[PATCH v5 4/5] ARM: tegra: Add efuse and apbmisc bindings

Peter De Schrijver pdeschrijver at nvidia.com
Wed May 28 05:54:36 PDT 2014


Add efuse and apbmisc bindings for Tegra20, Tegra30, Tegra114 and Tegra124.

Signed-off-by: Peter De Schrijver <pdeschrijver at nvidia.com>
---
 .../devicetree/bindings/fuse/fuse-tegra.txt        |   30 ++++++++++++++++++++
 .../devicetree/bindings/misc/nvidia,apbmisc.txt    |   13 ++++++++
 arch/arm/boot/dts/tegra114.dtsi                    |   12 ++++++++
 arch/arm/boot/dts/tegra124.dtsi                    |   12 ++++++++
 arch/arm/boot/dts/tegra20.dtsi                     |   12 ++++++++
 arch/arm/boot/dts/tegra30.dtsi                     |   12 ++++++++
 6 files changed, 91 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/fuse/fuse-tegra.txt
 create mode 100644 Documentation/devicetree/bindings/misc/nvidia,apbmisc.txt

diff --git a/Documentation/devicetree/bindings/fuse/fuse-tegra.txt b/Documentation/devicetree/bindings/fuse/fuse-tegra.txt
new file mode 100644
index 0000000..831ce50
--- /dev/null
+++ b/Documentation/devicetree/bindings/fuse/fuse-tegra.txt
@@ -0,0 +1,30 @@
+NVIDIA Tegra20/Tegra30/Tegr114/Tegra124 fuse block.
+
+Required properties:
+- compatible : should be:
+	"nvidia,tegra20-efuse"
+	"nvidia,tegra30-efuse"
+	"nvidia,tegra114-efuse"
+	"nvidia,tegra124-efuse"
+  Details:
+  nvidia,tegra20-efuse: Tegra20 requires using APB DMA to read the fuse data
+	due to a hardware bug. Tegra20 also lacks certain information which is
+	available in later generations such as fab code, lot code, wafer id,..
+  nvidia,tegra30-efuse, nvidia,tegra114-efuse and nvidia,tegra124-efuse:
+	The differences between these SoCs are the size of the efuse array,
+	the location of the spare (OEM programmable) bits and the location of
+	the speedo data.
+- reg: Should contain 1 entry: the entry gives the physical address and length
+       of the fuse registers.
+- clocks: Should contain a pointer to the fuse clock.
+
+Example:
+
+        fuse at 7000f800 {
+                compatible = "nvidia,tegra20-efuse";
+                reg = <0x7000F800 0x400>,
+                      <0x70000000 0x400>;
+                clocks = <&tegra_car TEGRA20_CLK_FUSE>;
+        };
+
+
diff --git a/Documentation/devicetree/bindings/misc/nvidia,apbmisc.txt b/Documentation/devicetree/bindings/misc/nvidia,apbmisc.txt
new file mode 100644
index 0000000..b97b8be
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/nvidia,apbmisc.txt
@@ -0,0 +1,13 @@
+NVIDIA Tegra20/Tegra30/Tegr114/Tegra124 apbmisc block
+
+Required properties:
+- compatible : should be:
+       "nvidia,tegra20-apbmisc"
+       "nvidia,tegra30-apbmisc"
+       "nvidia,tegra114-apbmisc"
+       "nvidia,tegra124-apbmisc"
+- reg: Should contain 2 entries: the first entry gives the physical address
+       and length of the registers which contain revision and debug features.
+       The second entry gives the physical address and length of the
+       registers indicating the strapping options.
+
diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
index fdc559a..d91a601 100644
--- a/arch/arm/boot/dts/tegra114.dtsi
+++ b/arch/arm/boot/dts/tegra114.dtsi
@@ -220,6 +220,12 @@
 		interrupt-controller;
 	};
 
+        apbmisc at 0x70000800 {
+		compatible = "nvidia,tegra114-apbmisc", "nvidia,tegra20-apbmisc";
+		reg = <0x70000800 0x64   /* Chip revision */
+		       0x70000008 0x04>; /* Strapping options */
+	};
+
 	pinmux: pinmux at 70000868 {
 		compatible = "nvidia,tegra114-pinmux";
 		reg = <0x70000868 0x148		/* Pad control registers */
@@ -485,6 +491,12 @@
 		clock-names = "pclk", "clk32k_in";
 	};
 
+	fuse at 7000f800 {
+		compatible = "nvidia,tegra114-efuse";
+		reg = <0x7000f800 0x400>;
+		clocks = <&tegra_car TEGRA114_CLK_FUSE>;
+	};
+
 	iommu at 70019010 {
 		compatible = "nvidia,tegra114-smmu", "nvidia,tegra30-smmu";
 		reg = <0x70019010 0x02c
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index 6d540a0..e5bd036 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -167,6 +167,12 @@
 		#dma-cells = <1>;
 	};
 
+	apbmisc at 0x70000800 {
+		compatible = "nvidia,tegra124-apbmisc", "nvidia,tegra20-apbmisc";
+		reg = <0x0 0x70000800 0x0 0x64>,   /* Chip revision */
+		      <0x0 0x7000E864 0x0 0x04>;   /* Strapping options */
+	};
+
 	pinmux: pinmux at 0,70000868 {
 		compatible = "nvidia,tegra124-pinmux";
 		reg = <0x0 0x70000868 0x0 0x164>, /* Pad control registers */
@@ -437,6 +443,12 @@
 		clock-names = "pclk", "clk32k_in";
 	};
 
+	fuse at 7000f800 {
+		compatible = "nvidia,tegra124-efuse";
+		reg = <0x0 0x7000f800 0x0 0x400>;
+		clocks = <&tegra_car TEGRA124_CLK_FUSE>;
+	};
+
 	sdhci at 0,700b0000 {
 		compatible = "nvidia,tegra124-sdhci";
 		reg = <0x0 0x700b0000 0x0 0x200>;
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index a7ddf70..b5d1fe1 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -236,6 +236,12 @@
 		interrupt-controller;
 	};
 
+        apbmisc at 0x70000800 {
+		compatible = "nvidia,tegra20-apbmisc";
+		reg = <0x70000800 0x64   /* Chip revision */
+		       0x70000008 0x04>; /* Strapping options */
+	};
+
 	pinmux: pinmux at 70000014 {
 		compatible = "nvidia,tegra20-pinmux";
 		reg = <0x70000014 0x10   /* Tri-state registers */
@@ -545,6 +551,12 @@
 		#size-cells = <0>;
 	};
 
+	fuse at 7000f800 {
+		compatible = "nvidia,tegra20-efuse";
+		reg = <0x7000F800 0x400>;
+		clocks = <&tegra_car TEGRA20_CLK_FUSE>;
+	};
+
 	pcie-controller at 80003000 {
 		compatible = "nvidia,tegra20-pcie";
 		device_type = "pci";
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index dec4fc8..bd4969d 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -335,6 +335,12 @@
 		interrupt-controller;
 	};
 
+        apbmisc at 0x70000800 {
+		compatible = "nvidia,tegra30-apbmisc", "nvidia,tegra20-apbmisc";
+		reg = <0x70000800 0x64   /* Chip revision */
+		       0x70000008 0x04>; /* Strapping options */
+	};
+
 	pinmux: pinmux at 70000868 {
 		compatible = "nvidia,tegra30-pinmux";
 		reg = <0x70000868 0xd4    /* Pad control registers */
@@ -631,6 +637,12 @@
 		nvidia,ahb = <&ahb>;
 	};
 
+	fuse at 7000f800 {
+		compatible = "nvidia,tegra30-efuse";
+		reg = <0x7000f800 0x400>;
+		clocks = <&tegra_car TEGRA30_CLK_FUSE>;
+	};
+
 	ahub at 70080000 {
 		compatible = "nvidia,tegra30-ahub";
 		reg = <0x70080000 0x200
-- 
1.7.7.rc0.72.g4b5ea.dirty




More information about the linux-arm-kernel mailing list