[PATCHv2 00/15] move at91 and avr32 to the PWM framework, remove obsolete drivers
Alexandre Belloni
alexandre.belloni at free-electrons.com
Wed May 28 16:20:03 PDT 2014
Hi,
Greg, the whole series has been acked by all the maintainers but you. I know
that Nicolas was volunteering to take it but maybe you can take it for
3.16. Else, I believe it will have to wait for 3.17.
This patch set switches the at91 and avr32 SoCs and board to the generic PWM
framework. This allows to remove the obsolete leds-atmel-pwm, atmel-pwm-bl and
atmel_pwm drivers.
The first 6 patches take care of the AT91 boards and removes a useless function
in the process.
Patch 7 makes pwm-atmel buildable for AVR32
Patches 8-12 take care of the AVR32 boards. This has only been compile tested as
I don't own any of those boards.
And the last 3 patches are removing the now obsolete drivers.
As a note, the atmel_pwm driver has two features not yet available through
pwm-atmel:
- it is possible to pass an IRQ handler that will get called each time one of
the channel period has been achieved.
- it was possible to set clka and clkb, two clock that divided mck before
feeding the pwm controller.
Those features are not used by anything in the mainline. I'm not sure we can
implement the first one. We'll get back the second one once all the boards have
switched to the common clock framework.
Changes in v2:
- rebased on next-20140528 because of the dependency on the pwm tree
- removed the now unnecessary patch to pwm_bl
- moved to the new PWM_LOOKUP macro
Alexandre Belloni (15):
ARM: at91: at91sam9g45: switch to generic PWM framework
ARM: at91: sam9m10g45ek: use generic leds_pwm driver
ARM: at91: at91sam9263: switch to generic PWM framework
ARM: at91: sam9263ek: use generic leds_pwm driver
ARM: at91: at91sam9rl: switch to generic PWM framework
ARM: at91: remove useless at91_pwm_leds()
PWM: atmel: allow building for AVR32
avr32/at32ap: switch to the generic PWM framework
avr32: MRMT: use generic leds_pwm driver
avr32: merisc: use generic leds_pwm driver
avr32: favr-32: use generic pwm_bl driver
avr32: update defconfig to use the generic PWM framework
backlight: atmel-pwm-bl: remove obsolete driver
leds: atmel-pwm: remove obsolete driver
misc: atmel_pwm: remove obsolete driver
arch/arm/mach-at91/at91sam9263.c | 1 +
arch/arm/mach-at91/at91sam9263_devices.c | 11 +-
arch/arm/mach-at91/at91sam9g45.c | 1 +
arch/arm/mach-at91/at91sam9g45_devices.c | 11 +-
arch/arm/mach-at91/at91sam9rl.c | 1 +
arch/arm/mach-at91/at91sam9rl_devices.c | 11 +-
arch/arm/mach-at91/board-sam9263ek.c | 55 +++-
arch/arm/mach-at91/board-sam9m10g45ek.c | 42 ++-
arch/arm/mach-at91/board.h | 1 -
arch/arm/mach-at91/leds.c | 37 ---
arch/avr32/boards/atngw100/mrmt.c | 34 ++-
arch/avr32/boards/favr-32/setup.c | 48 ++--
arch/avr32/boards/merisc/setup.c | 34 ++-
arch/avr32/configs/atngw100_mrmt_defconfig | 5 +-
arch/avr32/configs/atstk1002_defconfig | 5 +-
arch/avr32/configs/atstk1003_defconfig | 5 +-
arch/avr32/configs/atstk1004_defconfig | 5 +-
arch/avr32/configs/atstk1006_defconfig | 5 +-
arch/avr32/configs/favr-32_defconfig | 6 +-
arch/avr32/configs/merisc_defconfig | 5 +-
arch/avr32/mach-at32ap/at32ap700x.c | 7 +-
drivers/leds/Kconfig | 8 -
drivers/leds/Makefile | 1 -
drivers/leds/leds-atmel-pwm.c | 149 -----------
drivers/misc/Kconfig | 10 -
drivers/misc/Makefile | 1 -
drivers/misc/atmel_pwm.c | 402 -----------------------------
drivers/pwm/Kconfig | 2 +-
drivers/video/backlight/Kconfig | 11 -
drivers/video/backlight/Makefile | 1 -
drivers/video/backlight/atmel-pwm-bl.c | 223 ----------------
include/linux/atmel-pwm-bl.h | 43 ---
include/linux/atmel_pwm.h | 70 -----
33 files changed, 186 insertions(+), 1065 deletions(-)
delete mode 100644 drivers/leds/leds-atmel-pwm.c
delete mode 100644 drivers/misc/atmel_pwm.c
delete mode 100644 drivers/video/backlight/atmel-pwm-bl.c
delete mode 100644 include/linux/atmel-pwm-bl.h
delete mode 100644 include/linux/atmel_pwm.h
--
1.9.1
More information about the linux-arm-kernel
mailing list