[PATCH v5 2/6] dt-bindings: add mtk-timer bindings

[Sören Brinkmann]

Hi Matthias,

On Wed, 2014-05-21 at 06:26PM +0200, Matthias Brugger wrote:
> Add binding documentation for the General Porpose Timer driver of

Typo: Purpose

> the Mediatek SoCs.
> 
> Signed-off-by: Matthias Brugger <matthias.bgg at gmail.com>
> ---
>  .../devicetree/bindings/timer/mediatek,mtk-timer.txt   | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
> 
> diff --git a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
> new file mode 100644
> index 0000000..7d909f7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
> @@ -0,0 +1,18 @@
> +Mediatek MT6577, MT6572 and MT6589 Timers
> +---------------------------------------
> +
> +Required properties:
> +- compatible: Should be "mediatek,mtk6577-timer"
> +- reg: Should contain location and length for timers register.
> +- clocks: Clocks driving the timer hardware. This list shoud include two
> +	clocks. The order is system clock and as second clock the RTC clock.
> +
> +Examples:
> +
> +	timer {

The node name should be timer at 0x10008000

> +		compatible = "mediatek,mtk6577-timer";
> +		reg = <0x10008000 0x80>;
> +		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>;
> +		clocks = <&system_clk>, <&rtc_clk>;
> +		clock-names = "system-clk", "rtc-clk";

I'm still not convinced that the timer IP calls its clock inputs this
way, but well.

Other than that ACK.

	Sören