[Patch v5 0/7] Introduce keystone reset driver

[Santosh Shilimkar]

Ivan,

On Thursday 22 May 2014 09:48 AM, Ivan Khoronzhuk wrote:
> These patches introduce keystone reset driver.
> 
> The keystone SoC can be rebooted in several ways. By external reset
> pin, by soft and by watchdogs. This driver allows software reset and reset
> by one of the watchdogs. Also added opportunity to set soft/hard reset type.
> 
> Based on linux-next/master
> 
> v5..v4
>   power: reset: keystone-reset: introduce keystone reset driver
>   	- changed to get rsmux and rspll offsets from DT
>   clock: keystone-pllctrl: add bindings for keystone pll controller
>   	- new patch
>   mfd: ti-keystone-devctrl: add bindings for device state control
>   	- new patch
>   power: reset: add bindings for keystone reset driver
>   	- corrected description of "ti,syscon-pll", "ti,syscon-dev" properties
> 	- corrected examples
>   ARM: dts: keystone: update reset node to work with reset driver
>   	- added nodes for pll-controller and device-state-controll
> 	- added offsets to "ti,syscon-pll", "ti,syscon-dev" properties
>
Looks like you haven't collected Arnd's Reviewed-by tag on the patches.
Can be added later as well while applying.


 
> v4..v3
>   Power: reset: keystone-reset: introduce keystone reset driver
>   	- changed to use syscon framework
>   	- changed to use regmap to access registers
>   Power: reset: add bindings for keystone reset driver
>   	- deleted properties "reg", "reg-names"
> 	- added properties "ti,syscon-pll", "ti,syscon-dev"
>   ARM: dts: keystone: update reset node to work with reset driver
>   	- deleted properties "reg", "reg-names"
> 	- added properties "ti,syscon-pll", "ti,syscon-dev"
> 
> v2..v3
>   Power: reset: keystone-reset: introduce keystone reset driver
> 	- no functional changes, only sanity
>   Power: reset: add bindings for keystone reset driver
>   	- corrected WDT numeration in examples
> 	- extended description of wdt_list property
> 
> v1..v2
> 	- re based on v3.15-rc1 without changes
> 
> Ivan Khoronzhuk (7):
>   power: reset: keystone-reset: introduce keystone reset driver
>   clock: keystone-pllctrl: add bindings for keystone pll controller
>   mfd: ti-keystone-devctrl: add bindings for device state control
>   power: reset: add bindings for keystone reset driver
>   ARM: keystone: remove redundant reset stuff
>   ARM: dts: keystone: update reset node to work with reset driver
>   ARM: keystone: enable reset driver support
> 
>  .../bindings/clock/ti-keystone-pllctrl.txt         |  20 +++
>  .../bindings/mfd/ti-keystone-devctrl.txt           |  19 +++
>  .../bindings/power/reset/keystone-reset.txt        |  67 +++++++++
>  arch/arm/boot/dts/keystone.dtsi                    |  14 +-
>  arch/arm/configs/keystone_defconfig                |   3 +
>  arch/arm/mach-keystone/keystone.c                  |  34 -----
>  drivers/power/reset/Kconfig                        |   8 +
>  drivers/power/reset/Makefile                       |   1 +
>  drivers/power/reset/keystone-reset.c               | 166 +++++++++++++++++++++
>  9 files changed, 297 insertions(+), 35 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt
>  create mode 100644 Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt
>  create mode 100644 Documentation/devicetree/bindings/power/reset/keystone-reset.txt
>  create mode 100644 drivers/power/reset/keystone-reset.c
>