[PATCH v2] s3cmci: port DMA code to dmaengine API
Vasily Khoruzhick
anarsoul at gmail.com
Tue May 20 13:20:59 PDT 2014
Utilise new s3c24xx-dma dmaengine driver for DMA ops.
Signed-off-by: Vasily Khoruzhick <anarsoul at gmail.com>
---
v2: - Don't store async dma descriptor, it's not used
- Request DMA channel via dma_request_slave_channel_compat() and use
hardcoded DMA channel.
- Add dependency on S3C24XX_DMAC (s3cmci uses filter function from it)
drivers/mmc/host/Kconfig | 10 +--
drivers/mmc/host/s3cmci.c | 174 +++++++++++++---------------------------------
drivers/mmc/host/s3cmci.h | 4 +-
3 files changed, 52 insertions(+), 136 deletions(-)
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 1384f67..e70e4cf 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -420,6 +420,7 @@ config MMC_SPI
config MMC_S3C
tristate "Samsung S3C SD/MMC Card Interface support"
depends on ARCH_S3C24XX
+ select S3C24XX_DMAC
help
This selects a driver for the MCI interface found in
Samsung's S3C2410, S3C2412, S3C2440, S3C2442 CPUs.
@@ -457,15 +458,6 @@ config MMC_S3C_DMA
working properly and needs to be debugged before this
option is useful.
-config MMC_S3C_PIODMA
- bool "Support for both PIO and DMA"
- help
- Compile both the PIO and DMA transfer routines into the
- driver and let the platform select at run-time which one
- is best.
-
- See notes for the DMA option.
-
endchoice
config MMC_SDRICOH_CS
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index f237826..9b38fc9 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -12,6 +12,7 @@
*/
#include <linux/module.h>
+#include <linux/dmaengine.h>
#include <linux/dma-mapping.h>
#include <linux/clk.h>
#include <linux/mmc/host.h>
@@ -27,6 +28,7 @@
#include <mach/dma.h>
#include <mach/gpio-samsung.h>
+#include <linux/platform_data/dma-s3c24xx.h>
#include <linux/platform_data/mmc-s3cmci.h>
#include "s3cmci.h"
@@ -140,10 +142,6 @@ static const int dbgmap_debug = dbg_err | dbg_debug;
dev_dbg(&host->pdev->dev, args); \
} while (0)
-static struct s3c2410_dma_client s3cmci_dma_client = {
- .name = "s3c-mci",
-};
-
static void finalize_request(struct s3cmci_host *host);
static void s3cmci_send_request(struct mmc_host *mmc);
static void s3cmci_reset(struct s3cmci_host *host);
@@ -256,25 +254,8 @@ static inline bool s3cmci_host_usedma(struct s3cmci_host *host)
{
#ifdef CONFIG_MMC_S3C_PIO
return false;
-#elif defined(CONFIG_MMC_S3C_DMA)
+#else /* CONFIG_MMC_S3C_DMA */
return true;
-#else
- return host->dodma;
-#endif
-}
-
-/**
- * s3cmci_host_canpio - return true if host has pio code available
- *
- * Return true if the driver has been compiled with the PIO support code
- * available.
- */
-static inline bool s3cmci_host_canpio(void)
-{
-#ifdef CONFIG_MMC_S3C_PIO
- return true;
-#else
- return false;
#endif
}
@@ -841,11 +822,9 @@ static irqreturn_t s3cmci_irq_cd(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static void s3cmci_dma_done_callback(struct s3c2410_dma_chan *dma_ch,
- void *buf_id, int size,
- enum s3c2410_dma_buffresult result)
+static void s3cmci_dma_done_callback(void *arg)
{
- struct s3cmci_host *host = buf_id;
+ struct s3cmci_host *host = arg;
unsigned long iflags;
u32 mci_csta, mci_dsta, mci_fsta, mci_dcnt;
@@ -856,45 +835,17 @@ static void s3cmci_dma_done_callback(struct s3c2410_dma_chan *dma_ch,
BUG_ON(!host->mrq);
BUG_ON(!host->mrq->data);
- BUG_ON(!host->dmatogo);
spin_lock_irqsave(&host->complete_lock, iflags);
- if (result != S3C2410_RES_OK) {
- dbg(host, dbg_fail, "DMA FAILED: csta=0x%08x dsta=0x%08x "
- "fsta=0x%08x dcnt:0x%08x result:0x%08x toGo:%u\n",
- mci_csta, mci_dsta, mci_fsta,
- mci_dcnt, result, host->dmatogo);
-
- goto fail_request;
- }
-
- host->dmatogo--;
- if (host->dmatogo) {
- dbg(host, dbg_dma, "DMA DONE Size:%i DSTA:[%08x] "
- "DCNT:[%08x] toGo:%u\n",
- size, mci_dsta, mci_dcnt, host->dmatogo);
-
- goto out;
- }
-
- dbg(host, dbg_dma, "DMA FINISHED Size:%i DSTA:%08x DCNT:%08x\n",
- size, mci_dsta, mci_dcnt);
+ dbg(host, dbg_dma, "DMA FINISHED\n");
host->dma_complete = 1;
host->complete_what = COMPLETION_FINALIZE;
-out:
tasklet_schedule(&host->pio_tasklet);
spin_unlock_irqrestore(&host->complete_lock, iflags);
- return;
-fail_request:
- host->mrq->data->error = -EINVAL;
- host->complete_what = COMPLETION_FINALIZE;
- clear_imask(host);
-
- goto out;
}
static void finalize_request(struct s3cmci_host *host)
@@ -966,7 +917,7 @@ static void finalize_request(struct s3cmci_host *host)
* DMA channel and the fifo to clear out any garbage. */
if (mrq->data->error != 0) {
if (s3cmci_host_usedma(host))
- s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH);
+ dmaengine_terminate_all(host->dma);
if (host->is2440) {
/* Clear failure register and reset fifo. */
@@ -992,29 +943,6 @@ request_done:
mmc_request_done(host->mmc, mrq);
}
-static void s3cmci_dma_setup(struct s3cmci_host *host,
- enum dma_data_direction source)
-{
- static enum dma_data_direction last_source = -1;
- static int setup_ok;
-
- if (last_source == source)
- return;
-
- last_source = source;
-
- s3c2410_dma_devconfig(host->dma, source,
- host->mem->start + host->sdidata);
-
- if (!setup_ok) {
- s3c2410_dma_config(host->dma, 4);
- s3c2410_dma_set_buffdone_fn(host->dma,
- s3cmci_dma_done_callback);
- s3c2410_dma_setflags(host->dma, S3C2410_DMAF_AUTOSTART);
- setup_ok = 1;
- }
-}
-
static void s3cmci_send_command(struct s3cmci_host *host,
struct mmc_command *cmd)
{
@@ -1162,43 +1090,45 @@ static int s3cmci_prepare_pio(struct s3cmci_host *host, struct mmc_data *data)
static int s3cmci_prepare_dma(struct s3cmci_host *host, struct mmc_data *data)
{
- int dma_len, i;
int rw = data->flags & MMC_DATA_WRITE;
+ struct dma_async_tx_descriptor *desc;
+ struct dma_slave_config conf = {
+ .src_addr = host->mem->start + host->sdidata,
+ .dst_addr = host->mem->start + host->sdidata,
+ .src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
+ .dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
+ };
BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR);
- s3cmci_dma_setup(host, rw ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
- s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH);
-
- dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
- rw ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-
- if (dma_len == 0)
- return -ENOMEM;
-
- host->dma_complete = 0;
- host->dmatogo = dma_len;
-
- for (i = 0; i < dma_len; i++) {
- int res;
-
- dbg(host, dbg_dma, "enqueue %i: %08x@%u\n", i,
- sg_dma_address(&data->sg[i]),
- sg_dma_len(&data->sg[i]));
+ /* Restore prescaler value */
+ writel(host->prescaler, host->base + S3C2410_SDIPRE);
- res = s3c2410_dma_enqueue(host->dma, host,
- sg_dma_address(&data->sg[i]),
- sg_dma_len(&data->sg[i]));
+ if (!rw)
+ conf.direction = DMA_DEV_TO_MEM;
+ else
+ conf.direction = DMA_MEM_TO_DEV;
- if (res) {
- s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH);
- return -EBUSY;
- }
- }
+ dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+ rw ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
- s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_START);
+ dmaengine_slave_config(host->dma, &conf);
+ desc = dmaengine_prep_slave_sg(host->dma, data->sg, data->sg_len,
+ conf.direction,
+ DMA_CTRL_ACK | DMA_PREP_INTERRUPT);
+ if (!desc)
+ goto unmap_exit;
+ desc->callback = s3cmci_dma_done_callback;
+ desc->callback_param = host;
+ dmaengine_submit(desc);
+ dma_async_issue_pending(host->dma);
return 0;
+
+unmap_exit:
+ dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+ rw ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+ return -ENOMEM;
}
static void s3cmci_send_request(struct mmc_host *mmc)
@@ -1676,10 +1606,6 @@ static int s3cmci_probe(struct platform_device *pdev)
host->complete_what = COMPLETION_NONE;
host->pio_active = XFER_NONE;
-#ifdef CONFIG_MMC_S3C_PIODMA
- host->dodma = host->pdata->use_dma;
-#endif
-
host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!host->mem) {
dev_err(&pdev->dev,
@@ -1765,17 +1691,17 @@ static int s3cmci_probe(struct platform_device *pdev)
/* depending on the dma state, get a dma channel to use. */
if (s3cmci_host_usedma(host)) {
- host->dma = s3c2410_dma_request(DMACH_SDI, &s3cmci_dma_client,
- host);
- if (host->dma < 0) {
+ dma_cap_mask_t mask;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+
+ host->dma = dma_request_slave_channel_compat(mask,
+ s3c24xx_dma_filter, (void *)DMACH_SDI, &pdev->dev, "rx-tx");
+ if (!host->dma) {
dev_err(&pdev->dev, "cannot get DMA channel.\n");
- if (!s3cmci_host_canpio()) {
- ret = -EBUSY;
- goto probe_free_gpio_wp;
- } else {
- dev_warn(&pdev->dev, "falling back to PIO.\n");
- host->dodma = 0;
- }
+ ret = -EBUSY;
+ goto probe_free_gpio_wp;
}
}
@@ -1816,7 +1742,7 @@ static int s3cmci_probe(struct platform_device *pdev)
mmc->max_segs = 128;
dbg(host, dbg_debug,
- "probe: mode:%s mapped mci_base:%p irq:%u irq_cd:%u dma:%u.\n",
+ "probe: mode:%s mapped mci_base:%p irq:%u irq_cd:%u dma:%p.\n",
(host->is2440?"2440":""),
host->base, host->irq, host->irq_cd, host->dma);
@@ -1852,7 +1778,7 @@ static int s3cmci_probe(struct platform_device *pdev)
probe_free_dma:
if (s3cmci_host_usedma(host))
- s3c2410_dma_free(host->dma, &s3cmci_dma_client);
+ dma_release_channel(host->dma);
probe_free_gpio_wp:
if (!host->pdata->no_wprotect)
@@ -1914,7 +1840,7 @@ static int s3cmci_remove(struct platform_device *pdev)
tasklet_disable(&host->pio_tasklet);
if (s3cmci_host_usedma(host))
- s3c2410_dma_free(host->dma, &s3cmci_dma_client);
+ dma_release_channel(host->dma);
free_irq(host->irq, host);
diff --git a/drivers/mmc/host/s3cmci.h b/drivers/mmc/host/s3cmci.h
index c76b53d..cc2e46c 100644
--- a/drivers/mmc/host/s3cmci.h
+++ b/drivers/mmc/host/s3cmci.h
@@ -26,7 +26,7 @@ struct s3cmci_host {
void __iomem *base;
int irq;
int irq_cd;
- int dma;
+ struct dma_chan *dma;
unsigned long clk_rate;
unsigned long clk_div;
@@ -36,8 +36,6 @@ struct s3cmci_host {
int is2440;
unsigned sdiimsk;
unsigned sdidata;
- int dodma;
- int dmatogo;
bool irq_disabled;
bool irq_enabled;
--
1.9.3
More information about the linux-arm-kernel
mailing list