[PATCH v3 02/14] ARM: KVM: fix vgic V7 assembler code to work in BE image

Marc Zyngier marc.zyngier at arm.com
Tue May 27 07:24:27 PDT 2014


On 13/05/14 17:13, Victor Kamensky wrote:
> The vgic h/w registers are little endian; when BE asm code
> reads/writes from/to them, it needs to do byteswap after/before.
> Byteswap code uses ARM_BE8 wrapper to add swap only if
> CONFIG_CPU_BIG_ENDIAN is configured.
> 
> Signed-off-by: Victor Kamensky <victor.kamensky at linaro.org>
> Reviewed-by: Christoffer Dall <christoffer.dall at linaro.org>
> ---
>  arch/arm/kvm/interrupts_head.S | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/arch/arm/kvm/interrupts_head.S b/arch/arm/kvm/interrupts_head.S
> index 76af9302..e627858 100644
> --- a/arch/arm/kvm/interrupts_head.S
> +++ b/arch/arm/kvm/interrupts_head.S
> @@ -1,4 +1,5 @@
>  #include <linux/irqchip/arm-gic.h>
> +#include <asm/assembler.h>
>  
>  #define VCPU_USR_REG(_reg_nr)	(VCPU_USR_REGS + (_reg_nr * 4))
>  #define VCPU_USR_SP		(VCPU_USR_REG(13))
> @@ -420,6 +421,14 @@ vcpu	.req	r0		@ vcpu pointer always in r0
>  	ldr	r8, [r2, #GICH_ELRSR0]
>  	ldr	r9, [r2, #GICH_ELRSR1]
>  	ldr	r10, [r2, #GICH_APR]
> +ARM_BE8(rev	r3, r3	)
> +ARM_BE8(rev	r4, r4	)
> +ARM_BE8(rev	r5, r5	)
> +ARM_BE8(rev	r6, r6	)
> +ARM_BE8(rev	r7, r7	)
> +ARM_BE8(rev	r8, r8	)
> +ARM_BE8(rev	r9, r9	)
> +ARM_BE8(rev	r10, r10	)
>  
>  	str	r3, [r11, #VGIC_CPU_HCR]
>  	str	r4, [r11, #VGIC_CPU_VMCR]
> @@ -439,6 +448,7 @@ vcpu	.req	r0		@ vcpu pointer always in r0
>  	add	r3, r11, #VGIC_CPU_LR
>  	ldr	r4, [r11, #VGIC_CPU_NR_LR]
>  1:	ldr	r6, [r2], #4
> +ARM_BE8(rev	r6, r6	)
>  	str	r6, [r3], #4
>  	subs	r4, r4, #1
>  	bne	1b
> @@ -466,6 +476,9 @@ vcpu	.req	r0		@ vcpu pointer always in r0
>  	ldr	r3, [r11, #VGIC_CPU_HCR]
>  	ldr	r4, [r11, #VGIC_CPU_VMCR]
>  	ldr	r8, [r11, #VGIC_CPU_APR]
> +ARM_BE8(rev	r3, r3	)
> +ARM_BE8(rev	r4, r4	)
> +ARM_BE8(rev	r8, r8	)
>  
>  	str	r3, [r2, #GICH_HCR]
>  	str	r4, [r2, #GICH_VMCR]
> @@ -476,6 +489,7 @@ vcpu	.req	r0		@ vcpu pointer always in r0
>  	add	r3, r11, #VGIC_CPU_LR
>  	ldr	r4, [r11, #VGIC_CPU_NR_LR]
>  1:	ldr	r6, [r3], #4
> +ARM_BE8(rev	r6, r6  )
>  	str	r6, [r2], #4
>  	subs	r4, r4, #1
>  	bne	1b
> 

Acked-by: Marc Zyngier <marc.zyngier at arm.com>

	M.

-- 
Jazz is not dead. It just smells funny...



More information about the linux-arm-kernel mailing list