[PATCH 3/8] ARM: STi: DT: Add sdhci pins for stih416

[Peter Griffin]

This adds the required pin config for both SDHCI controllers on
the stih416 SoC.

Signed-off-by: Peter Griffin <peter.griffin at linaro.org>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro at st.com>
---
 arch/arm/boot/dts/stih416-pinctrl.dtsi | 39 ++++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi
index 6252188..140af6b 100644
--- a/arch/arm/boot/dts/stih416-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi
@@ -467,6 +467,45 @@
 					};
 				};
 			};
+
+			mmc0 {
+				pinctrl_mmc0: mmc0 {
+					st,pins {
+						mmcclk = <&PIO13 4 ALT4 BIDIR_PU NICLK 0 CLK_B>;
+						data0 = <&PIO14 4 ALT4 BIDIR_PU BYPASS 0>;
+						data1 = <&PIO14 5 ALT4 BIDIR_PU BYPASS 0>;
+						data2 = <&PIO14 6 ALT4 BIDIR_PU BYPASS 0>;
+						data3 = <&PIO14 7 ALT4 BIDIR_PU BYPASS 0>;
+						cmd = <&PIO15 1 ALT4 BIDIR_PU BYPASS 0>;
+						wp = <&PIO15 3 ALT4 IN>;
+						data4 = <&PIO16 4 ALT4 BIDIR_PU BYPASS 0>;
+						data5 = <&PIO16 5 ALT4 BIDIR_PU BYPASS 0>;
+						data6 = <&PIO16 6 ALT4 BIDIR_PU BYPASS 0>;
+						data7 = <&PIO16 7 ALT4 BIDIR_PU BYPASS 0>;
+						pwr = <&PIO17 1 ALT4 OUT>;
+						cd = <&PIO17 2 ALT4 IN>;
+						led = <&PIO17 3 ALT4 OUT>;
+					};
+				};
+			};
+			mmc1 {
+				pinctrl_mmc1: mmc1 {
+					st,pins {
+						mmcclk = <&PIO15 0 ALT3 BIDIR_PU NICLK 0 CLK_B>;
+						data0 = <&PIO13 7 ALT3 BIDIR_PU BYPASS 0>;
+						data1 = <&PIO14 1 ALT3 BIDIR_PU BYPASS 0>;
+						data2 = <&PIO14 2 ALT3 BIDIR_PU BYPASS 0>;
+						data3 = <&PIO14 3 ALT3 BIDIR_PU BYPASS 0>;
+						cmd = <&PIO15 4 ALT3 BIDIR_PU BYPASS 0>;
+						data4 = <&PIO15 6 ALT3 BIDIR_PU BYPASS 0>;
+						data5 = <&PIO15 7 ALT3 BIDIR_PU BYPASS 0>;
+						data6 = <&PIO16 0 ALT3 BIDIR_PU BYPASS 0>;
+						data7 = <&PIO16 1 ALT3 BIDIR_PU BYPASS 0>;
+						pwr = <&PIO16 2 ALT3 OUT>;
+						nreset = <&PIO13 6 ALT3 OUT>;
+					};
+				};
+			};
 		};
 
 		pin-controller-fvdp-fe {
-- 
1.9.1