[PATCH v2 0/4] clk: qcom: Add APQ8084 Global Clock Controller support
gdjakov at mm-sol.com
Sat May 31 08:45:30 PDT 2014
This patchset adds support for the global clock controller found on the
APQ8084 based platforms.
Patches 1,2 can go through clk-next and 3,4 through arm-soc.
Changes from v1:
- Moved APQ8084 clocks into a separate file and under separate Kconfig
entry. Dropped the override function patch from v1.
- Added the missing information about resets (suggested by Kumar Gala).
- Made the UART DT node "disabled" in dtsi and "okay" in dts (suggested
by Kumar Gala)
Georgi Djakov (4):
clk: qcom: Add APQ8084 Global Clock Controller documentation
clk: qcom: Add APQ8084 Global Clock Controller support
ARM: dts: qcom: Add APQ8084 Global Clock Controller DT node
ARM: dts: qcom: Add APQ8084 serial port DT node
.../devicetree/bindings/clock/qcom,gcc.txt | 1 +
arch/arm/boot/dts/qcom-apq8084-mtp.dts | 6 +
arch/arm/boot/dts/qcom-apq8084.dtsi | 18 +
drivers/clk/qcom/Kconfig | 8 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/gcc-apq8084.c | 2951 ++++++++++++++++++++
include/dt-bindings/clock/qcom,gcc-apq8084.h | 337 +++
include/dt-bindings/reset/qcom,gcc-apq8084.h | 116 +
8 files changed, 3438 insertions(+)
create mode 100644 drivers/clk/qcom/gcc-apq8084.c
create mode 100644 include/dt-bindings/clock/qcom,gcc-apq8084.h
create mode 100644 include/dt-bindings/reset/qcom,gcc-apq8084.h
More information about the linux-arm-kernel