[PATCH 59/71] ARM: sun6i: a31: Add support for the High Speed Timers

[Daniel Lezcano]

From: Maxime Ripard <maxime.ripard at free-electrons.com>

The Allwinner A31 has support for four high speed timers. Apart for the
number of timers (4 vs 2), it's basically the same logic than the high
speed timers found in the sun5i chips.

Now that we have a driver to support it, we can enable them in the
device tree.

Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano at linaro.org>
---
 arch/arm/boot/dts/sun6i-a31.dtsi |   11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index d45efa7..8cee8a1 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -428,6 +428,17 @@
 			status = "disabled";
 		};
 
+		timer at 01c60000 {
+			compatible = "allwinner,sun6i-a31-hstimer", "allwinner,sun7i-a20-hstimer";
+			reg = <0x01c60000 0x1000>;
+			interrupts = <0 51 4>,
+				     <0 52 4>,
+				     <0 53 4>,
+				     <0 54 4>;
+			clocks = <&ahb1_gates 19>;
+			resets = <&ahb1_rst 19>;
+		};
+
 		spi0: spi at 01c68000 {
 			compatible = "allwinner,sun6i-a31-spi";
 			reg = <0x01c68000 0x1000>;
-- 
1.7.9.5