[PATCH 5/5] serial: pl011: Add device tree support for RX DMA polling

[Andrew Jackson]

Add equivalent attributes to those provided in the platform data
for use when RX DMA is enabled.

Signed-off-by: Andrew Jackson <Andrew.Jackson at arm.com>
---
 Documentation/devicetree/bindings/serial/pl011.txt |   19 ++++++++++------
 drivers/tty/serial/amba-pl011.c                    |   22 +++++++++++++++++--
 2 files changed, 31 insertions(+), 10 deletions(-)

diff --git a/Documentation/devicetree/bindings/serial/pl011.txt b/Documentation/devicetree/bindings/serial/pl011.txt
index 5d2e840..0e05340 100644
--- a/Documentation/devicetree/bindings/serial/pl011.txt
+++ b/Documentation/devicetree/bindings/serial/pl011.txt
@@ -6,12 +6,17 @@ Required properties:
 - interrupts: exactly one interrupt specifier
 
 Optional properties:
-- pinctrl: When present, must have one state named "sleep"
-	   and one state named "default"
-- clocks:  When present, must refer to exactly one clock named
-	   "apb_pclk"
-- dmas:	   When present, may have one or two dma channels.
-	   The first one must be named "rx", the second one
-	   must be named "tx".
+- pinctrl:		When present, must have one state named "sleep"
+			and one state named "default"
+- clocks:		When present, must refer to exactly one clock named
+			"apb_pclk"
+- dmas:			When present, may have one or two dma channels.
+			The first one must be named "rx", the second one
+			must be named "tx".
+- auto-poll:		Enables polling when using RX DMA.
+- poll-rate-ms:		Rate at which poll occurs when auto-poll is set,
+			default 100ms.
+- poll-timeout-ms:	Poll timeout when auto-poll is set, default
+			3000ms.
 
 See also bindings/arm/primecell.txt
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 79b9c93..767711b 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -341,6 +341,7 @@ static void pl011_dma_probe_initcall(struct device *dev, struct uart_amba_port *
 		dmaengine_slave_config(chan, &rx_conf);
 		uap->dmarx.chan = chan;
 
+		uap->dmarx.auto_poll_rate = false;
 		if (plat && plat->dma_rx_poll_enable) {
 			/* Set poll rate if specified. */
 			if (plat->dma_rx_poll_rate) {
@@ -361,9 +362,24 @@ static void pl011_dma_probe_initcall(struct device *dev, struct uart_amba_port *
 					plat->dma_rx_poll_timeout;
 			else
 				uap->dmarx.poll_timeout = 3000;
-		} else
-			uap->dmarx.auto_poll_rate = false;
-
+		} else if (!plat && dev->of_node) {
+			uap->dmarx.auto_poll_rate = of_property_read_bool(
+						dev->of_node, "auto-poll");
+			if (uap->dmarx.auto_poll_rate) {
+				u32 x;
+
+				if (0 == of_property_read_u32(dev->of_node,
+						"poll-rate-ms", &x))
+					uap->dmarx.poll_rate = x;
+				else
+					uap->dmarx.poll_rate = 100;
+				if (0 == of_property_read_u32(dev->of_node,
+						"poll-timeout-ms", &x))
+					uap->dmarx.poll_timeout = x;
+				else
+					uap->dmarx.poll_timeout = 3000;
+			}
+		}
 		dev_info(uap->port.dev, "DMA channel RX %s\n",
 			 dma_chan_name(uap->dmarx.chan));
 	}
-- 
1.7.1