[PATCH 4/8] ARM: STi: DT: Add sdhci controller for stih416

[Lee Jones]

On Thu, 22 May 2014, Peter Griffin wrote:

> This patch adds device tree config for both sdhci controllers
> on the stih416 SoC.
> 
> Signed-off-by: Peter Griffin <peter.griffin at linaro.org>
> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro at st.com>
> ---
>  arch/arm/boot/dts/stih416.dtsi | 24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
> index 06473c5..a035df0 100644
> --- a/arch/arm/boot/dts/stih416.dtsi
> +++ b/arch/arm/boot/dts/stih416.dtsi
> @@ -236,5 +236,29 @@
>  			resets	= <&powerdown STIH416_KEYSCAN_POWERDOWN>,
>  				  <&softreset STIH416_KEYSCAN_SOFTRESET>;
>  		};
> +
> +		mmc0: sdhci at fe81e000 {
> +			compatible = "st,sdhci";
> +			status = "disabled";
> +			reg = <0xfe81e000 0x1000>;
> +			interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>;
> +			interrupt-names = "mmcirq";
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_mmc0>;
> +			clock-names     = "mmc";
> +			clocks = <&clk_s_a1_ls 1>;
> +		};
> +
> +		mmc1: sdhci at fe81f000 {
> +			compatible = "st,sdhci";
> +			status = "disabled";
> +			reg = <0xfe81f000 0x1000>;
> +			interrupts = <GIC_SPI 128 IRQ_TYPE_NONE>;
> +			interrupt-names = "mmcirq";
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_mmc1>;
> +			clock-names     = "mmc";
> +			clocks = <&clk_s_a1_ls 8>;
> +		};

Line these up and make them look pretty too.

After that:

  Acked-by: Lee Jones <lee.jones at linaro.org>

>  	};
>  };

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog