[PATCH v4 4/4] drivers: net: Add APM X-Gene SoC ethernet driver support.
Iyappan Subramanian
isubramanian at apm.com
Thu May 29 18:19:56 PDT 2014
On Mon, May 5, 2014 at 3:17 PM, Florian Fainelli <f.fainelli at gmail.com> wrote:
> 2014-05-05 14:47 GMT-07:00 Iyappan Subramanian <isubramanian at apm.com>:
>> This patch adds network driver for APM X-Gene SoC ethernet.
>>
>> Signed-off-by: Iyappan Subramanian <isubramanian at apm.com>
>> Signed-off-by: Ravi Patel <rapatel at apm.com>
>> Signed-off-by: Keyur Chudgar <kchudgar at apm.com>
>> ---
>> drivers/net/ethernet/Kconfig | 1 +
>> drivers/net/ethernet/Makefile | 1 +
>> drivers/net/ethernet/apm/Kconfig | 1 +
>> drivers/net/ethernet/apm/Makefile | 5 +
>> drivers/net/ethernet/apm/xgene/Kconfig | 9 +
>> drivers/net/ethernet/apm/xgene/Makefile | 6 +
>> drivers/net/ethernet/apm/xgene/xgene_enet_hw.c | 807 +++++++++++++++++++
>> drivers/net/ethernet/apm/xgene/xgene_enet_hw.h | 353 ++++++++
>> drivers/net/ethernet/apm/xgene/xgene_enet_main.c | 936 ++++++++++++++++++++++
>> drivers/net/ethernet/apm/xgene/xgene_enet_main.h | 131 +++
>> 10 files changed, 2250 insertions(+)
>> create mode 100644 drivers/net/ethernet/apm/Kconfig
>> create mode 100644 drivers/net/ethernet/apm/Makefile
>> create mode 100644 drivers/net/ethernet/apm/xgene/Kconfig
>> create mode 100644 drivers/net/ethernet/apm/xgene/Makefile
>> create mode 100644 drivers/net/ethernet/apm/xgene/xgene_enet_hw.c
>> create mode 100644 drivers/net/ethernet/apm/xgene/xgene_enet_hw.h
>> create mode 100644 drivers/net/ethernet/apm/xgene/xgene_enet_main.c
>> create mode 100644 drivers/net/ethernet/apm/xgene/xgene_enet_main.h
>>
>> diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
>> index 39b26fe..871a438 100644
>> --- a/drivers/net/ethernet/Kconfig
>> +++ b/drivers/net/ethernet/Kconfig
>> @@ -24,6 +24,7 @@ source "drivers/net/ethernet/allwinner/Kconfig"
>> source "drivers/net/ethernet/alteon/Kconfig"
>> source "drivers/net/ethernet/altera/Kconfig"
>> source "drivers/net/ethernet/amd/Kconfig"
>> +source "drivers/net/ethernet/apm/Kconfig"
>> source "drivers/net/ethernet/apple/Kconfig"
>> source "drivers/net/ethernet/arc/Kconfig"
>> source "drivers/net/ethernet/atheros/Kconfig"
>> diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
>> index 545d0b3..291df52 100644
>> --- a/drivers/net/ethernet/Makefile
>> +++ b/drivers/net/ethernet/Makefile
>> @@ -10,6 +10,7 @@ obj-$(CONFIG_NET_VENDOR_ALLWINNER) += allwinner/
>> obj-$(CONFIG_NET_VENDOR_ALTEON) += alteon/
>> obj-$(CONFIG_ALTERA_TSE) += altera/
>> obj-$(CONFIG_NET_VENDOR_AMD) += amd/
>> +obj-$(CONFIG_NET_XGENE) += apm/
>> obj-$(CONFIG_NET_VENDOR_APPLE) += apple/
>> obj-$(CONFIG_NET_VENDOR_ARC) += arc/
>> obj-$(CONFIG_NET_VENDOR_ATHEROS) += atheros/
>> diff --git a/drivers/net/ethernet/apm/Kconfig b/drivers/net/ethernet/apm/Kconfig
>> new file mode 100644
>> index 0000000..ec63d70
>> --- /dev/null
>> +++ b/drivers/net/ethernet/apm/Kconfig
>> @@ -0,0 +1 @@
>> +source "drivers/net/ethernet/apm/xgene/Kconfig"
>> diff --git a/drivers/net/ethernet/apm/Makefile b/drivers/net/ethernet/apm/Makefile
>> new file mode 100644
>> index 0000000..65ce32a
>> --- /dev/null
>> +++ b/drivers/net/ethernet/apm/Makefile
>> @@ -0,0 +1,5 @@
>> +#
>> +# Makefile for APM X-GENE Ethernet driver.
>> +#
>> +
>> +obj-$(CONFIG_NET_XGENE) += xgene/
>> diff --git a/drivers/net/ethernet/apm/xgene/Kconfig b/drivers/net/ethernet/apm/xgene/Kconfig
>> new file mode 100644
>> index 0000000..616dff6
>> --- /dev/null
>> +++ b/drivers/net/ethernet/apm/xgene/Kconfig
>> @@ -0,0 +1,9 @@
>> +config NET_XGENE
>> + tristate "APM X-Gene SoC Ethernet Driver"
>> + select PHYLIB
>> + help
>> + This is the Ethernet driver for the on-chip ethernet interface on the
>> + APM X-Gene SoC.
>> +
>> + To compile this driver as a module, choose M here. This module will
>> + be called xgene_enet.
>> diff --git a/drivers/net/ethernet/apm/xgene/Makefile b/drivers/net/ethernet/apm/xgene/Makefile
>> new file mode 100644
>> index 0000000..60de5fa
>> --- /dev/null
>> +++ b/drivers/net/ethernet/apm/xgene/Makefile
>> @@ -0,0 +1,6 @@
>> +#
>> +# Makefile for APM X-Gene Ethernet Driver.
>> +#
>> +
>> +xgene-enet-objs := xgene_enet_hw.o xgene_enet_main.o
>> +obj-$(CONFIG_NET_XGENE) += xgene-enet.o
>> diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c b/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c
>> new file mode 100644
>> index 0000000..421a841
>> --- /dev/null
>> +++ b/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c
>> @@ -0,0 +1,807 @@
>> +/* Applied Micro X-Gene SoC Ethernet Driver
>> + *
>> + * Copyright (c) 2014, Applied Micro Circuits Corporation
>> + * Authors: Iyappan Subramanian <isubramanian at apm.com>
>> + * Ravi Patel <rapatel at apm.com>
>> + * Keyur Chudgar <kchudgar at apm.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms of the GNU General Public License as published by the
>> + * Free Software Foundation; either version 2 of the License, or (at your
>> + * option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +
>> +#include "xgene_enet_main.h"
>> +#include "xgene_enet_hw.h"
>> +
>> +struct xgene_enet_desc_info desc_info[MAX_DESC_INFO_INDEX] = {
>> + [USERINFO] = {0, USERINFO_POS, USERINFO_LEN},
>> + [FPQNUM] = {0, FPQNUM_POS, FPQNUM_LEN},
>> + [STASH] = {0, STASH_POS, STASH_LEN},
>> + [DATAADDR] = {1, DATAADDR_POS, DATAADDR_LEN},
>> + [BUFDATALEN] = {1, BUFDATALEN_POS, BUFDATALEN_LEN},
>> + [BUFLEN] = {1, BUFLEN_POS, BUFLEN_LEN},
>> + [COHERENT] = {1, COHERENT_POS, COHERENT_LEN},
>> + [TCPHDR] = {3, TCPHDR_POS, TCPHDR_LEN},
>> + [IPHDR] = {3, IPHDR_POS, IPHDR_LEN},
>> + [ETHHDR] = {3, ETHHDR_POS, ETHHDR_LEN},
>> + [EC] = {3, EC_POS, EC_LEN},
>> + [IS] = {3, IS_POS, IS_LEN},
>> + [IC] = {3, IC_POS, IC_LEN},
>> + [TYPESEL] = {3, TYPESEL_POS, TYPESEL_LEN},
>> + [HENQNUM] = {3, HENQNUM_POS, HENQNUM_LEN},
>> +};
>> +
>> +void set_desc(void *desc_ptr, enum desc_info_index index, u64 val)
>> +{
>> + u64 *desc;
>> + u8 i, start_bit, len;
>> + u64 mask;
>> +
>> + desc = desc_ptr;
>> + i = desc_info[index].word_index;
>> + start_bit = desc_info[index].start_bit;
>> + len = desc_info[index].len;
>> + mask = GENMASK_ULL((start_bit + len - 1), start_bit);
>> + desc[i] = (desc[i] & ~mask) | ((val << start_bit) & mask);
>> +}
>
> Woah, this is the most interesting way I have seen to abstract
> bitfields/masks differences... Can't you just have a different
> set_desc()/get_desc() implementation in case you need to handle a
> different version of the hardware that has different bits inside its
> descriptor? Looking up the bits/masks in a table in a hot-path sounds
> sub-optimal to me.
>
> [snip]
Removed table lookup logic. Added separate functions for Tx/Rx/Bufpool
descriptor set/get.
>
>> +
>> +static u32 xgene_enet_wr_indirect(void *addr, void *wr, void *cmd,
>> + void *cmd_done, u32 wr_addr, u32 wr_data)
>> +{
>> + u32 cmd_done_val;
>> +
>> + iowrite32(wr_addr, addr);
>> + iowrite32(wr_data, wr);
>> + iowrite32(XGENE_ENET_WR_CMD, cmd);
>> + udelay(5); /* wait 5 us for completion */
>> + cmd_done_val = ioread32(cmd_done);
>> + iowrite32(0, cmd);
>> + return cmd_done_val;
>
> Is not there a bit you could busy wait on to complete this operation?
> Is there any guarantee that after waiting 5 micro-seconds you get a
> correct value?
Added busy wait logic.
>
>> +}
>> +
>> +static void xgene_enet_wr_mcx_mac(struct xgene_enet_pdata *pdata,
>> + u32 wr_addr, u32 wr_data)
>> +{
>> + void *addr, *wr, *cmd, *cmd_done;
>> + int ret;
>> +
>> + addr = pdata->mcx_mac_addr + MAC_ADDR_REG_OFFSET;
>> + wr = pdata->mcx_mac_addr + MAC_WRITE_REG_OFFSET;
>> + cmd = pdata->mcx_mac_addr + MAC_COMMAND_REG_OFFSET;
>> + cmd_done = pdata->mcx_mac_addr + MAC_COMMAND_DONE_REG_OFFSET;
>> +
>> + ret = xgene_enet_wr_indirect(addr, wr, cmd, cmd_done, wr_addr, wr_data);
>> + if (!ret)
>> + netdev_err(pdata->ndev, "MCX mac write failed, addr: %04x\n",
>> + wr_addr);
>> +}
>> +
>> +static void xgene_enet_rd_csr(struct xgene_enet_pdata *pdata,
>> + u32 offset, u32 *val)
>> +{
>> + void *addr = pdata->eth_csr_addr + offset;
>> +
>> + *val = ioread32(addr);
>> +}
>> +
>> +static void xgene_enet_rd_diag_csr(struct xgene_enet_pdata *pdata,
>> + u32 offset, u32 *val)
>> +{
>> + void *addr = pdata->eth_diag_csr_addr + offset;
>> +
>> + *val = ioread32(addr);
>> +}
>> +
>> +static void xgene_enet_rd_mcx_csr(struct xgene_enet_pdata *pdata,
>> + u32 offset, u32 *val)
>> +{
>> + void *addr = pdata->mcx_mac_csr_addr + offset;
>> +
>> + *val = ioread32(addr);
>> +}
>> +
>> +static u32 xgene_enet_rd_indirect(void *addr, void *rd, void *cmd,
>> + void *cmd_done, u32 rd_addr, u32 *rd_data)
>> +{
>> + u32 cmd_done_val;
>> +
>> + iowrite32(rd_addr, addr);
>> + iowrite32(XGENE_ENET_RD_CMD, cmd);
>> + udelay(5); /* wait 5 us for completion */
>> + cmd_done_val = ioread32(cmd_done);
>> + *rd_data = ioread32(rd);
>> + iowrite32(0, cmd);
>> +
>> + return cmd_done_val;
>> +}
>> +
>> +static void xgene_enet_rd_mcx_mac(struct xgene_enet_pdata *pdata,
>> + u32 rd_addr, u32 *rd_data)
>> +{
>> + void *addr, *rd, *cmd, *cmd_done;
>> + int ret;
>> +
>> + addr = pdata->mcx_mac_addr + MAC_ADDR_REG_OFFSET;
>> + rd = pdata->mcx_mac_addr + MAC_READ_REG_OFFSET;
>> + cmd = pdata->mcx_mac_addr + MAC_COMMAND_REG_OFFSET;
>> + cmd_done = pdata->mcx_mac_addr + MAC_COMMAND_DONE_REG_OFFSET;
>> +
>> + ret = xgene_enet_rd_indirect(addr, rd, cmd, cmd_done, rd_addr, rd_data);
>> + if (!ret)
>> + netdev_err(pdata->ndev, "MCX mac read failed, addr: %04x\n",
>> + rd_addr);
>> +}
>> +
>> +static void xgene_enet_rd_mcx_stats(struct xgene_enet_pdata *pdata,
>> + u32 rd_addr, u32 *rd_data)
>> +{
>> + void *addr, *rd, *cmd, *cmd_done;
>> + int ret;
>> +
>> + addr = pdata->mcx_stats_addr + STAT_ADDR_REG_OFFSET;
>> + rd = pdata->mcx_stats_addr + STAT_READ_REG_OFFSET;
>> + cmd = pdata->mcx_stats_addr + STAT_COMMAND_REG_OFFSET;
>> + cmd_done = pdata->mcx_stats_addr + STAT_COMMAND_DONE_REG_OFFSET;
>> +
>> + ret = xgene_enet_rd_indirect(addr, rd, cmd, cmd_done, rd_addr, rd_data);
>> + if (!ret)
>> + netdev_err(pdata->ndev, "MCX stats read failed, addr: %04x\n",
>> + rd_addr);
>> +}
>> +
>> +void xgene_genericmiiphy_write(struct xgene_enet_pdata *pdata, int phy_id,
>> + u32 reg, u16 data)
>> +{
>
> The name could probably be shortened to something like xgen_mii_phy_write()?
Renamed as suggested.
>
>> + u32 addr = 0, wr_data = 0, done;
>> +
>> + PHY_ADDR_SET(&addr, phy_id);
>> + REG_ADDR_SET(&addr, reg);
>> + xgene_enet_wr_mcx_mac(pdata, MII_MGMT_ADDRESS_ADDR, addr);
>> +
>> + PHY_CONTROL_SET(&wr_data, data);
>> + xgene_enet_wr_mcx_mac(pdata, MII_MGMT_CONTROL_ADDR, wr_data);
>> +
>> + usleep_range(20, 30); /* wait 20 us for completion */
>> + xgene_enet_rd_mcx_mac(pdata, MII_MGMT_INDICATORS_ADDR, &done);
>> + if (done & BUSY_MASK)
>> + netdev_err(pdata->ndev, "MII_MGMT write failed\n");
>
> Please propagate the error to the caller in case you fail the write operation.
Changed to propagate the error status.
>
>> +}
>> +
>> +void xgene_genericmiiphy_read(struct xgene_enet_pdata *pdata, u8 phy_id,
>> + u32 reg, u32 *data)
>> +{
>> + u32 addr = 0, done;
>> +
>> + PHY_ADDR_SET(&addr, phy_id);
>> + REG_ADDR_SET(&addr, reg);
>> + xgene_enet_wr_mcx_mac(pdata, MII_MGMT_ADDRESS_ADDR, addr);
>> + xgene_enet_wr_mcx_mac(pdata, MII_MGMT_COMMAND_ADDR, READ_CYCLE_MASK);
>> +
>> + usleep_range(20, 30); /* wait 20 us for completion */
>> + xgene_enet_rd_mcx_mac(pdata, MII_MGMT_INDICATORS_ADDR, &done);
>> + if (done & BUSY_MASK)
>> + netdev_err(pdata->ndev, "MII_MGMT read failed\n");
>
> Same here
>
>> +
>> + xgene_enet_rd_mcx_mac(pdata, MII_MGMT_STATUS_ADDR, data);
>> + xgene_enet_wr_mcx_mac(pdata, MII_MGMT_COMMAND_ADDR, 0);
>> +}
>> +
>> +void xgene_gmac_set_mac_addr(struct xgene_enet_pdata *pdata)
>> +{
>> + u32 addr0, addr1;
>> + u8 *dev_addr = pdata->ndev->dev_addr;
>> +
>> + addr0 = (dev_addr[3] << 24) | (dev_addr[2] << 16) |
>> + (dev_addr[1] << 8) | dev_addr[0];
>> + addr1 = (dev_addr[5] << 24) | (dev_addr[4] << 16);
>> + addr1 |= pdata->phy_addr & 0xFFFF;
>> +
>> + xgene_enet_wr_mcx_mac(pdata, STATION_ADDR0_ADDR, addr0);
>> + xgene_enet_wr_mcx_mac(pdata, STATION_ADDR1_ADDR, addr1);
>> +}
>> +
>
> [snip]
>
>> +static void xgene_gmac_phy_enable_scan_cycle(struct xgene_enet_pdata *pdata,
>> + int enable)
>> +{
>> + u32 val;
>> +
>> + xgene_enet_rd_mcx_mac(pdata, MII_MGMT_COMMAND_ADDR, &val);
>> + SCAN_CYCLE_MASK_SET(&val, enable);
>> + xgene_enet_wr_mcx_mac(pdata, MII_MGMT_COMMAND_ADDR, val);
>> +
>> + /* Program phy address start scan from 0 and register at address 0x1 */
>> + xgene_enet_rd_mcx_mac(pdata, MII_MGMT_ADDRESS_ADDR, &val);
>> + PHY_ADDR_SET(&val, 0);
>> + REG_ADDR_SET(&val, 1);
>
> If you have a PHY polling unit which monitors the values in MII_BMSR,
> please use that constant here instead of 0x1. Should not the PHY
> address match what has been provided by the Device Tree? Your binding
> example provides a PHY at address 3...
Changed to use MII_BMSR macro and phy address from dtb.
>
>> + xgene_enet_wr_mcx_mac(pdata, MII_MGMT_ADDRESS_ADDR, val);
>> +}
>> +
>> +void xgene_gmac_reset(struct xgene_enet_pdata *pdata)
>> +{
>> + xgene_enet_wr_mcx_mac(pdata, MAC_CONFIG_1_ADDR, SOFT_RESET1);
>> + xgene_enet_wr_mcx_mac(pdata, MAC_CONFIG_1_ADDR, 0);
>> +}
>> +
>> +void xgene_gmac_init(struct xgene_enet_pdata *pdata, int speed)
>> +{
>> + u32 value, mc2;
>> + u32 intf_ctl, rgmii;
>> + u32 icm0, icm2;
>> +
>> + xgene_gmac_reset(pdata);
>> +
>> + xgene_enet_rd_mcx_csr(pdata, ICM_CONFIG0_REG_0_ADDR, &icm0);
>> + xgene_enet_rd_mcx_csr(pdata, ICM_CONFIG2_REG_0_ADDR, &icm2);
>> + xgene_enet_rd_mcx_mac(pdata, MAC_CONFIG_2_ADDR, &mc2);
>> + xgene_enet_rd_mcx_mac(pdata, INTERFACE_CONTROL_ADDR, &intf_ctl);
>> + xgene_enet_rd_csr(pdata, RGMII_REG_0_ADDR, &rgmii);
>> +
>> + switch (speed) {
>> + case SPEED_10:
>> + ENET_INTERFACE_MODE2_SET(&mc2, 1);
>> + CFG_MACMODE_SET(&icm0, 0);
>> + CFG_WAITASYNCRD_SET(&icm2, 500);
>> + rgmii &= ~CFG_SPEED_1250;
>> + break;
>> + case SPEED_100:
>> + ENET_INTERFACE_MODE2_SET(&mc2, 1);
>> + intf_ctl |= ENET_LHD_MODE;
>> + CFG_MACMODE_SET(&icm0, 1);
>> + CFG_WAITASYNCRD_SET(&icm2, 80);
>> + rgmii &= ~CFG_SPEED_1250;
>> + break;
>> + default:
>> + ENET_INTERFACE_MODE2_SET(&mc2, 2);
>> + intf_ctl |= ENET_GHD_MODE;
>> + CFG_TXCLK_MUXSEL0_SET(&rgmii, 4);
>> + xgene_enet_rd_csr(pdata, DEBUG_REG_ADDR, &value);
>> + value |= CFG_BYPASS_UNISEC_TX | CFG_BYPASS_UNISEC_RX;
>> + xgene_enet_wr_csr(pdata, DEBUG_REG_ADDR, value);
>> + break;
>> + }
>> +
>> + mc2 |= FULL_DUPLEX2;
>> + xgene_enet_wr_mcx_mac(pdata, MAC_CONFIG_2_ADDR, mc2);
>> + xgene_enet_wr_mcx_mac(pdata, INTERFACE_CONTROL_ADDR, intf_ctl);
>> +
>> + xgene_gmac_set_mac_addr(pdata);
>> +
>> + /* Adjust MDC clock frequency */
>> + xgene_enet_rd_mcx_mac(pdata, MII_MGMT_CONFIG_ADDR, &value);
>> + MGMT_CLOCK_SEL_SET(&value, 7);
>> + xgene_enet_wr_mcx_mac(pdata, MII_MGMT_CONFIG_ADDR, value);
>> +
>> + /* Enable drop if bufpool not available */
>> + xgene_enet_rd_csr(pdata, RSIF_CONFIG_REG_ADDR, &value);
>> + value |= CFG_RSIF_FPBUFF_TIMEOUT_EN;
>> + xgene_enet_wr_csr(pdata, RSIF_CONFIG_REG_ADDR, value);
>> +
>> + /* Rtype should be copied from FP */
>> + xgene_enet_wr_csr(pdata, RSIF_RAM_DBG_REG0_ADDR, 0);
>> + xgene_enet_wr_csr(pdata, RGMII_REG_0_ADDR, rgmii);
>> +
>> + /* Rx-Tx traffic resume */
>> + xgene_enet_wr_csr(pdata, CFG_LINK_AGGR_RESUME_0_ADDR, TX_PORT0);
>> +
>> + xgene_enet_wr_mcx_csr(pdata, ICM_CONFIG0_REG_0_ADDR, icm0);
>> + xgene_enet_wr_mcx_csr(pdata, ICM_CONFIG2_REG_0_ADDR, icm2);
>> +
>> + xgene_enet_rd_mcx_csr(pdata, RX_DV_GATE_REG_0_ADDR, &value);
>> + value &= ~TX_DV_GATE_EN0;
>> + value &= ~RX_DV_GATE_EN0;
>> + value |= RESUME_RX0;
>> + xgene_enet_wr_mcx_csr(pdata, RX_DV_GATE_REG_0_ADDR, value);
>> +
>> + xgene_enet_wr_csr(pdata, CFG_BYPASS_ADDR, RESUME_TX);
>> +}
>> +
>> +/* Start Statistics related functions */
>> +static void xgene_gmac_get_rx_stats(struct xgene_enet_pdata *pdata,
>> + struct xgene_enet_rx_stats *rx_stat)
>> +{
>> + xgene_enet_rd_mcx_stats(pdata, RBYT_ADDR, &rx_stat->byte_cntr);
>> + xgene_enet_rd_mcx_stats(pdata, RPKT_ADDR, &rx_stat->pkt_cntr);
>> + xgene_enet_rd_mcx_stats(pdata, RDRP_ADDR, &rx_stat->dropped_pkt_cntr);
>> + xgene_enet_rd_mcx_stats(pdata, RFCS_ADDR, &rx_stat->fcs_error_cntr);
>> + xgene_enet_rd_mcx_stats(pdata, RFLR_ADDR, &rx_stat->frm_len_err_cntr);
>> + xgene_enet_rd_mcx_stats(pdata, RALN_ADDR, &rx_stat->align_err_cntr);
>> + xgene_enet_rd_mcx_stats(pdata, ROVR_ADDR, &rx_stat->oversize_pkt_cntr);
>> + xgene_enet_rd_mcx_stats(pdata, RUND_ADDR, &rx_stat->undersize_pkt_cntr);
>> +}
>> +
>> +static void xgene_gmac_get_tx_stats(struct xgene_enet_pdata *pdata,
>> + struct xgene_enet_tx_stats *tx_stats)
>> +{
>> + xgene_enet_rd_mcx_stats(pdata, TBYT_ADDR, &tx_stats->byte_cntr);
>> + xgene_enet_rd_mcx_stats(pdata, TPKT_ADDR, &tx_stats->pkt_cntr);
>> + xgene_enet_rd_mcx_stats(pdata, TDRP_ADDR, &tx_stats->drop_frame_cntr);
>> + xgene_enet_rd_mcx_stats(pdata, TFCS_ADDR, &tx_stats->fcs_error_cntr);
>> + xgene_enet_rd_mcx_stats(pdata, TUND_ADDR,
>> + &tx_stats->undersize_frame_cntr);
>> +}
>> +
>> +void xgene_gmac_get_stats(struct xgene_enet_pdata *pdata,
>> + struct xgene_enet_stats *stats)
>> +{
>> + xgene_gmac_get_rx_stats(pdata, &stats->rx_stats);
>> + xgene_gmac_get_tx_stats(pdata, &stats->tx_stats);
>> +}
>> +
>> +static void xgene_enet_config_ring_if_assoc(struct xgene_enet_pdata *pdata)
>> +{
>> + u32 val = 0xffffffff;
>> +
>> + xgene_enet_wr_ring_if(pdata, ENET_CFGSSQMIWQASSOC_ADDR, val);
>> + xgene_enet_wr_ring_if(pdata, ENET_CFGSSQMIFPQASSOC_ADDR, val);
>> + xgene_enet_wr_ring_if(pdata, ENET_CFGSSQMIQMLITEWQASSOC_ADDR, val);
>> + xgene_enet_wr_ring_if(pdata, ENET_CFGSSQMIQMLITEFPQASSOC_ADDR, val);
>> +}
>> +
>> +void xgene_enet_cle_bypass(struct xgene_enet_pdata *pdata,
>> + u32 dst_ring_num, u32 fpsel, u32 nxtfpsel)
>> +{
>> + u32 cb;
>> +
>> + xgene_enet_rd_csr(pdata, CLE_BYPASS_REG0_0_ADDR, &cb);
>> + cb |= CFG_CLE_BYPASS_EN0;
>> + CFG_CLE_IP_PROTOCOL0_SET(&cb, 3);
>> + xgene_enet_wr_csr(pdata, CLE_BYPASS_REG0_0_ADDR, cb);
>> +
>> + xgene_enet_rd_csr(pdata, CLE_BYPASS_REG1_0_ADDR, &cb);
>> + CFG_CLE_DSTQID0_SET(&cb, dst_ring_num);
>> + CFG_CLE_FPSEL0_SET(&cb, fpsel);
>> + xgene_enet_wr_csr(pdata, CLE_BYPASS_REG1_0_ADDR, cb);
>> +}
>> +
>> +void xgene_gmac_rx_enable(struct xgene_enet_pdata *pdata)
>> +{
>> + u32 data;
>> +
>> + xgene_enet_rd_mcx_mac(pdata, MAC_CONFIG_1_ADDR, &data);
>> + xgene_enet_wr_mcx_mac(pdata, MAC_CONFIG_1_ADDR, data | RX_EN);
>> +}
>> +
>> +void xgene_gmac_tx_enable(struct xgene_enet_pdata *pdata)
>> +{
>> + u32 data;
>> +
>> + xgene_enet_rd_mcx_mac(pdata, MAC_CONFIG_1_ADDR, &data);
>> + xgene_enet_wr_mcx_mac(pdata, MAC_CONFIG_1_ADDR, data | TX_EN);
>> +}
>> +
>> +void xgene_gmac_rx_disable(struct xgene_enet_pdata *pdata)
>> +{
>> + u32 data;
>> +
>> + xgene_enet_rd_mcx_mac(pdata, MAC_CONFIG_1_ADDR, &data);
>> + xgene_enet_wr_mcx_mac(pdata, MAC_CONFIG_1_ADDR, data & ~RX_EN);
>> +}
>> +
>> +void xgene_gmac_tx_disable(struct xgene_enet_pdata *pdata)
>> +{
>> + u32 data;
>> +
>> + xgene_enet_rd_mcx_mac(pdata, MAC_CONFIG_1_ADDR, &data);
>> + xgene_enet_wr_mcx_mac(pdata, MAC_CONFIG_1_ADDR, data & ~TX_EN);
>> +}
>
> Do any of these functions need to be used outside of this object?
Yes. They are used outside of this file.
>
>> +
>> +void xgene_enet_reset(struct xgene_enet_pdata *pdata)
>> +{
>> + u32 val;
>> +
>> + clk_prepare_enable(pdata->clk);
>> + clk_disable_unprepare(pdata->clk);
>> + clk_prepare_enable(pdata->clk);
>> + xgene_enet_ecc_init(pdata);
>> + xgene_enet_config_ring_if_assoc(pdata);
>> +
>> + /* Enable auto-incr for scanning */
>> + xgene_enet_rd_mcx_mac(pdata, MII_MGMT_CONFIG_ADDR, &val);
>> + val |= SCAN_AUTO_INCR;
>> + MGMT_CLOCK_SEL_SET(&val, 1);
>> + xgene_enet_wr_mcx_mac(pdata, MII_MGMT_CONFIG_ADDR, val);
>> + xgene_gmac_phy_enable_scan_cycle(pdata, 1);
>> +}
>> +
>> +void xgene_gport_shutdown(struct xgene_enet_pdata *pdata)
>> +{
>> + clk_disable_unprepare(pdata->clk);
>> +}
>> +
>> +static int xgene_enet_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
>> +{
>> + struct xgene_enet_pdata *pdata = bus->priv;
>> + u32 val;
>> +
>> + xgene_genericmiiphy_read(pdata, mii_id, regnum, &val);
>> + netdev_dbg(pdata->ndev, "mdio_rd: bus=%d reg=%d val=%x\n",
>> + mii_id, regnum, val);
>> +
>> + return val;
>> +}
>> +
>> +static int xgene_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
>> + u16 val)
>> +{
>> + struct xgene_enet_pdata *pdata = bus->priv;
>> +
>> + netdev_dbg(pdata->ndev, "mdio_wr: bus=%d reg=%d val=%x\n",
>> + mii_id, regnum, val);
>> + xgene_genericmiiphy_write(pdata, mii_id, regnum, val);
>> +
>> + return 0;
>> +}
>> +
>> +static void xgene_enet_adjust_link(struct net_device *ndev)
>> +{
>> + struct xgene_enet_pdata *pdata = netdev_priv(ndev);
>> + struct phy_device *phydev = pdata->phy_dev;
>> + bool status_change = false;
>> +
>> + if (phydev->link && pdata->phy_speed != phydev->speed) {
>> + xgene_gmac_init(pdata, phydev->speed);
>> + pdata->phy_speed = phydev->speed;
>> + status_change = true;
>> + }
>> +
>> + if (pdata->phy_link != phydev->link) {
>> + if (!phydev->link)
>> + pdata->phy_speed = 0;
>> + pdata->phy_link = phydev->link;
>> + status_change = true;
>> + }
>> +
>> + if (!status_change)
>> + goto out;
>
> You could just use a 'return' here. Defining a label only makes sense
> if multiple code-paths can jump to it.
Changed to use goto only when common work needs to be done.
>
>> +
>> + if (phydev->link) {
>> + xgene_gmac_rx_enable(pdata);
>> + xgene_gmac_tx_enable(pdata);
>> + } else {
>> + xgene_gmac_rx_disable(pdata);
>> + xgene_gmac_tx_disable(pdata);
>> + }
>> + phy_print_status(phydev);
>> +out:
>> + return;
>> +}
>> +
>> +static int xgene_enet_phy_connect(struct net_device *ndev)
>> +{
>> + struct xgene_enet_pdata *pdata = netdev_priv(ndev);
>> + struct device_node *phy_np;
>> + struct phy_device *phy_dev;
>> + int ret = 0;
>> +
>> + struct device *dev = &pdata->pdev->dev;
>> +
>> + phy_np = of_parse_phandle(dev->of_node, "phy-handle", 0);
>> +
>> + if (!phy_np) {
>> + netdev_dbg(ndev, "No phy-handle found\n");
>> + ret = -ENODEV;
>> + }
>> +
>> + phy_dev = of_phy_connect(ndev, phy_np, &xgene_enet_adjust_link,
>> + 0, pdata->phy_mode);
>> + if (!phy_dev) {
>> + netdev_err(ndev, "Could not connect to PHY\n");
>> + ret = -ENODEV;
>> + goto out;
>> + }
>> +
>> +out:
>> + pdata->phy_link = 0;
>> + pdata->phy_speed = 0;
>> + pdata->phy_dev = phy_dev;
>> +
>> + return ret;
>> +}
>> +
>> +int xgene_enet_mdio_config(struct xgene_enet_pdata *pdata)
>> +{
>> + struct net_device *ndev = pdata->ndev;
>> + struct device *dev = &pdata->pdev->dev;
>> + struct device_node *child_np = NULL;
>> + struct device_node *mdio_np = NULL;
>> + struct mii_bus *mdio_bus = NULL;
>> + int ret;
>> +
>> + for_each_child_of_node(dev->of_node, child_np) {
>> + if (of_device_is_compatible(child_np, "apm,xgene-mdio")) {
>> + mdio_np = child_np;
>> + break;
>> + }
>> + }
>> +
>> + if (!mdio_np) {
>> + netdev_dbg(ndev, "No mdio node in the dts\n");
>> + ret = -1;
>> + goto err;
>> + }
>> +
>> + mdio_bus = mdiobus_alloc();
>> + if (!mdio_bus) {
>> + ret = -ENOMEM;
>> + goto err;
>> + }
>> +
>> + mdio_bus->name = "APM X-Gene MDIO bus";
>> + mdio_bus->read = xgene_enet_mdio_read;
>> + mdio_bus->write = xgene_enet_mdio_write;
>> + snprintf(mdio_bus->id, MII_BUS_ID_SIZE, "%s", "xgene-enet-mii");
>
> You should a more specific name here, something that is not going to
> conflict as soon as two devices will be instantiated. Something like
> pdev->name or np->full_name does work.
Changed to use net_device->name. Is that okay ?
>
>> +
>> + mdio_bus->irq = devm_kcalloc(dev, PHY_MAX_ADDR, sizeof(int),
>> + GFP_KERNEL);
>> + if (mdio_bus->irq == NULL) {
>> + ret = -ENOMEM;
>> + goto err;
>> + }
>> +
>> + mdio_bus->priv = pdata;
>> + mdio_bus->parent = &ndev->dev;
>> +
>> + ret = of_mdiobus_register(mdio_bus, mdio_np);
>> + if (ret) {
>> + netdev_err(ndev, "Failed to register MDIO bus\n");
>> + goto err;
>> + }
>> + pdata->mdio_bus = mdio_bus;
>> + ret = xgene_enet_phy_connect(ndev);
>
> if xgene_enet_phy_connect() fails, you are leaking the MDIO bus
> structure, this ought to be:
>
> if (ret)
> goto err;
>
> return ret;
Fixed the problem.
>
>> +
>> + return ret;
>> +err:
>> + if (mdio_bus) {
>> + if (mdio_bus->irq)
>> + devm_kfree(dev, mdio_bus->irq);
>> + mdiobus_free(mdio_bus);
>> + }
>> + return ret;
>
> [snip]
>
>> +
>> +irqreturn_t xgene_enet_rx_irq(const int irq, void *data)
>> +{
>> + struct xgene_enet_desc_ring *rx_ring = data;
>> +
>> + if (napi_schedule_prep(&rx_ring->napi)) {
>> + disable_irq_nosync(irq);
>
> Can't you mask the relevant interrupt sources at the Ethernet
> controller level instead? This can be pretty expensive in a hot-path
> like this.
Hardware does not support masking the interrupt and let the GIC handle that.
Do you think the performance will be hit even with NAPI ?
>
>> + __napi_schedule(&rx_ring->napi);
>> + }
>> +
>> + return IRQ_HANDLED;
>> +}
>> +
>> +static int xgene_enet_tx_completion(struct xgene_enet_desc_ring *cp_ring,
>> + struct xgene_enet_desc *desc)
>> +{
>> + struct sk_buff *skb;
>> + dma_addr_t pa;
>> + size_t len;
>> + struct device *dev;
>> + u16 skb_index;
>> + int ret = 0;
>> +
>> + skb_index = get_desc(desc, USERINFO);
>> + skb = cp_ring->cp_skb[skb_index];
>> +
>> + dev = ndev_to_dev(cp_ring->ndev);
>> + pa = (dma_addr_t)get_desc(desc, DATAADDR);
>> + len = get_desc(desc, BUFDATALEN);
>> + dma_unmap_single(dev, pa, len, DMA_TO_DEVICE);
>> +
>> + if (likely(skb)) {
>> + dev_kfree_skb_any(skb);
>> + } else {
>> + netdev_err(cp_ring->ndev, "completion skb is NULL\n");
>> + ret = -1;
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +static void xgene_enet_checksum_offload(struct xgene_enet_desc *desc,
>> + struct sk_buff *skb)
>> +{
>> + u32 maclen, nr_frags;
>> + struct iphdr *iph;
>> + u8 l4hlen = 0;
>> + u8 l3hlen = 0;
>> + u8 csum_enable = 0;
>> + u8 proto = 0;
>> + struct net_device *ndev = skb->dev;
>> +
>> + if (unlikely(!(ndev->features & NETIF_F_IP_CSUM)))
>> + goto out;
>> + if (unlikely(skb->protocol != htons(ETH_P_IP)) &&
>> + unlikely(skb->protocol != htons(ETH_P_8021Q)))
>> + goto out;
>
> No IPv6 support?
IPv6 is supported. I will add IPv6 checksum offload shortly.
>
>> +
>> + nr_frags = skb_shinfo(skb)->nr_frags;
>> + maclen = xgene_enet_hdr_len(skb->data);
>> + iph = ip_hdr(skb);
>> + l3hlen = ip_hdrlen(skb) >> 2;
>> +
>> + if (unlikely(iph->frag_off & htons(IP_MF | IP_OFFSET)))
>> + goto out;
>> + if (likely(iph->protocol == IPPROTO_TCP)) {
>> + l4hlen = tcp_hdrlen(skb) / 4;
>> + csum_enable = 1;
>> + proto = TSO_IPPROTO_TCP;
>> + } else if (iph->protocol == IPPROTO_UDP) {
>> + l4hlen = UDP_HDR_SIZE;
>> + csum_enable = 1;
>> + proto = TSO_IPPROTO_UDP;
>> + }
>> +
>> + set_desc(desc, TCPHDR, l4hlen);
>> + set_desc(desc, IPHDR, l3hlen);
>> + set_desc(desc, EC, csum_enable);
>> + set_desc(desc, IS, proto);
>> +out:
>> + return;
>> +}
>> +
>> +static int xgene_enet_setup_tx_desc(struct xgene_enet_desc_ring *tx_ring,
>> + struct sk_buff *skb)
>> +{
>> + struct xgene_enet_desc *desc;
>> + dma_addr_t dma_addr;
>> + u8 ethhdr;
>> + u16 tail = tx_ring->tail;
>> + struct device *dev = ndev_to_dev(tx_ring->ndev);
>> +
>> + desc = &tx_ring->desc[tail];
>> + memset(desc, 0, sizeof(struct xgene_enet_desc));
>> +
>> + dma_addr = dma_map_single(dev, skb->data, skb->len, DMA_TO_DEVICE);
>> + if (dma_mapping_error(dev, dma_addr)) {
>> + netdev_err(tx_ring->ndev, "DMA mapping error\n");
>> + return -EINVAL;
>> + }
>> + set_desc(desc, DATAADDR, dma_addr);
>> +
>> + set_desc(desc, BUFDATALEN, skb->len);
>> + set_desc(desc, COHERENT, 1);
>> + tx_ring->cp_ring->cp_skb[tail] = skb;
>> + set_desc(desc, USERINFO, tail);
>> + set_desc(desc, HENQNUM, tx_ring->dst_ring_num);
>> + set_desc(desc, TYPESEL, 1);
>> + ethhdr = xgene_enet_hdr_len(skb->data);
>> + set_desc(desc, ETHHDR, ethhdr);
>> + set_desc(desc, IC, 1);
>> +
>> + xgene_enet_checksum_offload(desc, skb);
>> +
>> + /* Hardware expects descriptor in little endian format */
>> + xgene_enet_cpu_to_le64(desc, 4);
>> +
>> + return 0;
>> +}
>> +
>> +static netdev_tx_t xgene_enet_start_xmit(struct sk_buff *skb,
>> + struct net_device *ndev)
>> +{
>> + struct xgene_enet_pdata *pdata = netdev_priv(ndev);
>> + struct xgene_enet_desc_ring *tx_ring = pdata->tx_ring;
>> + struct xgene_enet_desc_ring *cp_ring = tx_ring->cp_ring;
>> + u32 tx_level, cq_level;
>> + u32 pkt_count = 1;
>> +
>> + tx_level = xgene_enet_ring_len(tx_ring);
>> + cq_level = xgene_enet_ring_len(cp_ring);
>> + if (tx_level > pdata->tx_qcnt_hi || cq_level > pdata->cp_qcnt_hi) {
>> + netif_stop_queue(ndev);
>> + return NETDEV_TX_BUSY;
>> + }
>> +
>> + if (xgene_enet_setup_tx_desc(tx_ring, skb))
>> + goto out;
>> +
>> + skb_tx_timestamp(skb);
>> +
>> + tx_ring->tail = (tx_ring->tail + 1) & (tx_ring->slots - 1);
>> + iowrite32(pkt_count, tx_ring->cmd);
>
> You should also check the ring space at the end of the
> ndo_start_xmit() call and update the TX queue flow control
> appropriately.
I am sorry I did not get that. Are you suggesting to check the ring
level again at
the end of xmit function and stop the queue ? Ring level is checked in the
completion/Rx interrupt and queue is woke up accordingly.
I believe the function name xgene_enet_ring_len() is misleading.
This function returns the ring current fill level.
>
>> +out:
>> + return NETDEV_TX_OK;
>> +}
>> +
>> +void xgene_enet_skip_csum(struct sk_buff *skb)
>> +{
>> + struct iphdr *iph = (struct iphdr *)skb->data;
>> +
>> + if (!(iph->frag_off & htons(IP_MF | IP_OFFSET)) ||
>> + (iph->protocol != IPPROTO_TCP && iph->protocol != IPPROTO_UDP)) {
>> + skb->ip_summed = CHECKSUM_UNNECESSARY;
>> + }
>> +}
>> +
>> +static int xgene_enet_rx_frame(struct xgene_enet_desc_ring *rx_ring,
>> + struct xgene_enet_desc *desc)
>> +{
>> + struct net_device *ndev = rx_ring->ndev;
>> + struct device *dev = ndev_to_dev(rx_ring->ndev);
>> + struct xgene_enet_desc_ring *buf_pool = rx_ring->buf_pool;
>> + u32 datalen, skb_index;
>> + struct sk_buff *skb;
>> + dma_addr_t pa;
>> + int ret = 0;
>> +
>> + skb_index = get_desc(desc, USERINFO);
>> + skb = buf_pool->rx_skb[skb_index];
>> + prefetch(skb->data - NET_IP_ALIGN);
>
> You might be pre-fetching stale data at this point, you have not yet
> called dma_unmap_single(), you probably want to move this call after
> dma_unmap_single() to do anything useful with the packet contents.
I moved the dma_unmap_single() to the start of the function.
>
>> +
>> + /* Strip off CRC as HW isn't doing this */
>> + datalen = get_desc(desc, BUFDATALEN);
>> + datalen -= 4;
>> + skb_put(skb, datalen);
>
> Don't you have any per-packet descriptor bits that tell you whether
> the packet was an error packet (oversized, frame length error, fifo
> error etc...).
I added support for error handling.
>
>> +
>> + pa = (dma_addr_t)get_desc(desc, DATAADDR);
>> + dma_unmap_single(dev, pa, XGENE_ENET_MAX_MTU, DMA_FROM_DEVICE);
>> +
>> + if (--rx_ring->nbufpool == 0) {
>> + ret = xgene_enet_refill_bufpool(buf_pool, NUM_BUFPOOL);
>> + rx_ring->nbufpool = NUM_BUFPOOL;
>> + }
>> +
>> + skb_checksum_none_assert(skb);
>> + skb->protocol = eth_type_trans(skb, ndev);
>> + if (likely((ndev->features & NETIF_F_IP_CSUM) &&
>> + skb->protocol == htons(ETH_P_IP))) {
>> + xgene_enet_skip_csum(skb);
>> + }
>
> Where are the RX counters increased?
I was reading the hardware registers. I changed to let the software
manage the Rx packet and error counters.
> --
> Florian
More information about the linux-arm-kernel
mailing list