[PATCH v3 0/3] ARM: dts: overo: Add panel support

[Florian Vaussard]

Hi Tomi,

On 05/20/2014 03:58 PM, Florian Vaussard wrote:
> Hi,
> 
> This series enables the DVI and LCD panels present on some of
> the Overo expansion boards.
> 

Do you have any more comments on these? If no, do you want to pull them
through your tree for 3.16, as discussed with Tony?

Regards,

Florian

> DVI output:
> - Tobi
> - Summit
> 
> LCD (3.5''):
> - Alto35
> 
> LCD (4.3''):
> - Chestnut43
> - Palo43
> - Gallop43
> 
> I tested on Tobi, Alto35 and Gallop43.
> 
> This series depends on several patches from Tomi [1][2][3] targeting 3.16.
> 
> Regards,
> Florian
> 
> Since v2:
> - Use gpio-backlight
> Since v1:
> - Rebased on 3.15-rc4 + recent patches from Tomi
> 
> [1] http://thread.gmane.org/gmane.linux.ports.arm.omap/114572
> [2] http://thread.gmane.org/gmane.linux.ports.arm.omap/114560
> [3] http://lists.infradead.org/pipermail/linux-arm-kernel/2014-January/227101.html
> 
> Florian Vaussard (3):
>   ARM: dts: overo: Add support for DVI output
>   ARM: dts: overo: Add support for 4.3'' LCD output
>   ARM: dts: overo: Add support for 3.5'' LCD output
> 
>  arch/arm/boot/dts/omap3-overo-alto35-common.dtsi   |   1 +
>  .../boot/dts/omap3-overo-chestnut43-common.dtsi    |   1 +
>  arch/arm/boot/dts/omap3-overo-common-dvi.dtsi      | 111 +++++++++++++
>  arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi    | 165 +++++++++++++++++++
>  arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi    | 178 +++++++++++++++++++++
>  arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi |   1 +
>  arch/arm/boot/dts/omap3-overo-palo43-common.dtsi   |   1 +
>  arch/arm/boot/dts/omap3-overo-summit-common.dtsi   |   1 +
>  arch/arm/boot/dts/omap3-overo-tobi-common.dtsi     |   1 +
>  9 files changed, 460 insertions(+)
>  create mode 100644 arch/arm/boot/dts/omap3-overo-common-dvi.dtsi
>  create mode 100644 arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
>  create mode 100644 arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
>