[PATCH] ARM: dts: vf610: add SD node to cosmic dts

[Olof Johansson]

Driver has been there since a while back, but the dts never seems to
have been updated with the node (nor pinctrl). Do so now.

Cc: Matt Porter <mporter at linaro.org>
Signed-off-by: Olof Johansson <olof at lixom.net>
---

Shawn, Stefan: This probably has some small conflicts with Stefan's
patchsets that refactors some of the dts contents for 3.19. I'd like to
pick this patch up as a fix for 3.18 though, since it makes my Cosmic+
board usable for the boot farm.

If that'd be OK (i.e. to apply Stefan's patches on top of this), please
ack so I can include it with the next set of fixes. :)

Thanks,

-Olof

 arch/arm/boot/dts/vf610-cosmic.dts |   20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm/boot/dts/vf610-cosmic.dts b/arch/arm/boot/dts/vf610-cosmic.dts
index 3fd1b74..c1b8355 100644
--- a/arch/arm/boot/dts/vf610-cosmic.dts
+++ b/arch/arm/boot/dts/vf610-cosmic.dts
@@ -56,6 +56,19 @@
 			>;
 		};
 
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
+				VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
+				VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
+				VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
+				VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
+				VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
+				VF610_PAD_PTB28__GPIO_98	0x219d
+			>;
+		};
+
+
 		pinctrl_uart1: uart1grp {
 			fsl,pins = <
 				VF610_PAD_PTB4__UART1_TX		0x21a2
@@ -70,3 +83,10 @@
 	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
 };
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	status = "okay";
+};
-- 
1.7.10.4