[PATCH V3 2/3] can: m_can: update to support CAN FD features

[Oliver Hartkopp]

Looks good to me now.

Thanks for your patience.

Acked-by: Oliver Hartkopp <socketcan at hartkopp.net>

On 05.11.2014 15:31, Marc Kleine-Budde wrote:
> On 11/05/2014 02:16 PM, Dong Aisheng wrote:
>> Bosch M_CAN is CAN FD capable device. This patch implements the CAN
>> FD features include up to 64 bytes payload and bitrate switch function.
>> 1) Change the Rx FIFO and Tx Buffer to 64 bytes for support CAN FD
>>     up to 64 bytes payload. It's backward compatible with old 8 bytes
>>     normal CAN frame.
>> 2) Allocate can frame or canfd frame based on EDL bit
>> 3) Bitrate Switch function is disabled by default and will be enabled
>>     according to CANFD_BRS bit in cf->flags.
>>
>> Signed-off-by: Dong Aisheng <b29396 at freescale.com>
>
> I'm waiting on Oliver's Ack on this patch, then I'll apply 1+2.
>
> regards,
> Marc
>