[PATCHv2 04/15] ARM: at91: sam9263ek: use generic leds_pwm driver

[Alexandre Belloni]

Switch to the generic leds_pwm driver instead of leds-atmel-pwm.

Signed-off-by: Alexandre Belloni <alexandre.belloni at free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre at atmel.com>
---
 arch/arm/mach-at91/board-sam9263ek.c | 55 ++++++++++++++++++++++++++++++------
 1 file changed, 47 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index cd2726ee5add..fc446097f410 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -32,6 +32,8 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/leds.h>
+#include <linux/pwm.h>
+#include <linux/leds_pwm.h>
 
 #include <video/atmel_lcdc.h>
 
@@ -369,21 +371,47 @@ static struct gpio_led ek_leds[] = {
 		.name			= "ds3",
 		.gpio			= AT91_PIN_PB7,
 		.default_trigger	= "heartbeat",
+	},
+#if !IS_ENABLED(CONFIG_LEDS_PWM)
+	{
+		.name			= "ds1",
+		.gpio			= AT91_PIN_PB8,
+		.active_low		= 1,
+		.default_trigger	= "none",
 	}
+#endif
 };
 
 /*
  * PWM Leds
  */
-static struct gpio_led ek_pwm_led[] = {
-	/* For now only DS1 is PWM-driven (by pwm1) */
+static struct pwm_lookup pwm_lookup[] = {
+	PWM_LOOKUP("at91sam9rl-pwm", 1, "leds_pwm", "ds1",
+		   5000, PWM_POLARITY_INVERSED),
+};
+
+#if IS_ENABLED(CONFIG_LEDS_PWM)
+static struct led_pwm pwm_leds[] = {
 	{
-		.name			= "ds1",
-		.gpio			= 1,	/* is PWM channel number */
-		.active_low		= 1,
-		.default_trigger	= "none",
-	}
+		.name = "ds1",
+		.max_brightness = 255,
+	},
+};
+
+static struct led_pwm_platform_data pwm_data = {
+	.num_leds       = ARRAY_SIZE(pwm_leds),
+	.leds           = pwm_leds,
+};
+
+static struct platform_device leds_pwm = {
+	.name   = "leds_pwm",
+	.id     = -1,
+	.dev    = {
+		.platform_data = &pwm_data,
+	},
 };
+#endif
+
 
 /*
  * CAN
@@ -403,6 +431,12 @@ static struct at91_can_data ek_can_data = {
 	.transceiver_switch = sam9263ek_transceiver_switch,
 };
 
+static struct platform_device *devices[] __initdata = {
+#if IS_ENABLED(CONFIG_LEDS_PWM)
+	&leds_pwm,
+#endif
+};
+
 static void __init ek_board_init(void)
 {
 	/* Serial */
@@ -437,9 +471,14 @@ static void __init ek_board_init(void)
 	at91_add_device_ac97(&ek_ac97_data);
 	/* LEDs */
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
-	at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
+	pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup));
+#if IS_ENABLED(CONFIG_LEDS_PWM)
+	at91_add_device_pwm(1 << AT91_PWM1);
+#endif
 	/* CAN */
 	at91_add_device_can(&ek_can_data);
+	/* Other platform devices */
+	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
 MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
-- 
1.9.1