[PATCH v2 1/5] pinctrl: sunxi: Fix sunxi_irq_cfg_reg not working for irqs >= 8
Hans de Goede
hdegoede at redhat.com
Sat May 31 07:01:35 PDT 2014
Rename SUNXI_IRQ_NUMBER to IRQ_PER_BANK as it no longer represents the total
number of irqs and use it instead of the number of irqs-per-reg when
calculating the bank to use for the various sunxi_irq_xxx_reg functions.
This fixes sunxi_irq_cfg_reg using the wrong bank for irqs >= 8.
Also sunxi_irq_cfg_reg_from_bank returns the address of pio_int_cfg0, add an
offset to the register returned for irqs living in the pio_int_cfg[1-3].
Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
drivers/pinctrl/sunxi/pinctrl-sunxi.c | 12 ++++++------
drivers/pinctrl/sunxi/pinctrl-sunxi.h | 11 ++++++-----
2 files changed, 12 insertions(+), 11 deletions(-)
diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
index 8dc2cd9..d989a10 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
@@ -655,9 +655,9 @@ static void sunxi_pinctrl_irq_handler(unsigned irq, struct irq_desc *desc)
int irqoffset;
chained_irq_enter(chip, desc);
- for_each_set_bit(irqoffset, &val, SUNXI_IRQ_NUMBER) {
+ for_each_set_bit(irqoffset, &val, IRQ_PER_BANK) {
int pin_irq = irq_find_mapping(pctl->domain,
- bank * SUNXI_IRQ_NUMBER + irqoffset);
+ bank * IRQ_PER_BANK + irqoffset);
generic_handle_irq(pin_irq);
}
chained_irq_exit(chip, desc);
@@ -726,7 +726,7 @@ static int sunxi_pinctrl_build_state(struct platform_device *pdev)
while (func->name) {
/* Create interrupt mapping while we're at it */
if (!strcmp(func->name, "irq")) {
- int irqnum = func->irqnum + func->irqbank * SUNXI_IRQ_NUMBER;
+ int irqnum = func->irqnum + func->irqbank * IRQ_PER_BANK;
pctl->irq_array[irqnum] = pin->pin.number;
}
@@ -800,7 +800,7 @@ int sunxi_pinctrl_init(struct platform_device *pdev,
pctl->desc = desc;
pctl->irq_array = devm_kcalloc(&pdev->dev,
- SUNXI_IRQ_NUMBER * pctl->desc->irq_banks,
+ IRQ_PER_BANK * pctl->desc->irq_banks,
sizeof(*pctl->irq_array),
GFP_KERNEL);
if (!pctl->irq_array)
@@ -908,7 +908,7 @@ int sunxi_pinctrl_init(struct platform_device *pdev,
}
pctl->domain = irq_domain_add_linear(node,
- pctl->desc->irq_banks * SUNXI_IRQ_NUMBER,
+ pctl->desc->irq_banks * IRQ_PER_BANK,
&irq_domain_simple_ops,
NULL);
if (!pctl->domain) {
@@ -917,7 +917,7 @@ int sunxi_pinctrl_init(struct platform_device *pdev,
goto clk_error;
}
- for (i = 0; i < (pctl->desc->irq_banks * SUNXI_IRQ_NUMBER); i++) {
+ for (i = 0; i < (pctl->desc->irq_banks * IRQ_PER_BANK); i++) {
int irqno = irq_create_mapping(pctl->domain, i);
irq_set_chip_and_handler(irqno, &sunxi_pinctrl_irq_chip,
diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.h b/drivers/pinctrl/sunxi/pinctrl-sunxi.h
index 8490a45..19b3ae8 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.h
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.h
@@ -53,7 +53,7 @@
#define PULL_PINS_BITS 2
#define PULL_PINS_MASK 0x03
-#define SUNXI_IRQ_NUMBER 32
+#define IRQ_PER_BANK 32
#define IRQ_CFG_REG 0x200
#define IRQ_CFG_IRQ_PER_REG 8
@@ -235,9 +235,10 @@ static inline u32 sunxi_irq_cfg_reg_from_bank(u8 bank)
static inline u32 sunxi_irq_cfg_reg(u16 irq)
{
- u8 bank = irq / IRQ_CFG_IRQ_PER_REG;
+ u8 bank = irq / IRQ_PER_BANK;
+ u32 offset = ((irq % IRQ_PER_BANK) / IRQ_CFG_IRQ_PER_REG) * 0x04;
- return sunxi_irq_cfg_reg_from_bank(bank);
+ return sunxi_irq_cfg_reg_from_bank(bank) + offset;
}
static inline u32 sunxi_irq_cfg_offset(u16 irq)
@@ -253,7 +254,7 @@ static inline u32 sunxi_irq_ctrl_reg_from_bank(u8 bank)
static inline u32 sunxi_irq_ctrl_reg(u16 irq)
{
- u8 bank = irq / IRQ_CTRL_IRQ_PER_REG;
+ u8 bank = irq / IRQ_PER_BANK;
return sunxi_irq_ctrl_reg_from_bank(bank);
}
@@ -271,7 +272,7 @@ static inline u32 sunxi_irq_status_reg_from_bank(u8 bank)
static inline u32 sunxi_irq_status_reg(u16 irq)
{
- u8 bank = irq / IRQ_STATUS_IRQ_PER_REG;
+ u8 bank = irq / IRQ_PER_BANK;
return sunxi_irq_status_reg_from_bank(bank);
}
--
2.0.0
More information about the linux-arm-kernel
mailing list