[PATCH v1 3/3] ARM: pxa: move gpio11 clock to board files

[Robert Jarzmik]

The pxa25x gpio11 clock output was previously selected on its pin by the
clock enabling, toggling the pin function.

As we transition to common clock framework, the pin function is moved to
board file for the 2 users, ie. lubbock and eseries.

Signed-off-by: Robert Jarzmik <robert.jarzmik at free.fr>
---
 arch/arm/mach-pxa/eseries.c | 5 ++++-
 arch/arm/mach-pxa/lubbock.c | 3 +++
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index cfb8641..d8fc9a3 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -683,7 +683,7 @@ static unsigned long e750_pin_config[] __initdata = {
 	/* PC Card */
 	GPIO8_GPIO,   /* CD0 */
 	GPIO44_GPIO,  /* CD1 */
-	GPIO11_GPIO,  /* IRQ0 */
+	/* GPIO11_GPIO,  IRQ0 */
 	GPIO6_GPIO,   /* IRQ1 */
 	GPIO27_GPIO,  /* RST0 */
 	GPIO24_GPIO,  /* RST1 */
@@ -778,6 +778,9 @@ static unsigned long e800_pin_config[] __initdata = {
 	GPIO29_AC97_SDATA_IN_0,
 	GPIO30_AC97_SDATA_OUT,
 	GPIO31_AC97_SYNC,
+
+	/* tc6393xb */
+	GPIO11_3_6MHz,
 };
 
 static struct w100_gen_regs e800_lcd_regs = {
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index d8a1be6..b742708 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -101,6 +101,9 @@ static unsigned long lubbock_pin_config[] __initdata = {
 	GPIO6_MMC_CLK,
 	GPIO8_MMC_CS0,
 
+	/* SA1111 chip */
+	GPIO11_3_6MHz,
+
 	/* wakeup */
 	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
 };
-- 
2.1.0