[PATCH 5/7] can: clear ctrlmode when close candev

[Marc Kleine-Budde]

On 10/29/2014 11:45 AM, Dong Aisheng wrote:
> Currently priv->ctrlmode is not cleared when close_candev, so next time
> the driver will still use this value to set controller even user
> does not set any ctrl mode.
> e.g.
> Step 1. ip link set can0 up type can0 bitrate 1000000 loopback on
> Controller will be in loopback mode
> Step 2. ip link set can0 down
> Step 3. ip link set can0 up type can0 bitrate 1000000
> Controller will still be set to loopback mode in driver due to saved
> priv->ctrlmode.
> 
> This patch clears priv->ctrlmode when the CAN interface is closed,
> and set it to correct mode according to next user setting.
> 
> Signed-off-by: Dong Aisheng <b29396 at freescale.com>

NACK, as discussed with Oliver.

Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20141103/b069e2e4/attachment.sig>