[PATCH 22/22] ARM: sun8i: dt: Add Ippo-q8h v5 support

[Maxime Ripard]

On Mon, May 26, 2014 at 12:23:09PM +0800, Chen-Yu Tsai wrote:
> On Mon, May 26, 2014 at 3:39 AM, Maxime Ripard
> <maxime.ripard at free-electrons.com> wrote:
> > On Fri, May 23, 2014 at 03:51:25PM +0800, Chen-Yu Tsai wrote:
> >> The Ippo-q8h is a tablet circiut board commonly found in cheap Android
> >> tablets with A23 SoCs. There are at least 2 versions of the board, with
> >> different peripherals, such as WiFi chips.
> >>
> >> This patch add supports for v5 of such boards, which has a ESP8089 WiFi
> >> chip (not supported) connected to mmc1.
> >>
> >> Signed-off-by: Chen-Yu Tsai <wens at csie.org>
> >> ---
> >>  arch/arm/boot/dts/Makefile                  |  2 ++
> >>  arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts | 51 +++++++++++++++++++++++++++++
> >>  2 files changed, 53 insertions(+)
> >>  create mode 100644 arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts
> >>
> >> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> >> index 6967393..f809a53 100644
> >> --- a/arch/arm/boot/dts/Makefile
> >> +++ b/arch/arm/boot/dts/Makefile
> >> @@ -354,6 +354,8 @@ dtb-$(CONFIG_MACH_SUN7I) += \
> >>       sun7i-a20-cubietruck.dtb \
> >>       sun7i-a20-i12-tvbox.dtb \
> >>       sun7i-a20-olinuxino-micro.dtb
> >> +dtb-$(CONFIG_MACH_SUN8I) += \
> >> +     sun8i-a23-ippo-q8h-v5.dtb
> >>  dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
> >>       tegra20-iris-512.dtb \
> >>       tegra20-medcom-wide.dtb \
> >> diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts
> >> new file mode 100644
> >> index 0000000..7d0bd97
> >> --- /dev/null
> >> +++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts
> >> @@ -0,0 +1,51 @@
> >> +/*
> >> + * Copyright 2014 Chen-Yu Tsai
> >> + *
> >> + * Chen-Yu Tsai <wens at csie.org>
> >> + *
> >> + * The code contained herein is licensed under the GNU General Public
> >> + * License. You may obtain a copy of the GNU General Public License
> >> + * Version 2 or later at the following locations:
> >> + *
> >> + * http://www.opensource.org/licenses/gpl-license.html
> >> + * http://www.gnu.org/copyleft/gpl.html
> >> + */
> >> +
> >> +/dts-v1/;
> >> +/include/ "sun8i-a23.dtsi"
> >> +
> >> +/ {
> >> +     model = "Ippo Q8H Dual Core Tablet (v5)";
> >> +     compatible = "ippo,q8h-v5", "allwinner,sun8i-a23";
> >> +
> >> +     chosen {
> >> +             bootargs = "earlyprintk console=ttyS0,115200";
> >> +     };
> >
> > You should probably add the memory node here too.
> 
> OK.
> 
> >> +
> >> +     soc at 01c00000 {
> >> +             uart0: serial at 01c28000 {
> >> +                     pinctrl-names = "default";
> >> +                     pinctrl-0 = <&uart0_pins_a>;
> >> +                     status = "okay";
> >> +             };
> >> +
> >> +             i2c0: i2c at 01c2ac00 {
> >> +                     pinctrl-names = "default";
> >> +                     pinctrl-0 = <&i2c0_pins_a>;
> >> +                     status = "okay";
> >> +             };
> >> +
> >> +             i2c1: i2c at 01c2b000 {
> >> +                     pinctrl-names = "default";
> >> +                     pinctrl-0 = <&i2c1_pins_a>;
> >> +                     status = "okay";
> >> +             };
> >
> > What are the two i2c busses wired to?
> 
> i2c0 has the capacitive touch panel controller gsl1680 @ 0x40.
> 
> i2c1 has something (gsensor maybe) connected @ 0x15.
> The FEX file lists the gsensor on i2c1, but with the address as 0x18.
> I may need to boot back to stock Android to figure it out.
> 
> i2c2 has the camera sensor (GC0309) control connected to it @ 0x66.
> I didn't list it because I overlooked it, and i2cdetect hangs.
> It seems to need AXP PMIC support to activate the regulators.
> 
> AFAIK, the kernel doesn't have drivers for these devices,
> so how would we list them?

We don't need to list them yet. We can just wait for the drivers, it
was just out of curiosity.

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140527/48aa0138/attachment-0001.sig>