[PATCH v4 8/9] ARM: shmobile: r8a7740 dtsi: Add PM domain support
Mathieu Poirier
mathieu.poirier at linaro.org
Mon Nov 3 13:24:46 PST 2014
On 3 November 2014 08:34, Geert Uytterhoeven <geert+renesas at glider.be> wrote:
> Add a device node for the System Controller, with subnodes that
> represent the hardware power area hierarchy.
> Hook up all devices to their respective PM domains.
>
> Add a minimal device node for the Coresight-ETM hardware block, and hook
> it up to the D4 PM domain, so the R-Mobile System Controller driver can
> keep the domain powered, until the new Coresight code handles runtime
> PM.
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
> ---
> v4:
> - Remove power-domains properties from clocks, as these will not be
> instantiated as platform devices,
> - Fix indentation of power-domains property in pfc node,
> - Add minimal node for Coresight-ETM,
> - Add power-domains properties to the recently added TMU nodes,
> v3:
> - Move power-on/off latencies to a separate patch,
> - Add dependencies,
> v2:
> - Insert power-domains property after clock-names property in the cmt1
> node.
> ---
> arch/arm/boot/dts/r8a7740.dtsi | 99 ++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 99 insertions(+)
>
> diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
> index aec8da89ef9ac766..20d2b56773fbf069 100644
> --- a/arch/arm/boot/dts/r8a7740.dtsi
> +++ b/arch/arm/boot/dts/r8a7740.dtsi
> @@ -25,6 +25,7 @@
> device_type = "cpu";
> reg = <0x0>;
> clock-frequency = <800000000>;
> + power-domains = <&pd_a3sm>;
Perfect - I'm taking the same approach on TC2 for coresight. That way
the system doesn't crash when accessing the coresight registers of an
ETM/PTM belonging to a CPU in a powered down cluster.
> };
> };
>
> @@ -41,12 +42,18 @@
> interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> + ptm {
> + compatible = "arm,coresight-etm3x";
> + power-domains = <&pd_d4>;
> + };
> +
> cmt1: timer at e6138000 {
> compatible = "renesas,cmt-48-r8a7740", "renesas,cmt-48";
> reg = <0xe6138000 0x170>;
> interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&mstp3_clks R8A7740_CLK_CMT1>;
> clock-names = "fck";
> + power-domains = <&pd_c5>;
>
> renesas,channels-mask = <0x3f>;
>
> @@ -72,6 +79,7 @@
> 0 149 IRQ_TYPE_LEVEL_HIGH
> 0 149 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
> + power-domains = <&pd_a4s>;
> };
>
> /* irqpin1: IRQ8 - IRQ15 */
> @@ -93,6 +101,7 @@
> 0 149 IRQ_TYPE_LEVEL_HIGH
> 0 149 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
> + power-domains = <&pd_a4s>;
> };
>
> /* irqpin2: IRQ16 - IRQ23 */
> @@ -114,6 +123,7 @@
> 0 149 IRQ_TYPE_LEVEL_HIGH
> 0 149 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
> + power-domains = <&pd_a4s>;
> };
>
> /* irqpin3: IRQ24 - IRQ31 */
> @@ -135,6 +145,7 @@
> 0 149 IRQ_TYPE_LEVEL_HIGH
> 0 149 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
> + power-domains = <&pd_a4s>;
> };
>
> ether: ethernet at e9a00000 {
> @@ -143,6 +154,7 @@
> <0xe9a01800 0x800>;
> interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&mstp3_clks R8A7740_CLK_GETHER>;
> + power-domains = <&pd_a4s>;
> phy-mode = "mii";
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -159,6 +171,7 @@
> 0 203 IRQ_TYPE_LEVEL_HIGH
> 0 204 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&mstp1_clks R8A7740_CLK_IIC0>;
> + power-domains = <&pd_a4r>;
> status = "disabled";
> };
>
> @@ -172,6 +185,7 @@
> 0 72 IRQ_TYPE_LEVEL_HIGH
> 0 73 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&mstp3_clks R8A7740_CLK_IIC1>;
> + power-domains = <&pd_a3sp>;
> status = "disabled";
> };
>
> @@ -181,6 +195,7 @@
> interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&mstp2_clks R8A7740_CLK_SCIFA0>;
> clock-names = "sci_ick";
> + power-domains = <&pd_a3sp>;
> status = "disabled";
> };
>
> @@ -190,6 +205,7 @@
> interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&mstp2_clks R8A7740_CLK_SCIFA1>;
> clock-names = "sci_ick";
> + power-domains = <&pd_a3sp>;
> status = "disabled";
> };
>
> @@ -199,6 +215,7 @@
> interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&mstp2_clks R8A7740_CLK_SCIFA2>;
> clock-names = "sci_ick";
> + power-domains = <&pd_a3sp>;
> status = "disabled";
> };
>
> @@ -208,6 +225,7 @@
> interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&mstp2_clks R8A7740_CLK_SCIFA3>;
> clock-names = "sci_ick";
> + power-domains = <&pd_a3sp>;
> status = "disabled";
> };
>
> @@ -217,6 +235,7 @@
> interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&mstp2_clks R8A7740_CLK_SCIFA4>;
> clock-names = "sci_ick";
> + power-domains = <&pd_a3sp>;
> status = "disabled";
> };
>
> @@ -226,6 +245,7 @@
> interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&mstp2_clks R8A7740_CLK_SCIFA5>;
> clock-names = "sci_ick";
> + power-domains = <&pd_a3sp>;
> status = "disabled";
> };
>
> @@ -235,6 +255,7 @@
> interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&mstp2_clks R8A7740_CLK_SCIFA6>;
> clock-names = "sci_ick";
> + power-domains = <&pd_a3sp>;
> status = "disabled";
> };
>
> @@ -244,6 +265,7 @@
> interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&mstp2_clks R8A7740_CLK_SCIFA7>;
> clock-names = "sci_ick";
> + power-domains = <&pd_a3sp>;
> status = "disabled";
> };
>
> @@ -253,6 +275,7 @@
> interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&mstp2_clks R8A7740_CLK_SCIFB>;
> clock-names = "sci_ick";
> + power-domains = <&pd_a3sp>;
> status = "disabled";
> };
>
> @@ -271,12 +294,14 @@
> <&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>,
> <&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>,
> <&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>;
> + power-domains = <&pd_c5>;
> };
>
> tpu: pwm at e6600000 {
> compatible = "renesas,tpu-r8a7740", "renesas,tpu";
> reg = <0xe6600000 0x100>;
> clocks = <&mstp3_clks R8A7740_CLK_TPU0>;
> + power-domains = <&pd_a3sp>;
> status = "disabled";
> #pwm-cells = <3>;
> };
> @@ -287,6 +312,7 @@
> interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH
> 0 57 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&mstp3_clks R8A7740_CLK_MMC>;
> + power-domains = <&pd_a3sp>;
> status = "disabled";
> };
>
> @@ -297,6 +323,7 @@
> 0 118 IRQ_TYPE_LEVEL_HIGH
> 0 119 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&mstp3_clks R8A7740_CLK_SDHI0>;
> + power-domains = <&pd_a3sp>;
> cap-sd-highspeed;
> cap-sdio-irq;
> status = "disabled";
> @@ -309,6 +336,7 @@
> 0 122 IRQ_TYPE_LEVEL_HIGH
> 0 123 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&mstp3_clks R8A7740_CLK_SDHI1>;
> + power-domains = <&pd_a3sp>;
> cap-sd-highspeed;
> cap-sdio-irq;
> status = "disabled";
> @@ -321,6 +349,7 @@
> 0 126 IRQ_TYPE_LEVEL_HIGH
> 0 127 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&mstp4_clks R8A7740_CLK_SDHI2>;
> + power-domains = <&pd_a3sp>;
> cap-sd-highspeed;
> cap-sdio-irq;
> status = "disabled";
> @@ -332,6 +361,7 @@
> reg = <0xfe1f0000 0x400>;
> interrupts = <0 9 0x4>;
> clocks = <&mstp3_clks R8A7740_CLK_FSI>;
> + power-domains = <&pd_a4mp>;
> status = "disabled";
> };
>
> @@ -343,6 +373,7 @@
> <0 200 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&mstp1_clks R8A7740_CLK_TMU0>;
> clock-names = "fck";
> + power-domains = <&pd_a4r>;
>
> #renesas,channels = <3>;
>
> @@ -357,6 +388,7 @@
> <0 172 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&mstp1_clks R8A7740_CLK_TMU1>;
> clock-names = "fck";
> + power-domains = <&pd_a4r>;
>
> #renesas,channels = <3>;
>
> @@ -543,4 +575,71 @@
> "usbhost", "sdhi2", "usbfunc", "usphy";
> };
> };
> +
> + sysc: system-controller at e6180000 {
> + compatible = "renesas,sysc-r8a7740", "renesas,sysc-rmobile";
> + reg = <0xe6180000 8000>, <0xe6188000 8000>;
> +
> + pm-domains {
> + pd_c5: c5 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #power-domain-cells = <0>;
> +
> + pd_a4lc: a4lc at 1 {
> + reg = <1>;
> + #power-domain-cells = <0>;
> + };
> +
> + pd_a4mp: a4mp at 2 {
> + reg = <2>;
> + #power-domain-cells = <0>;
> + };
> +
> + pd_d4: d4 at 3 {
> + reg = <3>;
> + #power-domain-cells = <0>;
> + };
> +
> + pd_a4r: a4r at 5 {
> + reg = <5>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #power-domain-cells = <0>;
> +
> + pd_a3rv: a3rv at 6 {
> + reg = <6>;
> + #power-domain-cells = <0>;
> + };
> + };
> +
> + pd_a4s: a4s at 10 {
> + reg = <10>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #power-domain-cells = <0>;
> +
> + pd_a3sp: a3sp at 11 {
> + reg = <11>;
> + #power-domain-cells = <0>;
> + };
> +
> + pd_a3sm: a3sm at 12 {
> + reg = <12>;
> + #power-domain-cells = <0>;
> + };
> +
> + pd_a3sg: a3sg at 13 {
> + reg = <13>;
> + #power-domain-cells = <0>;
> + };
> + };
> +
> + pd_a4su: a4su at 20 {
> + reg = <20>;
> + #power-domain-cells = <0>;
> + };
> + };
> + };
> + };
> };
> --
> 1.9.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
More information about the linux-arm-kernel
mailing list