[PATCH] PCI: designware: Add support 4 ATUs assignment
Lian Minghuan-B31939
B31939 at freescale.com
Mon Nov 10 17:48:45 PST 2014
Hi Lucas,
Thanks for your comments.
Please see my reply inline.
Thanks,
Minghuan
On 2014年11月10日 20:00, Lucas Stach wrote:
> Am Montag, den 10.11.2014, 18:43 +0800 schrieb Minghuan Lian:
>> Currently, pcie-designware.c only supports two ATUs, ATU0 is used
>> for CFG0 and MEM, ATU1 is used for CFG1 and IO. There is a conflict
>> when MEM and CFG0 are accessed simultaneously. The patch adds
>> 'num-atus' property to PCIe dts node to describe the number of
>> PCIe controller's ATUs. If num_atus is bigger than or equal to 4,
>> we will change ATUs assignment: ATU0 for CFG0, ATU1 for CFG1,
>> ATU2 for MEM, ATU3 for IO.
>>
>> Signed-off-by: Minghuan Lian <Minghuan.Lian at freescale.com>
>> ---
>> .../devicetree/bindings/pci/designware-pcie.txt | 1 +
>> drivers/pci/host/pcie-designware.c | 48 ++++++++++++++++------
>> drivers/pci/host/pcie-designware.h | 5 +++
>> 3 files changed, 41 insertions(+), 13 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt
>> index 9f4faa8..500796e 100644
>> --- a/Documentation/devicetree/bindings/pci/designware-pcie.txt
>> +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt
>> @@ -26,3 +26,4 @@ Optional properties:
>> - bus-range: PCI bus numbers covered (it is recommended for new devicetrees to
>> specify this property, to keep backwards compatibility a range of 0x00-0xff
>> is assumed if not present)
>> +- num-atus: number of ATUs
> This lacks documentation for the default value if not present.
[Minghuan] I will add default value
>> diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
>> index dfed00a..b872dd0 100644
>> --- a/drivers/pci/host/pcie-designware.c
>> +++ b/drivers/pci/host/pcie-designware.c
>> @@ -48,6 +48,8 @@
>> #define PCIE_ATU_VIEWPORT 0x900
>> #define PCIE_ATU_REGION_INBOUND (0x1 << 31)
>> #define PCIE_ATU_REGION_OUTBOUND (0x0 << 31)
>> +#define PCIE_ATU_REGION_INDEX3 (0x3 << 0)
>> +#define PCIE_ATU_REGION_INDEX2 (0x2 << 0)
>> #define PCIE_ATU_REGION_INDEX1 (0x1 << 0)
>> #define PCIE_ATU_REGION_INDEX0 (0x0 << 0)
>> #define PCIE_ATU_CR1 0x904
>> @@ -346,7 +348,7 @@ int __init dw_pcie_host_init(struct pcie_port *pp)
>> struct of_pci_range range;
>> struct of_pci_range_parser parser;
>> struct resource *cfg_res;
>> - u32 val, na, ns;
>> + u32 num_atus, val, na, ns;
>> const __be32 *addrp;
>> int i, index, ret;
>>
>> @@ -486,6 +488,18 @@ int __init dw_pcie_host_init(struct pcie_port *pp)
>> }
>> }
>>
>> + if (of_property_read_u32(np, "num-atus", &num_atus))
>> + num_atus = 2;
> You don't need this check. Just initialize num_atus to 2,
> of_property_read_u32() won't touch the value if the property isn't
> found.
[Minghuan] Ok, I will change it.
>> + if (num_atus >= 4) {
>> + pp->atu_cfg0_idx = PCIE_ATU_REGION_INDEX0;
>> + pp->atu_cfg1_idx = PCIE_ATU_REGION_INDEX1;
>> + pp->atu_mem_idx = PCIE_ATU_REGION_INDEX2;
>> + pp->atu_io_idx = PCIE_ATU_REGION_INDEX3;
>> + } else {
>> + pp->atu_cfg0_idx = pp->atu_mem_idx = PCIE_ATU_REGION_INDEX0;
>> + pp->atu_cfg1_idx = pp->atu_io_idx = PCIE_ATU_REGION_INDEX1;
>> + }
>> +
>> if (pp->ops->host_init)
>> pp->ops->host_init(pp);
>>
>> @@ -511,8 +525,8 @@ int __init dw_pcie_host_init(struct pcie_port *pp)
>>
>> static void dw_pcie_prog_viewport_cfg0(struct pcie_port *pp, u32 busdev)
>> {
>> - /* Program viewport 0 : OUTBOUND : CFG0 */
>> - dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0,
>> + /* Program viewport : OUTBOUND : CFG0 */
>> + dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | pp->atu_cfg0_idx,
>> PCIE_ATU_VIEWPORT);
>> dw_pcie_writel_rc(pp, pp->cfg0_mod_base, PCIE_ATU_LOWER_BASE);
>> dw_pcie_writel_rc(pp, (pp->cfg0_mod_base >> 32), PCIE_ATU_UPPER_BASE);
>> @@ -526,8 +540,8 @@ static void dw_pcie_prog_viewport_cfg0(struct pcie_port *pp, u32 busdev)
>>
>> static void dw_pcie_prog_viewport_cfg1(struct pcie_port *pp, u32 busdev)
>> {
>> - /* Program viewport 1 : OUTBOUND : CFG1 */
>> - dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1,
>> + /* Program viewport : OUTBOUND : CFG1 */
>> + dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | pp->atu_cfg1_idx,
>> PCIE_ATU_VIEWPORT);
>> dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_CFG1, PCIE_ATU_CR1);
>> dw_pcie_writel_rc(pp, pp->cfg1_mod_base, PCIE_ATU_LOWER_BASE);
>> @@ -541,8 +555,8 @@ static void dw_pcie_prog_viewport_cfg1(struct pcie_port *pp, u32 busdev)
>>
>> static void dw_pcie_prog_viewport_mem_outbound(struct pcie_port *pp)
>> {
>> - /* Program viewport 0 : OUTBOUND : MEM */
>> - dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0,
>> + /* Program viewport : OUTBOUND : MEM */
>> + dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | pp->atu_mem_idx,
>> PCIE_ATU_VIEWPORT);
>> dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_MEM, PCIE_ATU_CR1);
>> dw_pcie_writel_rc(pp, pp->mem_mod_base, PCIE_ATU_LOWER_BASE);
>> @@ -557,8 +571,8 @@ static void dw_pcie_prog_viewport_mem_outbound(struct pcie_port *pp)
>>
>> static void dw_pcie_prog_viewport_io_outbound(struct pcie_port *pp)
>> {
>> - /* Program viewport 1 : OUTBOUND : IO */
>> - dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1,
>> + /* Program viewport : OUTBOUND : IO */
>> + dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | pp->atu_io_idx,
>> PCIE_ATU_VIEWPORT);
>> dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_IO, PCIE_ATU_CR1);
>> dw_pcie_writel_rc(pp, pp->io_mod_base, PCIE_ATU_LOWER_BASE);
>> @@ -585,12 +599,14 @@ static int dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus,
>> dw_pcie_prog_viewport_cfg0(pp, busdev);
>> ret = dw_pcie_cfg_read(pp->va_cfg0_base + address, where, size,
>> val);
>> - dw_pcie_prog_viewport_mem_outbound(pp);
>> + if (pp->atu_mem_idx == pp->atu_cfg0_idx)
>> + dw_pcie_prog_viewport_mem_outbound(pp);
>> } else {
>> dw_pcie_prog_viewport_cfg1(pp, busdev);
>> ret = dw_pcie_cfg_read(pp->va_cfg1_base + address, where, size,
>> val);
>> - dw_pcie_prog_viewport_io_outbound(pp);
>> + if (pp->atu_io_idx == pp->atu_cfg1_idx)
>> + dw_pcie_prog_viewport_io_outbound(pp);
>> }
>>
>> return ret;
>> @@ -610,12 +626,14 @@ static int dw_pcie_wr_other_conf(struct pcie_port *pp, struct pci_bus *bus,
>> dw_pcie_prog_viewport_cfg0(pp, busdev);
>> ret = dw_pcie_cfg_write(pp->va_cfg0_base + address, where, size,
>> val);
>> - dw_pcie_prog_viewport_mem_outbound(pp);
>> + if (pp->atu_mem_idx == pp->atu_cfg0_idx)
>> + dw_pcie_prog_viewport_mem_outbound(pp);
>> } else {
>> dw_pcie_prog_viewport_cfg1(pp, busdev);
>> ret = dw_pcie_cfg_write(pp->va_cfg1_base + address, where, size,
>> val);
>> - dw_pcie_prog_viewport_io_outbound(pp);
>> + if (pp->atu_io_idx == pp->atu_cfg1_idx)
>> + dw_pcie_prog_viewport_io_outbound(pp);
>> }
>>
>> return ret;
>> @@ -770,6 +788,10 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
>> u32 membase;
>> u32 memlimit;
>>
>> + /* set ATUs setting for MEM and IO */
>> + dw_pcie_prog_viewport_mem_outbound(pp);
>> + dw_pcie_prog_viewport_io_outbound(pp);
>> +
>> /* set the number of lanes */
>> dw_pcie_readl_rc(pp, PCIE_PORT_LINK_CONTROL, &val);
>> val &= ~PORT_LINK_MODE_MASK;
>> diff --git a/drivers/pci/host/pcie-designware.h b/drivers/pci/host/pcie-designware.h
>> index c625675..404f601 100644
>> --- a/drivers/pci/host/pcie-designware.h
>> +++ b/drivers/pci/host/pcie-designware.h
>> @@ -53,6 +53,11 @@ struct pcie_port {
>> struct irq_domain *irq_domain;
>> unsigned long msi_data;
>> DECLARE_BITMAP(msi_irq_in_use, MAX_MSI_IRQS);
>> + /* ATUs setting */
>> + u8 atu_cfg0_idx;
>> + u8 atu_cfg1_idx;
>> + u8 atu_mem_idx;
>> + u8 atu_io_idx;
> I don't like those single values. Can we please make this an array
> indexed by a proper enum? Like this:
>
> enum ATU_TYPE {
> ATU_TYPE_CFG0 = 0,
> ATU_TYPE_CFG1 = 1,
> ATU_TYPE_MEM = 2,
> ATU_TYPE_IO = 3,
> ATU_TYPE_MAX
> }
>
> u8 atu_idx[ATU_TYPE_MAX];
[Minghuan] Great. it's better to use array.
More information about the linux-arm-kernel
mailing list