[PATCH 2/4] Documentation: DT: Add documentation for ti, opa362 bindings

[Marek Belisko]

Signed-off-by: Marek Belisko <marek at goldelico.com>
---
 .../devicetree/bindings/video/ti,opa362.txt        | 38 ++++++++++++++++++++++
 1 file changed, 38 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/video/ti,opa362.txt

diff --git a/Documentation/devicetree/bindings/video/ti,opa362.txt b/Documentation/devicetree/bindings/video/ti,opa362.txt
new file mode 100644
index 0000000..d7ed11a
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/ti,opa362.txt
@@ -0,0 +1,38 @@
+OPA362 analog video amplifier
+
+Required properties:
+- compatible: "ti,opa362"
+- gpio: enable/disable output gpio
+
+Required node:
+- Video port 0 for opa362 input
+- Video port 1 for opa362 output
+
+Example:
+
+tv_amp: opa362 {
+	 compatible = "ti,opa362";
+	 gpios = <&gpio1 23 0>;  /* GPIO to enable video out amplifier */
+	 
+	label = "opa362";
+	 ports {
+		 #address-cells = <1>;
+		 #size-cells = <0>;
+		 port at 0 {
+			 reg = <0>;
+			 opa_in: endpoint at 0 {
+				 remote-endpoint = <&venc_out>;
+			 };
+		 };
+
+		 port at 1 {
+			 reg = <1>;
+			 opa_out: endpoint at 0 {
+				 remote-endpoint = <&tv_connector_in>;
+			 };
+		 };
+	 };
+ };
+
+
+
-- 
1.9.1