[PATCH v3 01/11] clk: composite: support determine_rate using rate_ops->round_rate + mux_ops->set_parent
Heiko Stübner
heiko at sntech.de
Fri May 23 12:33:23 PDT 2014
From: Boris BREZILLON <b.brezillon at overkiz.com>
In case the rate_hw does not implement determine_rate, but only round_rate
we fallback to best_parent selection if mux_hw is present and support
reparenting.
Signed-off-by: Boris BREZILLON <b.brezillon at overkiz.com>
This also fixes a rate calculation problem when using the standard div and
mux ops, as in this case currently only the mux->determine_rate is used
in the composite rate calculation.
[fixed the output to actually return a rate instead of the diff]
Signed-off-by: Heiko Stuebner <heiko at sntech.de>
---
drivers/clk/clk-composite.c | 51 ++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 50 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/clk-composite.c b/drivers/clk/clk-composite.c
index 57a078e..0a4cd21 100644
--- a/drivers/clk/clk-composite.c
+++ b/drivers/clk/clk-composite.c
@@ -64,11 +64,59 @@ static long clk_composite_determine_rate(struct clk_hw *hw, unsigned long rate,
const struct clk_ops *mux_ops = composite->mux_ops;
struct clk_hw *rate_hw = composite->rate_hw;
struct clk_hw *mux_hw = composite->mux_hw;
+ struct clk *parent;
+ unsigned long parent_rate;
+ long tmp_rate, best_rate;
+ unsigned long rate_diff;
+ unsigned long best_rate_diff = ULONG_MAX;
+ int i;
if (rate_hw && rate_ops && rate_ops->determine_rate) {
rate_hw->clk = hw->clk;
return rate_ops->determine_rate(rate_hw, rate, best_parent_rate,
best_parent_p);
+ } else if (rate_hw && rate_ops && rate_ops->round_rate &&
+ mux_hw && mux_ops && mux_ops->set_parent) {
+ *best_parent_p = NULL;
+
+ if (__clk_get_flags(hw->clk) & CLK_SET_RATE_NO_REPARENT) {
+ *best_parent_p = clk_get_parent(mux_hw->clk);
+ *best_parent_rate = __clk_get_rate(*best_parent_p);
+
+ return rate_ops->round_rate(rate_hw, rate,
+ best_parent_rate);
+ }
+
+ for (i = 0; i < __clk_get_num_parents(mux_hw->clk); i++) {
+ parent = clk_get_parent_by_index(mux_hw->clk, i);
+ if (!parent)
+ continue;
+
+ parent_rate = __clk_get_rate(parent);
+
+ tmp_rate = rate_ops->round_rate(rate_hw, rate,
+ &parent_rate);
+ if (tmp_rate < 0)
+ continue;
+
+ if (tmp_rate < rate)
+ rate_diff = rate - tmp_rate;
+ else
+ rate_diff = tmp_rate - rate;
+
+ if (!rate_diff || !*best_parent_p
+ || best_rate_diff > rate_diff) {
+ *best_parent_p = parent;
+ *best_parent_rate = parent_rate;
+ best_rate_diff = rate_diff;
+ best_rate = tmp_rate;
+ }
+
+ if (!rate_diff)
+ return rate;
+ }
+
+ return best_rate;
} else if (mux_hw && mux_ops && mux_ops->determine_rate) {
mux_hw->clk = hw->clk;
return mux_ops->determine_rate(mux_hw, rate, best_parent_rate,
@@ -196,7 +244,8 @@ struct clk *clk_register_composite(struct device *dev, const char *name,
composite->rate_hw = rate_hw;
composite->rate_ops = rate_ops;
clk_composite_ops->recalc_rate = clk_composite_recalc_rate;
- if (rate_ops->determine_rate)
+ if (rate_ops->determine_rate ||
+ (rate_ops->round_rate && clk_composite_ops->set_parent))
clk_composite_ops->determine_rate = clk_composite_determine_rate;
}
--
1.9.0
More information about the linux-arm-kernel
mailing list