++
arch/arm/boot/dts/rk3288.dtsi | 66 +++
arch/arm/mach-rockchip/Kconfig | 1 +
arch/arm/mach-rockchip/Makefile | 1 +
arch/arm/mach-rockchip/pm_domains.c | 469 +++++++++++++++++++++
include/dt-bindings/power-domain/rk3288.h | 11 +
6 files changed, 596 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/rockchip/power_domain.txt
create mode 100644 arch/arm/mach-rockchip/pm_domains.c
create mode 100644 include/dt-bindings/power-domain/rk3288.h
--
1.9.1
More information about the linux-arm-kernel
mailing list