[PATCHv4 2/4] ARM: Kirkwood: Add DT descriptions for net2big and net5big.
Andrew Lunn
andrew at lunn.ch
Mon May 26 12:29:49 PDT 2014
Describe LaCie 2Big and 5Big Network v2 using device tree.
Signed-off-by: Andrew Lunn <andrew at lunn.ch>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
---
v1->v2
Fix size of memory
Clean up ethernet nodes
s/at/atmel/
v2->v3
gpio_poweroff->gpio-poweroff
gpio_key->gpio-key
s/ok/okay
Remove spi pinctrl properties.
v3->v4
Add _v2 to compatible name of devices
Fix SoC version to 6281
tabification of DT files
Add fan controller and clock node for fan controller
---
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/kirkwood-net2big.dts | 30 ++++++
arch/arm/boot/dts/kirkwood-net5big.dts | 83 +++++++++++++++
arch/arm/boot/dts/kirkwood-netxbig.dtsi | 180 ++++++++++++++++++++++++++++++++
4 files changed, 295 insertions(+)
create mode 100644 arch/arm/boot/dts/kirkwood-net2big.dts
create mode 100644 arch/arm/boot/dts/kirkwood-net5big.dts
create mode 100644 arch/arm/boot/dts/kirkwood-netxbig.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 629eee22e606..facbf0cc2fca 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -118,6 +118,8 @@ kirkwood := \
kirkwood-lsxhl.dtb \
kirkwood-mplcec4.dtb \
kirkwood-mv88f6281gtw-ge.dtb \
+ kirkwood-net2big.dtb \
+ kirkwood-net5big.dtb \
kirkwood-netgear_readynas_duo_v2.dtb \
kirkwood-netgear_readynas_nv+_v2.dtb \
kirkwood-ns2.dtb \
diff --git a/arch/arm/boot/dts/kirkwood-net2big.dts b/arch/arm/boot/dts/kirkwood-net2big.dts
new file mode 100644
index 000000000000..a98deccee59f
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-net2big.dts
@@ -0,0 +1,30 @@
+/*
+ * Device Tree file for LaCie 2Big Network v2
+ *
+ * Copyright (C) 2014
+ *
+ * Andrew Lunn <andrew at lunn.ch>
+ *
+ * Based on netxbig_v2-setup.c,
+ * Copyright (C) 2010 Simon Guinot <sguinot at lacie.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-netxbig.dtsi"
+
+/ {
+ model = "LaCie 2Big Network v2";
+ compatible = "lacie,net2big_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/kirkwood-net5big.dts b/arch/arm/boot/dts/kirkwood-net5big.dts
new file mode 100644
index 000000000000..f665fcd6005b
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-net5big.dts
@@ -0,0 +1,83 @@
+/*
+ * Device Tree file for LaCie 5Big Network v2
+ *
+ * Copyright (C) 2014
+ *
+ * Andrew Lunn <andrew at lunn.ch>
+ *
+ * Based on netxbig_v2-setup.c,
+ * Copyright (C) 2010 Simon Guinot <sguinot at lacie.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-netxbig.dtsi"
+
+/ {
+ model = "LaCie 5Big Network v2";
+ compatible = "lacie,net2big_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>;
+ };
+
+};
+
+®ulators {
+ regulator at 3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "hdd2power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 19 GPIO_ACTIVE_HIGH>;
+ };
+
+ regulator at 4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "hdd3power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+ };
+
+ regulator at 5 {
+ compatible = "regulator-fixed";
+ reg = <5>;
+ regulator-name = "hdd4power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&mdio {
+ ethphy1: ethernet-phy at 1 {
+ reg = <0>;
+ };
+};
+
+ð1 {
+ status = "okay";
+ ethernet1-port at 0 {
+ phy-handle = <ðphy1>;
+ };
+};
+
diff --git a/arch/arm/boot/dts/kirkwood-netxbig.dtsi b/arch/arm/boot/dts/kirkwood-netxbig.dtsi
new file mode 100644
index 000000000000..fd75720547e3
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-netxbig.dtsi
@@ -0,0 +1,180 @@
+/*
+ * Device Tree common file for LaCie 2Big and 5Big Network v2
+ *
+ * Copyright (C) 2014
+ *
+ * Andrew Lunn <andrew at lunn.ch>
+ *
+ * Based on netxbig_v2-setup.c,
+ * Copyright (C) 2010 Simon Guinot <sguinot at lacie.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ stdout-path = &uart0;
+ };
+
+ ocp at f1000000 {
+ serial at 12000 {
+ status = "okay";
+ };
+
+ spi at 10600 {
+ status = "okay";
+
+ flash at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mxicy,mx25l4005a";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ mode = <0>;
+
+ partition at 0 {
+ reg = <0x0 0x80000>;
+ label = "u-boot";
+ };
+ };
+ };
+
+ sata at 80000 {
+ status = "okay";
+ nr-ports = <2>;
+ };
+
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /*
+ * button at 1 and button at 2 represent a three position rocker
+ * switch. Thus the conventional KEY_POWER does not fit
+ */
+ button at 1 {
+ label = "Back power switch (on|auto)";
+ linux,code = <KEY_ESC>;
+ linux,input-type = <5>;
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+ button at 2 {
+ label = "Back power switch (auto|off)";
+ linux,code = <KEY_1>;
+ linux,input-type = <5>;
+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+ };
+ button at 3 {
+ label = "Function button";
+ linux,code = <KEY_OPTION>;
+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ };
+
+ };
+
+ gpio-poweroff {
+ compatible = "gpio-poweroff";
+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ regulators: regulators {
+ status = "okay";
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+
+ regulator at 1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "hdd0power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+ };
+
+ regulator at 2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "hdd1power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+ };
+
+ clocks {
+ g762_clk: g762-oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy0: ethernet-phy at 0 {
+ reg = <8>;
+ };
+
+ ethphy1: ethernet-phy at 1 {
+ reg = <0>;
+ };
+};
+
+ð0 {
+ status = "okay";
+ ethernet0-port at 0 {
+ phy-handle = <ðphy0>;
+ };
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+
+ pmx_button_function: pmx-button-function {
+ marvell,pins = "mpp34";
+ marvell,function = "gpio";
+ };
+ pmx_button_power_off: pmx-button-power-off {
+ marvell,pins = "mpp15";
+ marvell,function = "gpio";
+ };
+ pmx_button_power_on: pmx-button-power-on {
+ marvell,pins = "mpp13";
+ marvell,function = "gpio";
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ eeprom at 50 {
+ compatible = "atmel,24c04";
+ pagesize = <16>;
+ reg = <0x50>;
+ };
+
+ g762 at 3e {
+ compatible = "gmt,g762";
+ reg = <0x3e>;
+ clocks = <&g762_clk>;
+ };
+};
--
2.0.0.rc2
More information about the linux-arm-kernel
mailing list