[PATCH RFT] ARM: imx6q: Remove static memory mapping for SCU

Alexander Shiyan shc_work at mail.ru
Sat May 31 00:40:16 PDT 2014


Signed-off-by: Alexander Shiyan <shc_work at mail.ru>
---
Completely untested.
---
 arch/arm/mach-imx/common.h     |  1 -
 arch/arm/mach-imx/mach-imx6q.c |  8 +-------
 arch/arm/mach-imx/platsmp.c    | 30 +++++++-----------------------
 3 files changed, 8 insertions(+), 31 deletions(-)

diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 9586187..7fdbb18 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -96,7 +96,6 @@ u32 imx_get_cpu_arg(int cpu);
 void imx_set_cpu_arg(int cpu, u32 arg);
 #ifdef CONFIG_SMP
 void v7_secondary_startup(void);
-void imx_scu_map_io(void);
 void imx_smp_prepare(void);
 void imx_scu_standby_enable(void);
 #else
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index e60456d..f3a0170 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -381,12 +381,6 @@ static void __init imx6q_init_late(void)
 	}
 }
 
-static void __init imx6q_map_io(void)
-{
-	debug_ll_io_init();
-	imx_scu_map_io();
-}
-
 static void __init imx6q_init_irq(void)
 {
 	imx_init_revision_from_anatop();
@@ -404,7 +398,7 @@ static const char *imx6q_dt_compat[] __initconst = {
 
 DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad/DualLite (Device Tree)")
 	.smp		= smp_ops(imx_smp_ops),
-	.map_io		= imx6q_map_io,
+	.map_io		= debug_ll_io_init,
 	.init_irq	= imx6q_init_irq,
 	.init_machine	= imx6q_init_machine,
 	.init_late      = imx6q_init_late,
diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c
index 5b57c17..4d3aba0 100644
--- a/arch/arm/mach-imx/platsmp.c
+++ b/arch/arm/mach-imx/platsmp.c
@@ -11,40 +11,18 @@
  */
 
 #include <linux/init.h>
+#include <linux/io.h>
 #include <linux/smp.h>
 #include <asm/cacheflush.h>
-#include <asm/page.h>
 #include <asm/smp_scu.h>
-#include <asm/mach/map.h>
 
 #include "common.h"
-#include "hardware.h"
 
 #define SCU_STANDBY_ENABLE	(1 << 5)
 
 u32 g_diag_reg;
 static void __iomem *scu_base;
 
-static struct map_desc scu_io_desc __initdata = {
-	/* .virtual and .pfn are run-time assigned */
-	.length		= SZ_4K,
-	.type		= MT_DEVICE,
-};
-
-void __init imx_scu_map_io(void)
-{
-	unsigned long base;
-
-	/* Get SCU base */
-	asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base));
-
-	scu_io_desc.virtual = IMX_IO_P2V(base);
-	scu_io_desc.pfn = __phys_to_pfn(base);
-	iotable_init(&scu_io_desc, 1);
-
-	scu_base = IMX_IO_ADDRESS(base);
-}
-
 void imx_scu_standby_enable(void)
 {
 	u32 val = readl_relaxed(scu_base);
@@ -66,8 +44,14 @@ static int imx_boot_secondary(unsigned int cpu, struct task_struct *idle)
  */
 static void __init imx_smp_init_cpus(void)
 {
+	unsigned long base;
 	int i, ncores;
 
+	/* Get SCU base */
+	asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base));
+
+	scu_base = ioremap(base, SZ_4K);
+
 	ncores = scu_get_core_count(scu_base);
 
 	for (i = ncores; i < NR_CPUS; i++)
-- 
1.8.5.5




More information about the linux-arm-kernel mailing list