[PATCHv4 2/5] arm: socfpga: Enable OCRAM ECC on startup.

Thor Thayer tthayer at opensource.altera.com
Fri Nov 7 14:11:27 PST 2014


Hi Dinh,

On 11/07/2014 02:32 PM, Dinh Nguyen wrote:
> Hi Thor,
>
> On 11/07/2014 10:54 AM, tthayer at opensource.altera.com wrote:
>> From: Thor Thayer <tthayer at opensource.altera.com>
>>
>> This patch enables the ECC for On-Chip RAM on machine
>> startup.  The ECC has to be enabled before data is
>> is stored in memory otherwise the ECC will fail on
>> reads.
>>
>> Signed-off-by: Thor Thayer <tthayer at opensource.altera.com>
>> ---
>> v2: Split OCRAM ECC portion separately. Addition of iounmap()
>> and reorganization of gen_pool_free. Remove defconfig from patch.
>>
>> v3/4: No change
>> ---
>>   MAINTAINERS                     |    1 +
>>   arch/arm/mach-socfpga/Makefile  |    1 +
>>   arch/arm/mach-socfpga/ocram.c   |   90 +++++++++++++++++++++++++++++++++++++++
>>   arch/arm/mach-socfpga/ocram.h   |   28 ++++++++++++
>>   arch/arm/mach-socfpga/socfpga.c |    8 ++++
>>   5 files changed, 128 insertions(+)
>>   create mode 100644 arch/arm/mach-socfpga/ocram.c
>>   create mode 100644 arch/arm/mach-socfpga/ocram.h
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index d0c7752..c6d390e 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -1408,6 +1408,7 @@ M:	Thor Thayer <tthayer at opensource.altera.com>
>>   S:	Maintained
>>   F:	drivers/edac/altera_edac.
>>   F:	arch/arm/mach-socfpga/l2_cache.*
>> +F:	arch/arm/mach-socfpga/ocram.*
> I think you can remove these entries for l2_cache.c and ocram.c since it
> already falls under mach-socfpga/, which I already maintain.

Thanks. I will remove them.
>>   
>>   ARM/STI ARCHITECTURE
>>   M:	Srinivas Kandagatla <srinivas.kandagatla at gmail.com>
>> diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile
>> index 142609e..1552ca5 100644
>> --- a/arch/arm/mach-socfpga/Makefile
>> +++ b/arch/arm/mach-socfpga/Makefile
>> @@ -5,3 +5,4 @@
>>   obj-y					:= socfpga.o
>>   obj-$(CONFIG_SMP)	+= headsmp.o platsmp.o
>>   obj-$(CONFIG_EDAC_ALTERA_L2C) += l2_cache.o
>> +obj-$(CONFIG_EDAC_ALTERA_OCRAM) += ocram.o
>> diff --git a/arch/arm/mach-socfpga/ocram.c b/arch/arm/mach-socfpga/ocram.c
>> new file mode 100644
>> index 0000000..9136009
>> --- /dev/null
>> +++ b/arch/arm/mach-socfpga/ocram.c
>> @@ -0,0 +1,90 @@
>> +/*
>> + * Copyright Altera Corporation (C) 2014. All rights reserved.
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms and conditions of the GNU General Public License,
>> + * version 2, as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope it will be useful, but WITHOUT
>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
>> + * more details.
>> + *
>> + * You should have received a copy of the GNU General Public License along with
>> + * this program.  If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +#include <linux/clk-provider.h>
> Why clk-provider.h and not io.h?

I will change to io.h.
>> +#include <linux/genalloc.h>
>> +#include <linux/of_platform.h>
>> +
>> +#include "ocram.h"
>> +
>> +void socfpga_init_ocram_ecc(void)
>> +{
>> +	struct device_node *np;
>> +	const __be32 *prop;
>> +	u32 ocr_edac_addr, iram_addr, len;
>> +	void __iomem  *mapped_ocr_edac_addr;
>> +	size_t size;
>> +	struct gen_pool *gp;
>> +
>> +	np = of_find_compatible_node(NULL, NULL, "altr,ocram-edac");
>> +	if (!np) {
>> +		pr_err("SOCFPGA: Unable to find altr,ocram-edac in dtb\n");
>> +		return;
>> +	}
>> +
>> +	prop = of_get_property(np, "reg", &size);
>> +	ocr_edac_addr = be32_to_cpup(prop++);
>> +	len = be32_to_cpup(prop);
> You should be checking for prop before calling be32_to_cpup.
>
>> +	if (!prop || size < sizeof(*prop)) {
> Then you don't need check for prop here.
>
>> +		pr_err("SOCFPGA: Unable to find OCRAM ECC mapping in dtb\n");
>> +		return;
>> +	}
>> +
>> +	gp = of_get_named_gen_pool(np, "iram", 0);
>> +	if (!gp) {
>> +		pr_err("SOCFPGA: OCRAM cannot find gen pool\n");
>> +		return;
>> +	}
>> +
>> +	np = of_find_compatible_node(NULL, NULL, "mmio-sram");
>> +	if (!np) {
>> +		pr_err("SOCFPGA: Unable to find mmio-sram in dtb\n");
>> +		return;
>> +	}
>> +	/* Determine the OCRAM address and size */
>> +	prop = of_get_property(np, "reg", &size);
>> +	iram_addr = be32_to_cpup(prop++);
>> +	len = be32_to_cpup(prop);
> Same comment here for checking prop before calling be32_to_cpu.

Good catch. Thanks.
>> +
>> +	if (!prop || size < sizeof(*prop)) {
>> +		pr_err("SOCFPGA: Unable to find OCRAM mapping in dtb\n");
>> +		return;
>> +	}
>> +
>> +	iram_addr = gen_pool_alloc(gp, len);
>> +	if (iram_addr == 0) {
>> +		pr_err("SOCFPGA: cannot alloc from gen pool\n");
>> +		return;
>> +	}
>> +
>> +	memset((void *)iram_addr, 0, len);
>> +
>> +	gen_pool_free(gp, iram_addr, len);
>> +
>> +	mapped_ocr_edac_addr = ioremap(ocr_edac_addr, 4);
>> +	if (!mapped_ocr_edac_addr) {
>> +		pr_err("SOCFPGA: Unable to map OCRAM ecc regs.\n");
>> +		return;
>> +	}
>> +
>> +	/* Clear any pending OCRAM ECC interrupts, then enable ECC */
>> +	writel(0x18, mapped_ocr_edac_addr);
>> +	writel(0x19, mapped_ocr_edac_addr);
> Can you add a define for 0x18 and 0x19? What do these values mean?

Sure.
>> +
>> +	iounmap(mapped_ocr_edac_addr);
>> +
>> +	pr_debug("SOCFPGA: Success Initializing OCRAM\n");
>> +}
>> +
>> diff --git a/arch/arm/mach-socfpga/ocram.h b/arch/arm/mach-socfpga/ocram.h
>> new file mode 100644
>> index 0000000..f93cf84
>> --- /dev/null
>> +++ b/arch/arm/mach-socfpga/ocram.h
>> @@ -0,0 +1,28 @@
>> +/*
>> + * Copyright Altera Corporation (C) 2014. All rights reserved.
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms and conditions of the GNU General Public License,
>> + * version 2, as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope it will be useful, but WITHOUT
>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
>> + * more details.
>> + *
>> + * You should have received a copy of the GNU General Public License along with
>> + * this program.  If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +
>> +#ifndef MACH_SOCFPGA_OCRAM_H
>> +#define MACH_SOCFPGA_OCRAM_H
>> +
>> +#ifdef CONFIG_EDAC_ALTERA_OCRAM
>> +void socfpga_init_ocram_ecc(void);
>> +#else
>> +inline void socfpga_init_ocram_ecc(void)
>> +{
>> +}
>> +#endif
>> +
>> +#endif /* #ifndef MACH_SOCFPGA_OCRAM_H */
>> diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c
>> index af6413a..fb41aca 100644
>> --- a/arch/arm/mach-socfpga/socfpga.c
>> +++ b/arch/arm/mach-socfpga/socfpga.c
>> @@ -101,6 +101,13 @@ static void socfpga_cyclone5_restart(enum reboot_mode mode, const char *cmd)
>>   	writel(temp, rst_manager_base_addr + SOCFPGA_RSTMGR_CTRL);
>>   }
>>   
>> +static void __init socfpga_cyclone5_init(void)
>> +{
>> +	of_platform_populate(NULL, of_default_bus_match_table,
>> +			     NULL, NULL);
>> +	socfpga_init_ocram_ecc();
> Use IS_ENABLED() here, so you can remove the need to have ocram.h. You
> can put the function declaration in core.h.
>
> Dinh

I will make the changes. Thanks!
>
>> +}
>> +
>>   static const char *altera_dt_match[] = {
>>   	"altr,socfpga",
>>   	NULL
>> @@ -112,6 +119,7 @@ DT_MACHINE_START(SOCFPGA, "Altera SOCFPGA")
>>   	.smp		= smp_ops(socfpga_smp_ops),
>>   	.map_io		= socfpga_map_io,
>>   	.init_irq	= socfpga_init_irq,
>> +	.init_machine	= socfpga_cyclone5_init,
>>   	.restart	= socfpga_cyclone5_restart,
>>   	.dt_compat	= altera_dt_match,
>>   MACHINE_END
>>




More information about the linux-arm-kernel mailing list