[PATCH] leds: leds-gpio: Fix legacy GPIO number case

[Rafael J. Wysocki]

On 11/6/2014 12:23 PM, Geert Uytterhoeven wrote:
> In the legacy case, led_dat->gpiod is initialized correctly, but
> overwritten later by template->gpiod, which is NULL, causing leds-gpio
> to fail with:
>
>      gpiod_direction_output: invalid GPIO
>      leds-gpio: probe of leds-gpio failed with error -22
>
> Move the initialization of led_dat->gpiod from template->gpiod up, and
> always use led_dat->gpiod later, to fix this.
>
> Fixes: 5c51277a9ababfa4 ("leds: leds-gpio: Add support for GPIO descriptors")
> Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>

Since it fixes a bug in a patch going from my tree, the fix needs to go 
into my tree as well.
Thus I'm going to take into my device-properties branch.

Bryan, please let me know if there are any problems with that.

Rafael


> ---
>   drivers/leds/leds-gpio.c | 6 +++---
>   1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
> index ba4698c32bb04bde..b3c5d9d6a42bcd8b 100644
> --- a/drivers/leds/leds-gpio.c
> +++ b/drivers/leds/leds-gpio.c
> @@ -92,7 +92,8 @@ static int create_gpio_led(const struct gpio_led *template,
>   {
>   	int ret, state;
>   
> -	if (!template->gpiod) {
> +	led_dat->gpiod = template->gpiod;
> +	if (!led_dat->gpiod) {
>   		/*
>   		 * This is the legacy code path for platform code that
>   		 * still uses GPIO numbers. Ultimately we would like to get
> @@ -122,8 +123,7 @@ static int create_gpio_led(const struct gpio_led *template,
>   
>   	led_dat->cdev.name = template->name;
>   	led_dat->cdev.default_trigger = template->default_trigger;
> -	led_dat->gpiod = template->gpiod;
> -	led_dat->can_sleep = gpiod_cansleep(template->gpiod);
> +	led_dat->can_sleep = gpiod_cansleep(led_dat->gpiod);
>   	led_dat->blinking = 0;
>   	if (blink_set) {
>   		led_dat->platform_gpio_blink_set = blink_set;