[PATCH 01/11] pinctrl: sunxi: create irq/pin mapping during init

[Hans de Goede]

From: Chen-Yu Tsai <wens at csie.org>

The irq/pin mapping is used to lookup the pin to mux to the irq
function when the irq is enabled. It is created when gpio_to_irq
is called. Creating the mapping during init allows us to map the
interrupts directly from the device tree.

Signed-off-by: Chen-Yu Tsai <wens at csie.org>
Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 drivers/pinctrl/sunxi/pinctrl-sunxi.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
index f6522b5..db9ccd6 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
@@ -529,8 +529,6 @@ static int sunxi_pinctrl_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
 	if (!desc)
 		return -EINVAL;
 
-	pctl->irq_array[desc->irqnum] = offset;
-
 	dev_dbg(chip->dev, "%s: request IRQ for GPIO %d, return %d\n",
 		chip->label, offset + chip->base, desc->irqnum);
 
@@ -731,6 +729,9 @@ static int sunxi_pinctrl_build_state(struct platform_device *pdev)
 		struct sunxi_desc_function *func = pin->functions;
 
 		while (func->name) {
+			/* Create interrupt mapping while we're at it */
+			if (!strcmp(func->name, "irq"))
+				pctl->irq_array[func->irqnum] = pin->pin.number;
 			sunxi_pinctrl_add_function(pctl, func->name);
 			func++;
 		}
-- 
1.9.3